| 1373 - 1377 |
Adhesion and corrosion resistance properties of modified polystyrenes
Ahmetli G, Kaya A, Ozkececi A |
| 1378 - 1386 |
Some aspects of the mechanical response of BMI 5250-4 neat resin at 191 degrees C: Experiment and modeling
Ruggles-Wrenn MB, Balaconis JG |
| 1387 - 1394 |
Dimethylsilylbis(1-indenyl) zirconium dichloride/methylaluminoxane catalyst supported on nanosized silica for propylene polymerization
Li KT, Ko FS |
| 1395 - 1400 |
Thermal and mechanical properties of a poly(epsilon-caprolactone)/graphite oxide composite
Kai WH, Hirota Y, Hua L, Inoue Y |
| 1401 - 1406 |
Hyperbranched polyesters with internal and exo-presented hydrogen-bond acidic sensor groups for surface acoustic wave sensors
Hartmann-Thompson C, Keeley DL, Voit B, Eichhorn KJ, Mikhaylova Y |
| 1407 - 1413 |
Transitions and relaxations of copolypropylene molecules in copolypropylene-clay composites
Zhong WX, Qiao XY, Cao M, Sun K, Zhang GD |
| 1414 - 1422 |
Macromolecular assemblies of segmented poly(ester urethane)s and poly(ether urethane)s
Ioan S, Lupu M, Epure V, Ioanid A, Macocinschi D |
| 1423 - 1429 |
Influence of post-treatments of porous poly(vinyl alcohl) membranes
Wang YL, Yang H, Xu ZL |
| 1430 - 1438 |
Styrene-assisted grafting of maleic anhydride onto polypropylene by reactive processing
Bettini SHP, Ruvolo AC |
| 1439 - 1448 |
Mechanical properties of crosslinked polyurethane elastomers based on well-defined prepolymers
Krol P, Pilch-Pitera B |
| 1449 - 1458 |
Influence of amino group pK(a) on the properties of stimuli-responsive piperazine-based polymers and hydrogels
Deen GR, Gan LH |
| 1459 - 1465 |
Effect of olive residue benzylation on the thermal and mechanical properties of poly(vinyl chloride)/olive residue composites
Djidjelli H, Boukerrou A, Rabouhi A, Founas R, Kaci M, Zefouni O, Djillah N, Belrnouhoub L |
| 1466 - 1470 |
Development of high-absorbent light-weight sanitary napkin
Das A, Kothari VK, Makhija S, Avyaya K |
| 1471 - 1478 |
Laser scanning confocal microscope characterization of dye diffusion in nylon 6 fibers treated with atmospheric pressure plasmas
Wang CX, Zhu L, Qiu YP |
| 1479 - 1486 |
Effect of the different rigidity of the chiral crosslinker on phase behaviors of side-chain chiral liquid crystalline elastomers
Zhang BY, He XZ, Liao QF, Zhou QH |
| 1487 - 1492 |
Preparation of isotacticity-rich poly(tert-butyl vinyl ether) by the cationic polymerization of tert-butyl vinyl ether with dimethyl [rac-ethylenebis (indenyl)]zirconium and tri(pentafluorophenyl)borane
Kwon OW, Noh SK, Lyoo WS |
| 1493 - 1499 |
Curing kinetics study of an epoxy resin system for T800 carbon fiber filament wound composites by dynamic and isothermal DSC
Chen WM, Li P, Yu YH, Yang XP |
| 1500 - 1506 |
Superabsorbent hydrogel composed of covalently crosslinked gum arabic with fast swelling dynamics
Favaro SL, de Oliveira F, Reis AV, Guilherme MR, Muniz EC, Tambourgi EB |
| 1507 - 1516 |
Effect of maleic anhydride grafted polypropylene on the mechanical and morphological properties of chemically modified short-pineapple-leaf-fiber-reinforced polypropylene composites
Hujuri U, Chattopadhay SK, Uppaluri R, Ghoshal AK |
| 1517 - 1522 |
Properties of diallyl phthalate resin modified with phthalic allyl ester having a hydroxyl group
Ohtsuka K, Matsumoto A, Kimura H |
| 1523 - 1529 |
Dynamic photorheological analysis of photopolymerizable urethane dimethacrylate resins with varying diluent content and light fluence
Piguet-Ruinet F, Love BJ |
| 1530 - 1538 |
Fabrication of superhydrophobic silica-based surfaces with high transmittance by using polypropylene and tetraeyhoxysilane precursors
Chang KC, Chen YK, Chen H |
| 1539 - 1546 |
Synthesis and electrochemical properties of phloroglucin-based ferrocenyl compounds and their application in anion recognition
Deng LB, Wang L, Yu HJ, Wang JJ, Dong XC, Li JH, Tan QH, Huo J |
| 1547 - 1554 |
Materials selection and residual solvent retention in biodegradable electrospun fibers
Nam J, Huang Y, Agarwal S, Lannuttil J |
| 1555 - 1562 |
Curing characteristics of urea-formaldehyde resin in the presence of various amounts of wood extracts and catalysts
Gao ZH, Wang XM, Wan H, Liu Y |
| 1563 - 1567 |
Yttria-polystyrene-polypropylene composite for fine dyeable fibers
Yu CB, Jiang C, Chen YM |
| 1568 - 1572 |
Preparation and properties of physically crosslinked sodium carboxymethylcellulose/poly(vinyl alcohol) complex hydrogels
Xiao CM, Gao YK |
| 1573 - 1577 |
Clear polyurethane dispersions of nanometer size derived from carboxylic polycaprolactonediols
Lee DK, Tsai HB, Tsai RS |
| 1578 - 1583 |
Removal of phosphate ions with a chemically modified chitosan/metal-ion complex
Shimizu Y, Nakamura S, Saito Y, Nakamura T |
| 1584 - 1589 |
Effects of laser irradiation on polyester textile properties
Kan CW |
| 1590 - 1597 |
Studies on the steady and dynamic rheological properties of poly(dimethyl-siloxane) filled with calcium carbonate based on superposition of its relative functions
Xu XM, Tao XL, Gao CH, Zheng Q |
| 1598 - 1603 |
Effect of nano-TiO(2)on MP-25 resin
Bin X, Zhang ST, Huang WZ, Hou BR |
| 1604 - 1608 |
Synthesis of poly(epichlorohydrin-g-methyl methacrylate) and poly(epichlorohydrin-g-styrene) graft copolymers by a combination of cationic and photopolymerization methods
Cakmak I, Baykara H, Set B |
| 1609 - 1615 |
Ionic conductivity and morphology of semi-interpenetrating-type polymer electrolyte entrapping poly(siloxane-g-allyl cyanide)
Min KH, Kim DB, Kang YK, Suh DH |
| 1616 - 1620 |
Effect of deaeration processing on the behavior of an acrylonitrile-acrylamide copolymer and carbon fiber precursors
Wang YX, Wang CG, Jing M |
| 1621 - 1627 |
Stereocomplexation and morphology of enantiomeric poly(lactic acid)s with moderate-molecular-weight
Wang Y, Mano JF |
| 1628 - 1634 |
Synthesis, characterization, and thermal properties of tris (3-aminophenyl) phosphine oxide-based nadimide resins
Darshan, Sharma P, Malhotra P, Narula AK |
| 1635 - 1641 |
Effects of cyclic compression and thermal aging on dynamic properties of neoprene rubber bearings
Chou HW, Huang JS |
| 1642 - 1646 |
Lewis acid-base property of P(VDF-co-HFP) measured by inverse gas chromatography
Shi BL, He MJ |
| 1647 - 1654 |
UV polymerization-based surface modification technique for the production of bioactive packaging
Kothapalli A, Morgan M, Sadler G |
| 1655 - 1660 |
Chemical modification of multiwalled carbon nanotube with the liquid phase method
Chiu WM, Chang YA |
| 1661 - 1669 |
Effect of microencapsulated curing agents on the curing behavior for diglycidyl ether of bisphenot a epoxy resin systems
Xu HX, Fang ZP, Tong LF |
| 1670 - 1677 |
A new generation of fibers from alginic acid for dressing materials
Mikolajczyk T, Wolowska-Czapnik D, Bogun M |
| 1678 - 1685 |
Effect of functional group of ferrocene redox substance on the transport properties of newly designed ion exchange membrane prepared from polymer gel
El Sayed AM, Yamasaki S, Yamauchi A |
| 1686 - 1695 |
Surface functionalization by RF plasma deposition of ethylene diamine, acrylonitrile, and acetonitrile
Jampala SN, Sarmadi M, Manolache S, Denes FS |
| 1696 - 1700 |
The influence of polystyrene and polyvinylpyrrolidone nanofiber on the intensity of photoluminescence of fluorescent whitenine aeents
Wang SG, Yang QB, Bai J, Du JS, Li YX |
| 1701 - 1709 |
Preparation of monodisperse poly(vinyl alcohol) microspheres by heterogeneous surface saponification and iodine complex formation
Lee SG, Lyoo WS |
| 1710 - 1717 |
Synthesis and characterization of air-stable magnetic Fe composites microspheres of narrow size distribution
Shpaisman N, Margel S |
| 1718 - 1723 |
Effects of interfacial adhesion on properties of polypropylene/Wollastonite composites
Chen MJ, Wan CY, Shou WJ, Zhang YX, Zhang Y, Zhang JM |
| 1724 - 1729 |
Synthesis of alkyd resin from Jatropha and Rapeseed oils and their applications in electrical insulation
Patel VC, Varughese J, Krishnamoorthy PA, Jain RC, Singh AK, Ramamoorty M |
| 1730 - 1736 |
Effect of chain architecture on biaxial orientation and oxygen permeability of polypropylene film
Dias P, Lin YJ, Hiltner A, Baer E, Chen HY, Chum SP |
| 1737 - 1743 |
The effect of carbon fiber wear properties of carbon composites content on the friction and fiber reinforced polyimide
Li J, Cheng XH |
| 1744 - 1758 |
Influence of an hyperbranched aliphatic polyester on the cure kinetic of a trifunctional epoxy resin
Frigione M, Calo E |
| 1759 - 1776 |
Radiation synthesis and characterization of 2-hydroxyethyl-methacrylate-based hydrogels containing Di- and Tri-protic acid and its application on wastewater treatment
Abdel-Aal SE, Hegazy ESA, Abou Taleb MF, Dessouki AM |
| 1777 - 1782 |
Pervaporation separation of binary and ternary mixtures with polydimethylsiloxane membranes
Bakhshi A, Mohammadi T, Aroujalian A |
| 1783 - 1792 |
Thermooxidative ageing of polyoxymethylene, Part 1: Chemical aspects
Fayolle B, Verdu J, Bastard M, Piccoz D |
| 1793 - 1802 |
Effect of the chain-transfer-agent content on the emulsion polymerization process and adhesive properties of poly(n-butyl acrylate-co-acrylic acid) latexes
Shen HZ, Zhang JY, Liu SJ, Liu GD, Zhang LQ, Qu XW |
| 1803 - 1808 |
Preparation and performances of ethylene-propylene-diene terpolymer/acrylic rubber reinforced with a dough-modeling compound
Wu WL, Chen DJ |
| 1809 - 1816 |
Preparation and characterization of chloromethylated/quaternized poly(phthalazinone ether sulfone ketone) for positively charged nanofiltration membranes
Yan C, Zhang SH, Yang DL, Jian XG |
| 1817 - 1821 |
Uniaxially aligned poly[(9,9-dioctylfluorenyl-2,7-diyl)-co-bithiophene] thin films characterized by the X-ray diffraction pole figure technique
Werzer O, Matoy K, Smilgies DM, Rothmann MM, Strohriegl P, Resel R |
| 1822 - 1830 |
Experimental characterization of traditional composites manufactured by vacuum-assisted resin-transfer molding
Cecen V, Sarikanat M |
| 1831 - 1841 |
Synthesis, characterization, and comparison of properties of novel fluorinated poly(imide siloxane) copolymers
Ghosh A, Banerjee S |
| 1842 - 1849 |
Synthesis and crystallization behavior of acetal copolymer/silica nanocomposite by in situ cationic ring-opening copolymerization of trioxane and 1,3-dioxolane
Sun LH, Yang ZG, Li XH |
| 1850 - 1856 |
A viscometric study for adsorption of bovine serum albumin onto the inner surface of glass capillary
Li Y, Cai ZC, Zhong WX, Cheng RS |
| 1857 - 1864 |
Effect of core structure on the fluorescence properties of hyperbranched poly(phenylene sulfide)
Xu RL, Liu HW, Liu SY, Li YS, Shi WF |
| 1865 - 1871 |
Novel anion-exchange organic-inorganic hybrid membranes prepared through sol-gel reaction and UV/thermal curing
Wu CM, Wu YH, Xu TW, Fu YX |
| 1872 - 1878 |
Benzylated modification and dyeing of ramie fiber in supercritical carbon dioxide
Liu ZT, Sun ZF, Liu ZW, Lu J, Xiong HP |
| 1879 - 1886 |
Synthesis, characterization, and bactericidal properties of composites based on crosslinked resins containing silver
de Santa Maria LC, Souza JDC, Aguiar MRMP, Wang SH, Mazzei JL, Felzenszwalb I, Amico SC |
| 1887 - 1892 |
Novel chemically synthesized polyaniline electrodes containing a fluoroboric acid dopant for supercapacitors
Palaniappan S, Devi SL |
| 1893 - 1899 |
Surface modification of CNFs via plasma polymerization of styrene monomer and its effect on the properties of PS/CNF nanocomposites
Ramos-deValle LF, Neira-Velazquez MG, Hernandez-Hernandez E |
| 1900 - 1910 |
Utilization of emulsion polymer for preparing bagasse fibers polymer-cement composites
Ismail MR, Youssef HA, Ali MAM, Zahran AH, Afifi MS |
| 1911 - 1916 |
Effects of hot-air aging and dynamic fatigue on the structure and dynamic viscoelastic properties of unfilled natural rubber vulcanizates
Zhang P, Shi XY, Li J, Yu GS, Zhao SG |
| 1917 - 1923 |
Synthesis and characterization of poly(ether-block-amide) membranes for the pervaporation of organic/aqueous mixtures
Mohammadi T, Kikhavandi T, Moghbeli M |
| 1924 - 1931 |
Stability of poly(N-propargylamide)s under ultraviolet irradiation
Deng JP, Li L, Wang JM, Feng G, Yang WT |
| 1932 - 1938 |
Thermal degradation kinetics of epoxy/organically modified montmorillonite nanocomposites
Brnardic I, Macan J, Ivankovic H, Ivankovic M |
| 1939 - 1945 |
Effect of oxygen uptake and aromatization on the skin-core morphology during the oxidative stabilization of polyacrylonitrile fibers
Yu MJ, Wang CG, Bai YJ, Xu Y, Zhu B |
| 1946 - 1953 |
Effect of structure of aromatic imide-amines on curing behavior and thermal stability of diglycidyl ether of bisphenol-A
Sharma P, Choudhary V, Narula AK |
| 1954 - 1959 |
Electrospinning of ultrafine cellulose fibers and fabrication of poly(butylene succinate) biocomposites reinforced by them
Han SO, Son WK, Youk JH, Park WH |
| 1960 - 1966 |
Synthesis and electrorheological properties of polyaniline-coated barium titanate composite particles
Yan H, Liao ZJ, Zhu X, Wang XM, Chen Y, Zhang B, Chen SL, Za ZY |
| 1967 - 1972 |
Microwave hall mobility studies on polymer-metal oxide nanocomposites
Murthy DVB, Subramanian V, Kumar VSP, Natarajan TS, Raghuraman GK, Dhamodharan R, Murthy VRK |
| 1973 - 1980 |
In vitro release study of diltiazem hydrochloride from poly(vinyl pyrrolidone)/sodium alginate blend microspheres
Sanli O, Bicer E, Isiklan N |
| 1981 - 1989 |
Synthesis and characterization of polyaniline-organoclay nanocomposites
Salahuddin N, Ayad MM, Ali M |
| 1990 - 1999 |
Modeling the solids conveying zone of a novel extruder
Jia M, Wang K, Xue P, Zhu F |
| 2000 - 2006 |
Preparation of polyurea microcapsules containing pyrethroid insecticide with hexamethylene diisocyanate isocyanurate
Takahashi T, Taguchi Y, Tanaka M |
| 2007 - 2014 |
The effect of the interface structure of different surface-modified nano-SiO2 on the mechanical properties of nylon 66 composites
Xu XM, Li BJ, Lu HM, Zhang ZJ, Wang HG |
| 2015 - 2021 |
Recycled carbon fiber filled polyethylene composites
McNally T, Boyd P, McClory C, Bien D, Moore I, Millar B |
| 2022 - 2027 |
Using anionic polymerizable surfactants in ultrasonically irradiated emulsion polymerization to prepare polymer nanoparticles
He YH, Cao Y, Fan Y |
| 2028 - 2037 |
Study of the formulations and process conditions in the crosslinking of polyethylene foams at atmospheric pressure
Marcilla A, Garcia-Quesada JC, Beltran MI, Ruiz-Femenia R |
| 2038 - 2044 |
Tensile behavior of PVC-coated woven membrane materials under uni- and bi-axial loads
Chen SH, Ding X, Fangueiro R, Yi HL, Ni J |
| 2045 - 2052 |
Characterization of oxidized cellulose with ultraviolet-visible Spectroscopy
Milichovsky M, Milichovska S |
| 2053 - 2057 |
Correlation between current-voltage (I-V) characteristic in the electric-thermal equilibrium state and resistivity-temperature behavior of electro-conductive silicone rubber
Zhang J, Feng DC, Feng SY, Han JJ, Diao GZ, Liu D |
