Journal of Applied Polymer Science

Journal of Applied Polymer Science, Vol.118, No.1 Entire volume, number list

ISSN: 0021-8995 (Print)

In this Issue (78 articles)

1 - 6	Effect of Surface Modification on Ionic Permeability Across Cellophane Membrane Banihashemi A, Vakili MR, Meratian S
7 - 16	Reduction of Dissolved Oxygen in Boiler Water Using New Redox Polymers Waterlot C, Couturier D
17 - 24	Effect of Long-Term Natural Aging on the Thermal, Mechanical, and Viscoelastic Behavior of Biomedical Grade of Ultra High Molecular Weight Polyethylene Fouad H
25 - 29	Preparation and Thermal Stability of Brominated Natural Rubber from Latex Xue XH, Wu YH, Wang FP, Ling J, Fu X
30 - 41	Effective Reinforcement of Carbon Nanotubes in Polypropylene Matrices Deng H, Bilotti E, Zhang R, Peijs T
42 - 51	Novel Negatively Charged Hybrids. 2. Preparation of Silica-Based Hybrid Copolymers and Their Applications for Cu2+ Removal Hu KY, Liu JS, Wo HZ, Li T
52 - 62	Catalytic Oxidation of Organic Substrates Using a Reusable Polystyrene-Anchored Orthometallated Palladium(II) Complex Islam M, Mondal P, Roy AS, Tuhina K
63 - 68	Study on the Synthesis, Structure, and Properties of Polydimethylsiloxane-Acrylate/Organophilic Montmorillonite Nanocomposite Emulsions Li HQ, Zeng XR, Deng HP
69 - 73	Synthesis and Characterization of Poly(4-diphenylaminostyrene)-Poly(9-vinylanthracene) Binary Block Copolymer Natori I, Natori S, Sekikawa H, Takahashi T, Sato H
74 - 80	Synthesis and Properties of Polymer from Bis-3,4-ethylenedioxythiophene Substituted Acenaphthenequinoxaline Matsidik R, Mamtimin X, Mi HY, Nurulla I
81 - 90	Preparation and Characterization of Elastomer-Based Nanocomposite Gels Using an Unique Latex Blending Technique Mitra S, Chattopadhyay S, Bhowmick AK
91 - 98	Thermally Induced Solid-State Synthesis of Fluorine-Containing Poly(ether oxadiazole) Maruyama Y, Maeda Y, Wakabayashi K, Yamazaki S, Kimura K
99 - 104	Synthesis and Characterization of Novel Highly Branched Block Copoly(urethane-imide)s Based on Pentaerythritol, Different Diisocyanate and Aromatic Dianhydride Chen WQ, Chen CA, Yan W, Yi CF, Wu SL, Yeung KWK, Xu ZS
105 - 112	Structure and Gas Permeation Properties of Asymmetric Polyimide Membranes Made by Dry-Wet Phase Inversion: Influence of the Polyimide Molecular Weight Seki N, Nagaoka S, Kawakami H
113 - 120	Preparation and Characterization of Polymer/Multiwall Carbon Nanotube/Nanoparticle Nanocomposites and Preparation of Their Metal Complexes Golikand AN, Didehban K
121 - 127	Effect of Filler Loading on the Mechanical Properties of Cross linked 1,2,3-Triazole Polymers Katritzky AR, Sakhuja R, Huang LC, Gyanda R, Wang L, Jackson DC, Ciaramitaro DA, Bedford CD, Duran RS
128 - 134	Mesua ferrea L. Seed Oil-Based Epoxy Resins Das G, Karak N
135 - 142	Studies on Sorption Isotherm Models of Ion Exchange Modified Acrylic Fibers Zargaran M, Shoushtari AM, Abdouss M
143 - 151	Crystalline Morphology of PLA/Clay Nanocomposite Films and Its Correlation with Other Properties Das K, Ray D, Banerjee I, Bandyopadhyay NR, Sengupta S, Mohanty AK, Misra M
152 - 158	Effect of Styrene-Maleic Anhydride as a Reactive Compatibilizer on the Mechanical Properties and Flammability of Intumescent Flame Retardant Polystyrene Chen YJ, Guo ZH, Fang ZP
159 - 164	Water-Soluble Copolymers. V. Synthesis of Low Molecular Weight Amphoteric Polyacrylamide by Foamed Copolymerization Peng XH, Tao ZH, Peng XC
165 - 172	Novel N-ethyl-2-styrylquinolinium Iodides as Sensitizers in the Photoinitiated Free-Radical Polymerization of Trimethylolopropane Triacrylate. II Kabatc J, Krzyzanowska E, Jedrzejewska B, Pietrzak M, Paczkowski J
173 - 179	Experimental Investigation into the Effect of Adhesion Properties of PEEK Modified by Atmospheric Pressure Plasma and Low Pressure Plasma Jha S, Bhowmik S, Bhatnagar N, Bhattacharya NK, Deka U, Iqbal HMS, Benedictus R
180 - 187	Influence of Environmental Conditioning on the Shear Behavior of Poly(phenylene sulfide)/Glass Fiber Composites Costa AP, Botelho EC, Pardini LC
188 - 199	Novel Clay-Based Nanobiocomposites of Biopolyesters with Synergistic Barrier to UV Light, Gas, and Vapour Sanchez-Garcia MD, Lagaron JM
200 - 208	Online Pressure-Volume-Temperature Measurements of Polypropylene Using a Testing Mold to Simulate the Injection-Molding Process Wang JA, Xie PC, Yang WM, Ding YM
209 - 217	Polyamide 66 Binary and Ternary Nanocomposites: Mechanical and Morphological Properties Mert M, Yilmazer U
218 - 228	The Effect of 3-(Trimethoxysilyl) Propyl Methacrylate on the Mechanical, Thermal, and Morphological Properties of Poly(methyl methacrylate)/Hydroxyapatite Composites Tham WL, Chow WS, Ishak ZAM
229 - 240	Solution Polymerization of N-vinylcaprolactam in 1,4-dioxane. Kinetic Dependence on Temperature, Monomer, and Initiator Concentrations Medeiros SF, Barboza JCS, Re MI, Giudici R, Santos AM
241 - 246	A Study on Xe-2* Excilamp Treatment of Wool Fibers Yang M, Yan KL, Zhou AJ
247 - 252	Copper-Ion Adsorption and Gold-Ion Reduction by Polyphenols Prepared by the Enzymatic Reaction of Horseradish Peroxidase Kawakita H, Nakano S, Hamamoto K, Matsunaga Y, Yoshimura Y, Ohto K, Inoue K
253 - 258	Antibacterial Properties of Raw and Degummed Silk with Nanosilver in Various Conditions Moazami A, Montazer M, Rashidi A, Rahimi MK
259 - 265	Facile Method for the Synthesis of Polystyrene-Poly(ethylene glycol) Block Copolymers Feng LB, Gou LXH, Yang JL, Luo YJ, Wang YL
266 - 274	Effect of Weight Ratio of Thermoplastic and Thermosetting Boron-Containing Phenolic Resin on Mechanical, Bonding, and Ablative Properties of Thermal Insulating Composites Gao GX, Zhang ZC, Li XF, Meng QJ, Zheng YS, Jin ZH
275 - 279	Preparation and Characterization of Graphene/Poly(vinyl alcohol) Nanocomposites Jiang L, Shen XP, Wu JL, Shen KC
280 - 290	Hyperbranched Polyester Based on the Core + AB(2) Approach: Synthesis and Structural Investigation Jena KK, Narayan R, Raju KVSN
291 - 298	Interaction Between the Fluorinated Amphiphilic Copolymer Poly(2,2,3,4,4,4-hexafluorobutyl methacrylate)-graft-Poly(SPEG) and DNA Li L, Xiong SD, Wang YX, Song GW, Wu SL, Chu PK, Xu ZS
299 - 305	Preparation of Quaternized Carboxymethyl Chitosan and Its Capacity to Flocculate COD from Printing Wastewater Cai ZS, Yang CS, Zhu XM
306 - 311	The Influence of Montmorillonite on the Anti-Reversion in the Rubber-Clay Composites Zhang P, Huang GS, Wang XA, Nie YJ, Qu LL, Wen GS
312 - 319	Structural, Mechanical and Thermal Studies of Double-Molded Isotactic Polypropylene Nanocomposites with Multiwalled Carbon Nanotubes Mina MF, Haque MA, Bhuiyan MKH, Gafur MA, Tamba Y, Asanos T
320 - 331	Microcellular Foaming of Polymethylmethacrylate in a Batch Supercritical CO2 Process: Effect of Microstructure on Compression Behavior Ruiz JAR, Viot P, Dumon M
332 - 337	Melt Density and Volume Flow Rate of Polypropylene/Al(OH)(3)/Mg(OH)(2) Flame Retardant Composites Liang JZ, Tang CY, Zhang YJ
338 - 345	Study on the Structure-Mechanical Properties Relationship and Antistatic Characteristics of SSBR Composites Filled with SiO2/CB Wang L, Zhao SH
346 - 352	Preparation and Characterization of the Electrospun Nanofibers Loaded with Clarithromycin Wei AF, Wang JA, Wang XQ, Wei QF, Ge MQ, Hou DY
353 - 358	Possible Use of Ultra-Fine Acrylonitrile Butadiene Rubber Powder as Filler in Natural Rubber Vulcanizates Sae-Oui P, Sirisinha C, Thaptong P, Intiya W
359 - 365	Carbon Nanotube Reinforced Rigid-Rod Polyimide Naebe M, Wang J, Xue YH, Wang XG, Lin T
366 - 371	Pressure Dependence of the CO2/Propylene Oxide Copolymerization Catalyzed by Zinc Glutarate Duan JT, Wang JJ, Feng LF, Wang L, Gu XP
372 - 377	Mechanical Reinforcement of Cotton Fabrics by Grafting Polymerization of Acrylics Princi E, Vicini S, Demichelis R, Rombaldoni F, Mazzuchetti G
378 - 384	Enhanced Photodegradation Efficiency of Polyethylene-TiO2 Nanocomposite Film with Oxidized Polyethylene Wax Fa WJ, Yang CJ, Gong CQ, Peng TY, Zan L
385 - 389	Effects of Diatomite on Extrudate Swell Behavior of Polypropylene Composite Melts Liang JZ
390 - 398	Surface Modification of PHBV Films with Different Functional Groups: Thermal Properties and In Vitro Degradation Ke Y, Wang YJ, Ren L, Wu G, Xue W
399 - 404	Rapid Homogeneous Preparation of Cellulose Graft Copolymer in BMIMCL Under Microwave Irradiation Lin CX, Zhan HY, Liu MH, Fu SY, Huang LH
405 - 412	Optimization of Electrospinning an SU-8 Negative Photoresist to Create Patterned Carbon Nanofibers and Nanobeads Steach JK, Clark JE, Olesik SV
413 - 420	Thermal and Optical Properties of Gelatin/Poly(vinyl alcohol) Blends El-Kader FHA, Gafer SA, Basha AF, Bannan SI, Basha MAF
421 - 427	Preparations and Temperature- and pH-Dependent Release Property of Ethylcellulose Microcapsules Containing N-Isopropylacrylamide Copolymer Kang MK, Kim JC
428 - 434	Physical Characterization of a Self-Healing Dental Restorative Material Wertzberger BE, Steere JT, Pfeifer RM, Nensel MA, Latta MA, Gross SM
435 - 445	Influence of the Filler Type on the Rupture Behavior of Filled Elastomers Gherib S, Chazeau L, Pelletier JM, Satha H
446 - 451	Preparation and Characterization of Polyamide-Leather Wastes Polymer Composites Mohamed OA, El Sayed NH, Abdelhakim AA
452 - 461	The Effects of Clay Dispersion on the Mechanical, Physical, and Flame-Retarding Properties of Wood Fiber/Polyethylene/Clay Nanocomposites Lee YH, Kuboki T, Park CB, Sain M, Kontopoulou M
462 - 468	Mass DSC/TG and IR Ascertained Structure and Color Change of Polyacrylonitrile Fibers in Air/Nitrogen During Thermal Stabilization Sun TQ, Hou YP, Wang HJ
469 - 479	Isolation and Chemical Structure Characterization of Enzymatic Lignin from Populus deltoides Wood Abdulkhani A, Karimi A, Mirshokraie A, Hamzeh Y, Marlin N, Mortha G
480 - 485	Flocculated Decolorization of Vinylsulfone Reactive Dye Solutions with a beta-Cyclodextrin-Based Copolymer Tian XZ, Wu D, Zhang J, Wang SG, Jiang X
486 - 495	Competitive Plasticization in Ternary Plasticized Starch Biopolymer System Chaudhary DS
496 - 502	Mechanical Properties and Morphology of Polylactide, Linear Low-Density Polyethylene, and Their Blends Singh G, Bhunia H, Rajor A, Jana RN, Choudhary V
503 - 510	Starch Esters with Improved Mechanical Properties Through Melt Compounding with Nanoclays Nejad MH, Ganster J, Volkert B
511 - 517	Controlling the Architecture of Nanofiber-Coated Microfibers Using Electrospinning Thorvaldsson A, Engstrom J, Gatenholm P, Walkenstrom P
518 - 524	Polyaniline-maleicacid-dodecylhydrogensulfate Salt as Sensor Material for Toxic Gases Palaniappan S, Saravanan C
525 - 537	Aliphatic Polyamidoamine Hyperbranched Polymers/Layered Silicate Nanocomposites Amin A, Taha AS, El-Ghaffar MAA
538 - 546	Solid-State Mechanical Properties of Polypropylene/Nylon 6/Clay Nanocomposites Somwangthanaroj A, Ubankhlong W, Tanthapanichakoon W
547 - 556	Thermal Decomposition Kinetics of Azomethine Oligomer and Its Some Metal Complexes Dogan F, Kaya I, Bilici A, Sacak M
557 - 565	Rheology of Bitumen Modified by EVA-Organoclay Nanocomposites Markanday SS, Stastna J, Polacco G, Filippi S, Kazatchkov I, Zanzotto L
566 - 573	Effect of Organoclay Reinforcement on the Curing Characteristics and Technological Properties of SBR Sulphur Vulcanizates Diez J, Bellas R, Ramirez C, Rodriguez A
574 - 579	Simple Method to Determine Flow Characteristics of Injectable Hydrogels Nadarajan SB, Nguyen A, Kolb JT, Stepanskiy L, Papazoglou ES
580 - 587	Impact Behavior of Hybrid Composite Plates Sayer M, Bektas NB, Callioglu H
588 - 595	Electrospun PEG-PLA Nanofibrous Membrane for Sustained Release of Hydrophilic Antibiotics Xu XL, Zhong W, Zhou SF, Trajtman A, Alfa M
596 - 603	The Effect of Gamma Irradiation on Electrical Characteristics of Au/Polyvinyl Alcohol (Co, Zn-Doped)/n-Si Schottky Barrier Diodes Tascioglu I, Uslu H, Altindal S, Durmus P, Dokme I, Tunc T
604 - 610	Rheological Properties of Elastomer-Modified Polypropylene and Their Influence on the Formation of Flow Marks Iannuzzi G, Rigdahl M
611 - 622	Flammability Characteristics and Performance of Halogen-Free Flame-Retarded Polyoxymethylene Based on Phosphorus-Nitrogen Synergistic Effects Sun SY, He YD, Wang XD, Wu DZ