| F83 - F89 |
Reactively sputtered iridium oxide - Influence of plasma excitation and substrate temperature on morphology, composition, and electrochemical characteristics
Wessling B, Besmehn A, Mokwa W, Schnakenberg U |
| F90 - F93 |
Observation of the electrochemical oxidation of Au(110) by reflection anisotropy spectroscopy
Smith CI, Almond NJ, Weightman P |
| P63 - P68 |
Phase transformations of metallorganic chemical vapor deposition processed alumina coatings investigated by in situ deflection
Huntz AM, Andrieux M, Vahlas C, Sovar MM, Samelor D, Gleizes AN |
| S11 - S11 |
In situ characterization of the catalyst layer in a polymer electrolyte membrane fuel cell (vol 154, pg B446, 2007)
Zhang FY, Spernjak D, Prasad AK, Advani SG |
| S12 - S12 |
On the existence of our metals-based civilization: I. Phase-space analysis (vol 153, pg B213, 2006)
Macdonald DD |
| A389 - A395 |
Factors influencing the quality of carbon coatings on LiFePO4
Wilcox JD, Doeff MM, Marcinek M, Kostecki R |
| A396 - A406 |
CO coverage/oxidation correlated with PtRu electrocatalyst particle morphology in 0.3 M methanol by in situ XAS
Scott FJ, Mukerjee S, Ramaker DE |
| A407 - A411 |
Photocatalytic oxidation of methanol using titanium dioxide/single-walled carbon nanotube composite
Dechakiatkrai C, Chen J, Lynam C, Phanichphant S, Wallace GG |
| A412 - A416 |
Layered cathode for improving safety of Li-ion batteries
Imachi N, Takano Y, Fujimoto H, Kida Y, Fujitani S |
| A417 - A420 |
Study of Mg2+-intercalated Nb2O5 thin films for electrochromic applications
Agarwal G, Reddy GB |
| A421 - A426 |
A two-dimensional model and numerical treatment for mixed conducting thin films
Mebane DS, Liu YJ, Liu ML |
| A427 - A432 |
Studies on storage characteristics of LiNi0.4Co0.2Mn0.4O2 as cathode materials in lithium-ion batteries
Li J, Zheng JM, Yang Y |
| A433 - A437 |
Structural evolution and electrochemical performance of sputter-deposited Cu6Sn5 thin-film anodes
Chiu KF, Lin KM, Lin HC, Chen WY, Shieh DT |
| A438 - A443 |
Lithium intercalation properties of reassembled titanate/carbon composites
Suzuki S, Miyayama M |
| A444 - A448 |
Isotropic volume expansion of particles of amorphous metallic alloys in composite negative electrodes for Li-ion batteries
Timmons A, Dahn JR |
| A449 - A454 |
CO2 gas evolution on cathode materials for lithium-ion batteries
Wuersig A, Scheifele W, Novak P |
| A455 - A461 |
Photovoltaic performance of plastic dye-sensitized electrodes prepared by low-temperature binder-free coating of mesoscopic titania
Miyasaka T, Ikegami M, Kijitori Y |
| A462 - A466 |
Synthesis and morphological, electrochemical characterization of Sn92Co8 nanoalloys for anode materials in Li secondary batteries
Kim H, Cho JP |
| A467 - A476 |
Physical and electrochemical properties of iodine-modified activated carbons
Barpanda P, Fanchini G, Amatucci GG |
| A477 - A480 |
Simulation of the Li-CFx system
Davis S, Takeuchi ES, Tiedemann W, Newman J |
| A481 - A494 |
Nonwovens as separators for alkaline batteries - An overview
Kritzer P, Cook JA |
| B439 - B445 |
The stability of LSF-YSZ electrodes prepared by infiltration
Wang WS, Gross MD, Vohs JM, Gorte RJ |
| B452 - B459 |
Electrode performance in reversible solid oxide fuel cells
Marina OA, Pederson LR, Williams MC, Coffey GW, Meinhardt KD, Nguyen CD, Thomsen EC |
| B460 - B465 |
Direct internal steam reforming at SOFC anodes composed of NiO-SDC composite particles
Kawano M, Matsui T, Kikuchi R, Yoshida H, Inagaki T, Eguchi K |
| B466 - B473 |
NMR characterization of composite polymer membranes for low-humidity PEM fuel cells
Nicotera I, Zhang T, Bocarsly A, Greenbaum S |
| B474 - B479 |
Influence of particle size on the properties of Pt-Ru/C catalysts prepared by a microemulsion method
Godoi DRM, Perez J, Villullas HM |
| B480 - B485 |
SOFCs with Sc-doped zirconia electrolyte and Co-containing perovskite cathodes
Jung HY, Hong KS, Jung HG, Kim H, Kim HR, Son JW, Kim J, Lee HW, Lee JH |
| B486 - B493 |
Guidelines for stable operation of a polymer electrolyte fuel cell with self-humidifying membrane electrolyte assembly
Chan SH, Han M, Jiang SP |
| B494 - B499 |
The stability of PEMFC electrodes - Platinum dissolution vs potential and temperature investigated by quartz crystal microbalance
Dam VAT, de Bruijn FA |
| C231 - C240 |
Metal dusting corrosion of nickel-based alloys
Chun CM, Bhargava G, Ramanarayanan TA |
| C241 - C248 |
XPS characterization of porous and sealed anodic films on aluminum alloys
Feliu S, Bartolome MJ, Gonzalez JA, Feliu S |
| C249 - C254 |
Atmospheric corrosion effects of HNO3 - A comparison of laboratory and field exposed copper, zinc, and carbon steel
Samie F, Tidblad J, Kucera V, Leygraf C |
| C255 - C260 |
Corrosion studies of Fe3Al-Fe3AlC intermetallics in 0.25 n H2SO4 using microelectrochemical method and SAES analysis
Rao VS, Kwon HS |
| C261 - C271 |
Investigation of corrosion and cathodic protection in reinforced concrete - II. Properties of steel surface layers
Koleva DA, de Wit JHW, van Breugel K, Lodhi ZF, Ye G |
| C272 - C278 |
Quantitative in situ analysis of initial atmospheric corrosion of copper induced by acetic acid
Gil H, Leygraf C |
| D277 - D282 |
Potential dependence of competitive adsorption of PEG, Cl-, and SPS/MPS on Cu - An in situ ellipsometric study
Walker ML, Richter LJ, Moffat TP |
| D283 - D291 |
Characterization of micrometer-sized thin films of electrocoated carbazole with p-tolylsulfonyl pyrrole on carbon fiber microelectrodes
Sarac AS, Ates M, Parlak EA, Turcu EF |
| G103 - G109 |
Comparison between e-beam and ultraviolet curing to perform porous a-SiOC : H
Jousseaume V, Zenasni A, Favennec L, Gerbaud G, Bardet M, Simon JP, Humbert A |
| G110 - G116 |
Effects of N-2-based annealing on the reliability characteristics of tungsten/La2O3/silicon capacitors
Molina J, Tachi K, Kakushima K, Ahmet P, Tsutsui K, Sugii N, Hattori T, Iwai H |
| G117 - G121 |
Electrical characteristics of liquid-phase-deposited titanium oxide films on (NH4)(2)S-x-treated InP substrate
Lee MK, Huang JJ, Yen CF |
| G122 - G126 |
Influence of RF bias on hydrogenated amorphous silicon by high-density plasma chemical vapor deposition
Hsiao WC, Liu CP, Wang YL |
| H331 - H335 |
Polymer/AlOx bilayer dielectrics for low-voltage organic thin-film transistors
Choi JM, Hwang DK, Jeong SH, Park JH, Kim E, Kim JH, Ima S |
| H336 - H339 |
Comparison of e-beam and sputter-deposited ITO films for 1.55 mu m metal-semiconductor-metal photodetector applications
Jang S, Kang BS, Ren F, Emanetoglu NW, Shen H, Chang WH, Gila BP, Hlad M, Pearton SJ |
| H340 - H350 |
Growth of anodic oxides on n-InP studied by electrochemical methods and surface analyses - Correlation between oxidation methods and oxide growth
Simon N, Quach NC, Goncalves AM, Etcheberry A |
| H351 - H353 |
Single-mode InGaAs photonic crystal vertical-cavity surface-emitting lasers emitting at 1170 nm
Wang TB, Hsu WC, Chen IL, Lee TD, Su KH, Yang HPD, Chiou CH |
| H354 - H360 |
Study of electric field modulation in organic field-effect transistors
Chen H, Rambhatla A, Janata J, Potje-Kamloth K |
| H361 - H364 |
Probing the ErSi1.7 phase formation by micro-Raman spectroscopy
Lee RTP, Tan KM, Liow TY, Ho CS, Tripathy S, Samudra GS, Chi DZ, Yeo YC |
| H365 - H369 |
The influence of ambient temperature on the forward-bias electrical characteristics of p-n heterojunction and homojunction interface
Tan SW |
| H370 - H373 |
Effects of mechanical stress on the growth behaviors of metal-induced lateral crystallization
Song NK, Kim MS, Han SH, Kim YS, Joo SK |
| H374 - H379 |
Comparative studies on double delta-doped Al0.3Ga0.7As/InxGa1-xAs/GaAs symmetrically graded doped-channel field-effect transistors
Lee CS, Chen CH, Huang JC, Su KH |
| H380 - H383 |
High-temperature and high-frequency operation of 1.3 mu m AlGaInAs/InP laser diodes using silicon oxide planarization
Peng TC, Yang CC, Huang YH, Wu MC |
| H384 - H388 |
Plasma-induced damage influence on the n-contact properties and device performance of ultraviolet InGaN/AlGaN light-emitting diodes
Kim SM, Yu YM, Baek JH, Jeon SR, Ahn HJ, Jang JS |
| H389 - H392 |
Comparative studies on low-resistance Pd-based ohmic contacts on p-GaAsSb
Jang JH, Cho HK, Bae JW, Adesida I, Pan N |
| H393 - H399 |
Copper dendrite growth on a microcircuit in oxalic acid
Gabrielli C, Beitone L, Mace C, Ostermann E, Perrot H |
| H400 - H405 |
Recovery processes of CMP-induced damages for copper/porous silica damascene interconnects
Ishikawa A, Shishida Y, Yamanishi T, Hata N, Nakayama T, Fujii N, Tanaka H, Matsuo H, Kikkawa T |
| H406 - H411 |
Performance of AlGaAs/InGaAs/GaAs pseudomorphic high electron mobility transistor as a function of temperature
Lin YS, Chen BY |
| H412 - H415 |
Investigation on the electrical properties of the Ba2Ti9O20 thin films for metal-insulator-metal capacitor application
Lim JB, Jeong YH, Hong KP, Nahm S, Sun HJ, Lee HJ |
| J141 - J149 |
Highly selective NO2 gas sensors made of MWCNTs and WO3 hybrid layers
Espinosa EH, Ionescu R, Llobet E, Felten A, Bittencourt C, Sotter E, Topalian Z, Heszler P, Granqvist CG, Pireaux JJ, Correig X |
| J150 - J154 |
pH-sensitive Gd2O3/SiO2 stacked capacitors prepared by pure water anodic oxidation
Chang LB, Ko HH, Jeng MJ, Lee YL, Lai CS |
| J155 - J158 |
Temperature effect on the optoelectronic properties of GaN-based light-emitting diodes with ITO p-contacts
Su SH, Hou CC, Yokoyama M, Shieh RS, Chen SM |
| J159 - J162 |
Effects of thermal annealing on performance of organic light-emitting diodes
Chen GT, Su SH, Hou CC, Yokoyama M |
| J163 - J166 |
Eu-doped CaAl2Si2O8 nanocrystalline phosphors crystallized from the CaO-Al2O3-SiO2 glass system
Ohgaki T, Higashida A, Soga K, Yasumori A |
| J167 - J171 |
Ce3+-> Eu2+ energy transfer studies on BaMgSiO4 - A green phosphor for three band white LEDs
Sivakumar V, Varadaraju UV |
| J172 - J176 |
Room-temperature hydrogen sensors based on an In3+-doped SnP2O7 proton conductor
Tomita A, Namekata Y, Nagao M, Hibino T |
