화학공학소재연구정보센터
Macromolecular Research, Vol.19, No.9, 943-947, September, 2011
Enhanced Impact Properties of Polylactide by Poly(lactide-b-butadiene-b-lactide) Triblock Copolymer
E-mail:
Polylactide (PLA) was copolymerized with polybutadiene (PBD) to improve its impact properties. Triblock copolymers of poly(lactide-b-butadiene-b-lactide) (PLBDL) were obtained by the ring opening polymerization of lactide using tin 2-ethylhexanoate (Sn(Oct)2) and hydroxyl terminated polybutadiene (HTPBD) as a catalyst and macroinitiator, respectively. PLA and PLBDL were blended at 5, 10, and 15 wt% PLBDL. After blending, the samples exhibited a shift in the Tg of PLA, which means that PLBDL and PLA are compatible. The tensile strength and Young’s modulus decreased with increasing PLBDL. On the other hand, the PLA/PLBDL blend containing 10wt% PLBDL showed a 4 fold increase in impact strength. In addition, the elongation at break of the blend containing 10 wt% PLBDL was 467%, showing a 27 fold increase compared to neat PLA. This suggests that the PBD chains on the PLBDL backbone have a significant effect on the impact properties of PLA.
  1. Chandra R, Rustgi R, Prog. Polym. Sci, 23, 1273 (1998)
  2. Drumright RE, Gruber PR, Henton DE, Adv. Mater., 12(23), 1841 (2000)
  3. Jacobsen S, Fritz HG, Polym. Eng. Sci., 39(7), 1303 (1999)
  4. Jacobsen S, Degee PH, Fritz HG, Dubois PH, Jerome R, Polym. Eng. Sci., 39(7), 1311 (1999)
  5. Park YJ, Nam KH, Ha SJ, Pai CM, Chung CP, Lee SJ, J. Control. Release, 43, 151 (1997)
  6. Hofmann GO, Liedtke H, Ruckdeschel G, Lob G, Clin. Mater., 6, 137 (1990)
  7. Chen C, Lv G, Pan C, Song M, Chunhui W, Biomaterials, 2, L1 (2007)
  8. Tsourapas G, Rutten FJM, Briggs D, Davies MC, Shakesheff KM, Appl. Surf. Sci., 252(19), 6693 (2006)
  9. Kale G, Kijchavengkul T, Auras R, Rubino M, Selke SE, Singh SP, Macromol. Biosci., 7, 255 (2007)
  10. Kale G, Auras R, Singh SP, Narayan R, Polym. Test, 26, 1049 (2007)
  11. Joziasse CAP, Veenstra H, Grijpma DW, Pennings AJ, Macromol. Chem. Phys., 197, 2219 (1996)
  12. Ishida S, Nagasaki R, Chino K, Dong T, Inoue Y, J. Appl. Polym. Sci., 113(1), 558 (2009)
  13. Hu Y, Hu YS, Topolkaraev V, Hiltner A, Baer E, Polymer, 44(19), 5681 (2003)
  14. Hu Y, Hu YS, Topolkaraev V, Hiltner A, Baer E, Polymer, 44(19), 5711 (2003)
  15. Li Y, Shimizu H, Eur. Polym. J., 45, 738 (2009)
  16. Helfand E, Macromolecules, 8, 4 (1975)
  17. Ji SX, Hoye TR, Macosko CW, Macromolecules, 37(15), 5485 (2004)
  18. Ishida S, Nagasaki R, Chino K, Dong T, Inoue Y, J. Appl. Polym. Sci., 113(1), 558 (2009)
  19. Hillmyer MA, Nguyen ST, Grubbs RH, Macromolecules, 30(4), 718 (1997)
  20. Kricheldorf HR, Kreisersaunders I, Boettcher C, Polymer, 36(6), 1253 (1995)
  21. Piorkowska E, Argon AS, Cohen RE, Polymer, 34, 4435 (1993)