| 3327 - 3333 |
Spectral and surface investigations of Mn2+ doped SrZnO2 nanocrystalline phosphors
Bedyal AK, Kumar V, Sharma V, Pitale SS, Coetsee E, Duvenhage MM, Ntwaeaborwa OM, Swart HC |
| 3334 - 3340 |
Electrical charge conductivity behavior of electrodeposited Cu2O/ZnO heterojunction thin films on PET flexible substrates by impedance spectroscopy analysis
Li Q, Xu MM, Fan HQ, Wang HR, Peng BL, Long CB, Zhai YC |
| 3341 - 3346 |
Influence of NH4+ on the preparation of carbonaceous spheres by a hydrothermal process
Qiao L, Chen J, Ying Y, Zheng JW, Jiang LQ |
| 3347 - 3356 |
Rheologic and mechanical properties of multiwalled carbon nanotubes-reinforced poly(trimethylene terephthalate) composites
Gupta A, Choudhary V |
| 3357 - 3362 |
Preparation of stable dispersions of chemically reduced graphene oxide through noncovalent interactions with poly(N-isopropyl acrylamide)-grafted pluronic copolymer
Kim MJ, Kim DW, Yun JS, Lee DH, Oh YJ, Nam JA, Kim SR, Lee JH, Park SY, Min BG, In I |
| 3363 - 3369 |
Microstructure and oxidation behaviors of near-alpha Ti-6.5Al-4Sn-4Zr-0.5Mo-based alloys with Ir addition
Xiao WL, Murakami H, Ping DH, Yamabe-Mitarai Y |
| 3370 - 3377 |
Molecular design and synthesis of branched bichromophore-attached linear fluorinated polyimides for nonlinear optical applications
He M, Zhou YM, Gao YF, Wang YJ, Bu XH, Zhang T, Cui YP, Zhang T |
| 3378 - 3385 |
Structures and properties of SnO2 nanofibers derived from two different polymer intermediates
Xia X, Li SL, Wang X, Liu JX, Wei QF, Zhang XW |
| 3386 - 3394 |
Copper and iron based thin film nanocomposites prepared by radio frequency sputtering. Part I: elaboration and characterization of metal/oxide thin film nanocomposites using controlled in situ reduction process
Barnabe A, Chapelle A, Presmanes L, Tailhades P |
| 3395 - 3403 |
Investigation of the lithium-rich boundary of the Li1+xMn2-xO4 cubic spinel phase in air
Cupid DM, Lehmann T, Bergfeldt T, Berndt H, Seifert HJ |
| 3404 - 3414 |
Post-doping via spray-drying: a novel sol-gel process for the batch synthesis of doped LiNi0.5Mn1.5O4 spinel material
Schroeder M, Glatthaar S, Gesswein H, Winkler V, Bruns M, Scherer T, Chakravadhanula VSK, Binder JR |
| 3415 - 3421 |
Simultaneous functionalization and reduction of graphene oxide with diatom silica
Dalagan JQ, Enriquez EP, Li LJ |
| 3422 - 3427 |
Fabrication of alizarin red S/multi-walled carbon nanotube nanocomposites and their application in hydrogen peroxide detection
Han HT, Wu XR, Wu SJ, Zhang Q, Lu WJ, Zhang HY, Pan DW |
| 3428 - 3435 |
Synthesis of visible-light-responsive Fe(III)-doped TiO2 films using graphene oxide-based composite sheets as sacrificial building blocks
Xu C, Cui AJ, Yuan Y, Chen ZX, Yuan RS, Fu XZ |
| 3436 - 3442 |
Controlled functionalization of graphene oxide through surface modification with acetone
Wu CK, Wang GJ, Dai JF |
| 3443 - 3447 |
The stability and elastic properties of NaCl-type MN (M = Ti, V, Zr, Nb, and Ta) compounds investigated by first principles
Yu R, Jiang YH, Feng J, Zhou RF, Zhang YQ, Zhou R |
| 3448 - 3453 |
The effects of co-sensitization in dye-sensitized solar cells
Lee CL, Lee WH, Yang CH |
| 3454 - 3460 |
Full-field analysis of notch effects of 3D carbon/carbon composites
Qin LJ, Zhang ZW, Feng ZH, Li XF, Wang Y, Wang Y, Miao H, He LH, Gong XL |
| 3461 - 3468 |
High strength glass-ceramics in the system MgO/Y2O3/Al2O3/SiO2/ZrO2 without quartz as crystalline phase
Gawronski A, Russel C |
| 3469 - 3478 |
Viscoelasticity and compaction behaviour of the foam-like pomelo (Citrus maxima) peel
Thielen M, Speck T, Seidel R |
| 3479 - 3485 |
Nanoscale mechanical characterization of PMMA by AFM nanoindentation: a theoretical study on the time-dependent viscoelastic recovery
Ding YH, Deng XH, Jiang X, Zhang P, Yin JR, Jiang Y |
| 3486 - 3493 |
Effect of polymer matrix on the sensitivity of microfibrous fluorescent chemosensor containing dendritic porphyrin for the detection of dopamine
Kim YJ, Seong DY |
| 3494 - 3504 |
Composition-dependent physical properties of poly[(vinylidene fluoride)-co-trifluoroethylene]-poly(ethylene oxide) blends
Costa CM, Machiavello MNT, Ribelles JLG, Lanceros-Mendez S |
| 3505 - 3510 |
Growth mechanism of carbon films from organic electrolytes
Li Y, Zhang GF, Hou XD, Deng DW |
| 3511 - 3516 |
Reduced leakage current and enhanced ferroelectric properties in Mn-doped Bi0.5Na0.5TiO3-based thin films
Hejazi MM, Taghaddos E, Safari A |
| 3517 - 3527 |
Fabrication and characterization of flexible high performance thermoplastic foams derived from rigid polyetherketoneketone via a VOC-free foaming method
Li B, Liu T, Tang ZCW, Zhong WH |
| 3528 - 3534 |
Application of poly(3,4-ethylenedioxythiophene): polystyrenesulfonate in polymer heterojunction solar cells
Li Y, Yue GT, Chen XX, He BL, Chu L, Chen HY, Wu JH, Tang QW |
| 3535 - 3545 |
Combined X-ray and neutron diffraction Rietveld refinement in iron-substituted nano-hydroxyapatite
Kyriacou A, Leventouri T, Chakoumakos BC, Garlea VO, dela Cruz CB, Rondinone AJ, Sorge KD |
| 3546 - 3556 |
Effect of hybridization of liquid rubber and nanosilica particles on the morphology, mechanical properties, and fracture toughness of epoxy composites
Xu SA, Wang GT, Mai YW |
| 3557 - 3565 |
Template-induced covalent assembly of hybrid particles for the facile fabrication of magnetic Fe3O4-polymer hybrid hollow microspheres
Fu JW, Wang MH, Zhang C, Wang XZ, Wang HF, Xu Q |
| 3566 - 3577 |
Drying-induced changes in the structure of alkali-activated pastes
Ismail I, Bernal SA, Provis JL, Hamdan S, van Deventer JSJ |
| 3578 - 3585 |
Nanocomposites of poly(epsilon-caprolactone) doped with titanium species
Machado AV, Amorim S, Botelho G, Neves IC, Fonseca AM |
| 3586 - 3596 |
Fabrication and characterization of iron and fluorine co-doped BST thin films for microwave applications
Stemme F, Bruns M, Gesswein H, Schroeder M, Sazegar M, Drahus MD, Eichel RA, Paul F, Azucena C, Binder JR |
| 3597 - 3604 |
Preparation of modified MWCNTs-doped PANI nanorods by oxygen plasma and their ammonia-sensing properties
Du HY, Wang J, Yao PJ, Hao YW, Li XG |
