| 1 - 4 |
Electrochemical characteristics of silicon-doped tin oxide thin films for application of lithium secondary micro-battery anode
Park CH, Son YG, Ko TH |
| 5 - 8 |
Sol-gel derived TiO2 coating for chemical protection of stainless steel
Shin DY, Kim KN, Han SM |
| 9 - 12 |
Gas sensing characteristics of ZnO-doped SnO2 sensors for simulants of the chemical agents
Yun KH, Yun KY, Cha GY, Lee BH, Kim JC, Lee DD, Huh JS |
| 13 - 16 |
Effect of hydrogen peroxide on the photocatalytic decomposition of 4-nitrophenol over TiO2/Cr-Ti-MCM-41 catalysts in visible light
Lee GD, Do YJ, Park SS, Hong SS |
| 17 - 20 |
A rainwater harvesting technology by roof coating using TiO2
Kim RH, Lee S, Lee JH, Kim YM |
| 21 - 24 |
Structure and photoluminescence properties of ZnO : Al/porous silicon thin films
Park H, Prabakar K, Yoo YC, Hwang SK, Lee C |
| 25 - 28 |
Morphology and microstructure of graphitic nanofibers synthesized by the CVD method using nickel-copper as a catalyst
Cho KK, Lee BK, Ahn JP |
| 29 - 32 |
Sensitivity and thermal property of polyaniline sensor
Kim JS, Cho JH, Yu JB, Sohn SO, Huh JS |
| 33 - 36 |
Characteristic of titania photocatalyst fine particles added zirconia
Watanabe E, Takagi M, Fukaya M, Taoda H |
| 37 - 40 |
The preparation of rutile TiO2 nanopowders, phase transformation and their photocatalysed properties
Sun J, Gao L |
| 41 - 44 |
Decomposition of dioxins in gas and water using photocatalytic silica-gel
Taoda H |
| 45 - 48 |
Bond cleavage of nitrogen-bearing organics with "Molecular Scissors" of titania for aquatic remediation
Hidaka H, Miksutsuka Y, Calza P, Pelizzetti E |
| 49 - 52 |
Photocatalytic activities of plasma sprayed TiO2-based coatings
Chen H, Lee SW, Kim HS, Lee EA, Kim TH, Shin JH, Aum HS, Hur BY |
| 53 - 56 |
The preparation of rutile TiO2 doped with rare earth metal ions, sulfur and their photocatalytic properties
Gao L, Liu HY, Sun J |
| 57 - 60 |
Photocatalytic behavior of Na2ZrTi5O13 sol-gel.
Garza-Tovar LL, Torres-Martinez LM, Ramos-Garza JS, Castillo-Torres LG |
| 61 - 64 |
Semiconductor-mediated photocatalysed degradation of various pesticide derivatives and other priority organic pollutants in aqueous suspensions
Bahnemann D, Muneer M, Qamar M, Rahman MA, Singh HK |
| 65 - 68 |
Correlation of thickness with the photocatalytic characteristic of TiO2 thin films
Lee S, Jung HS, Kim DW, Hong KS |
| 69 - 72 |
Photocatalytic performance of plasma sprayed TiO2-ZnFe2O4 coatings
Liu JT, Zeng Y, Zhao XB, Ding CX |
| 73 - 76 |
Effect of H-2 on microstructure and property of nano-titania coatings
Zhao XB, Liu XY, Ding CX |
| 77 - 80 |
Preparation and antibacterial effect of doped tetra-needle like ZnO whiskers
Zhou ZW, Liu JJ, Chu LS |
| 81 - 84 |
Preparation and characterization of the visible light responsive TiO2 thin film photocatalysts prepared by magnetron sputtering method and their photocatalytic activities for the water splitting reactions
Matsuoka M, Kitano M, Takeuchi M, Anpo M, Thomas JM |
| 85 - 88 |
Sol-gel synthesis and photocatalitic properties of Bi2MNbO7 (M = Al, Fe, In y Sm).
Garza-Tovar LL, Torres-Martinez LM, Bernal-Rodriguez D, Trevino NN |
| 89 - 92 |
Influence of spraying power and distance on porosity and microhardness of plasma sprayed TiO2 coatings
Du H, Chen H, Moon BK, Shin JH |
| 93 - 96 |
Preparation of nano-sized TiO(2) photocatalysts by a multi-gelation method and their application to the degradation of 2-propanol diluted in water
Neppolian B, Yamashita H, Okada Y, Nishijima H, Anpo M |
| 97 - 100 |
High temperature oxidation behavior of Ti3SiC2 in air
Ko JH, Hwang SS, Park SW, Lee DB |
| 101 - 104 |
Fabrication of zirconia-hydroxyapatite composites for biological materials
Moon BK, Choi DH, Sung RJ, Kim SH, Niihara K |
| 105 - 108 |
Thermal and leaching behaviors of EAF dust-clay systems
Kim JH, Lee KG, Kim YT, Kang SK |
| 109 - 112 |
Increased high temperature oxidation resistance of Ni20Cr20Fe5Nb1Y(2)O(3)alloy with nano-sized grains
Kim IH, Kwun SI |
| 113 - 116 |
Changes in mechanical properties of the wide-gap region brazed with various brazing temperatures and times
Kim YH, Kwun SI |
| 117 - 120 |
Preparation of porous hydroxyapatite/TCP composite block using a hydrothermal hot pressing method
Kim Y, Kim SR, Song H, Yoon H |
| 121 - 124 |
Life cycle improvement assessment of Al and Mg diecasting processes
Kim SK, Kim YJ |
| 125 - 128 |
Effects of the duration of potentiostatic anodizing on the corrosion resistance and surface morphology of films formed on Mg-Al alloys
Kim SJ, Jang SK, Kim JI |
| 129 - 132 |
Surface morphology characteristics and improvements on corrosion resistance in anodized Mg-Al alloys as a result of sealing treatments
Kim SJ, Kim JI, Okido M |
| 133 - 136 |
Effects of post-weld heat treatment on optimum cathodic protection potential of high-strength steel in marine environment conditions
Kim SJ, Jang SK, Kim JI |
| 137 - 140 |
Sliding wear behavior of steam generator tube materials in nuclear power plants
Kim GG, Kim JH, Lee KY, Kim SJ, Lee DH, Hur DH, Choi MS, Han JH |
| 141 - 144 |
Characterization of long-term oxidized nickel aluminide coating by photoluminescence spectroscopy
Byeon JW, Mu N, Liu J, Sohn YH |
| 145 - 148 |
Characterization of isothermally oxidized ZrO2-8wt.%Y2O3 thermal barrier coatings by electrochemical impedance spectroscopy
Byeon JW, Jayaraj B, Sohn YH |
| 149 - 152 |
Transmission electron microscopy of isothermally oxidized EB-PVD thermal barrier coating on (Ni,Pt)Al bondcoat
Byeon JW, Laxman S, Sohn YH |
| 153 - 156 |
Surface characteristics of Ni-diamond composite powders by electroless plating method
Ahn JG, Kim DJ, Hai HT, Lee J, Chung HS, Kim CO |
| 157 - 160 |
Self-lubricating composite coating on air foil bearing shaft by Hollow Cathode Plasma Jet
Yang MK, Yang HS, Park JK, Ryu K, Lee YB, Lee JK |
| 161 - 164 |
Surface coating of reactive layer with inner nano-pores on lantanium gallium based oxide
Lee KS, Shin TH, Lee S, Woo SK, Yang JK, Choa YH |
| 165 - 168 |
Oxidation of SiOC composite having dispersoids of Mo4.8Si3C0.6 and MoSi2
Lee DB, Woo SW |
| 169 - 172 |
Corrosion of Ni-W coatings in SO2 atmosphere between 500 and 700 degrees C
Lee DB, Kob JH |
| 173 - 176 |
Fluxless brazing of Al6061 alloys using Ag-28Cu insert
Lee YS, Lee CH, Lim CH, Cho DC, Shin SY, Lee CH |
| 177 - 180 |
Phosphate recovery from water as hydroxyapatite with activated oystershell
Lee CW, Kwon HB, Jeon HP, Koopman B |
| 181 - 184 |
Mechanical and thermal properties of silicon nitride hot pressed with adding rare-earth oxides.
Choi DH, Moon BK, Sung RJ, Kim SH, Niihara K |
| 185 - 188 |
Stress concentration regions in ceramic ball heads for total hip replacement considering trauma-like loading
Aum HS, Curiel MC, Carrillo DG |
| 189 - 192 |
Biodegradable porous nano-hydroxyapatite/alginate scaffold
Xu FL, Li YB, Han JM, Lv GY |
| 193 - 196 |
Effect of plasma spraying gas on microstructure and properties of 95vol.%Al(2)O(3-5)vol.%SiC nanocomposite coatings
Tram PH, Min JW, Chen H, Lee SW |
| 197 - 200 |
Mechanical properties of Al2O3-TiO2-SiC nanocomposites for the femoral head of hip joint replacement
Visbal S, Lira-Olivares J, Sekino T, Niihara K, Moon BK, Lee SW |
| 201 - 204 |
Plasma-sprayed wollastonite coatings for biomedical application
Xue WC, Liu XY, Zheng XB, Ding CX |
| 205 - 208 |
Study of corrosion resistance of anodized Ti6Al4V in SBF
Zhao Y, Xiong TY, Jin HZ, Wang LB, Li TF |
| 209 - 212 |
Mechanical and wear properties of silicon nitride added with AlN
Sung RJ, Kim SH, Kusunose T, Nakayama T, Sekinoe T, Niihara K |
| 213 - 216 |
Tribological behaviors of Al2O3/SiC nanocomposites during dry sliding
Kim SH, Sekino T, Niihara K |
| 217 - 220 |
Contact fracture behaviors of Ti3SiC2 synthesized by hot pressing using TiCx and Si powder mixture
Hwang SS, Park SW, Cho SJ, Lee DB |
| 221 - 224 |
Sintering effects of ZnO nanopowders synthesized by solution-combustion method
Park S, Lee JC, Seo JU, Lee JH |
| 225 - 228 |
In-vitro Hertzian fatigue properties of glass infiltrated ceramic composites for dental crowns
Song YS, Park I, Jang JW, Lee DY, Lee SJ |
| 229 - 232 |
Probabilistic assessment for failure probability of pipe lines by extreme value distribution
Lee SH, Choe BH, Kim YP, Kim WS, Ko YT, Lee JH, Paik U |
| 233 - 236 |
Analysis of pipe flow during transportation of magnesium alloy melt
Lee HG, Kim DJ, Han JW, You BD, Byun JY |
| 237 - 240 |
Effect of sintering atmospheres on the microstructure evolution of alumina/alumia : SiC whisker laminate composites
Park SY, Bang HG |
| 241 - 244 |
Embrittlement fracture in a 17-4 PH stainless steel after aging at 400 degrees C.
You WD, Lee JH, Shin SK, Choe BH, Paik U, Lee JH |
| 245 - 248 |
Hardness and wear resistance of reaction bonded SiC-B4C composite
Lee KS, Han IS, Chung YH, Woo SK, Lee SW |
| 249 - 252 |
Friction stir welding of dissimilar formed Mg alloys (AZ31/AZ91)
Lee CY, Lee WB, Yeon YM, Jung SB |
| 253 - 256 |
Fabrication and thermoelectric properties of N-type Bi2Te3 based compounds by spark plasma sintering
Lee DM, Lim CH, Cho DC, Shin SY, Cho WS |
| 257 - 260 |
Equilibrium and metastable eutectics near the Ni3Al composition
Lu Y, Lee JS, Lee JH, Wee DM, Oh MH |
| 261 - 264 |
Effect of skin pass mill elongation on characteristics of surface friction and formability
Hur BY, Cho SH, Um YS, Kim SY |
| 265 - 268 |
The combustion characteristics of refuse derived fuels using coke/waste tire
Park MH, Shin DY |
| 269 - 272 |
Optimum shear height for evaluation of Pb-free solder ball shear strength
Kim JW, Park SK, Jung SB |
| 273 - 276 |
Growth kinetics of intermetallic compound and interfacial reactions in Pb-free flip chip solder bump during solid state isothermal aging
Kim DG, Jang HS, Kim YJ, Jung SB |
| 277 - 280 |
An approach to legal and technical norms to manage hazardous materials and wastes in Latin America
Gruber N, Gerdler S, Rodriguez J, Lira-Olivares J |
| 281 - 284 |
Low temperature synthesis of zeolite using ultrasonic energy
Lee SG, Kim JK, Kwon JY, Lee CH, Park HC, Son SM, Park SS |
| 285 - 288 |
Ferroelectric properties of lead-free (Bi,La)(4)Ti3O12 thin film deposited on MTP cell structure for high density FeRAM device
Cho KW, Kim NK, Oh SH, Choi ES, Sun HJ, Yeom SJ, Lee KN, Lee SS, Hong SK, Choi SK, Hong TW, Kim IH, Lee JI, Ur SC, Lee YG, Ryu SL, Kweon SY |
| 289 - 292 |
Interfacial reaction and shear strength of Pb-free Sn-3.5Ag/Ni BGA solder joints during reflow
Yoon JW, Kim SW, Jung SB |
| 293 - 296 |
Fabrication of calcium based fine ceramic materials by recycling eggshell
Lee SJ, Chun SY |
| 297 - 300 |
Nitride-related compounds preparation from waste aluminum dross by self-propagating high-temperature process
Lee J, Lee I, Shin H, Ahn J, Kim D, Chung H |
| 301 - 304 |
Dual ion beam sputtering for chromium nitride as an alternative to electroplated hexavalent chromium
Shin K, Lim J, Lee C |
| 305 - 308 |
The effect of pozzolanics on the recycled aggregates by surface treatment
Kim JJ, Youn SH, Cho MJ, Shin HT, Yoon JB, Hwang KH, Lee DS |
| 309 - 312 |
Effect of RO components on some properties of Pb free glass frit for PDP
Hwang JH, Lim TY, Kim CY, Han SM, Park JS, Masaki T |
| 313 - 316 |
Application of a cold ECAP to magnesium alloy (AZ31) by a combination of extrusion process
Song JW, Lim HT, Han JW, Kim MS, Hwang SK |
| 317 - 320 |
Effect of particle size on the extraction of metallic components from oxidized PCB in high frequency induction furnace
Lee JC, Jeong JK, Kwon EH, Jang SH, Han JW |
| 321 - 324 |
Optical properties of Bi2O3-ZnO-SiO2 glass system for eco transparent dielectric in PDP
Jeon JS, Cha MR, Kim HS |
| 325 - 328 |
Comparison of transmittance of Pb-free transparent dielectric made by screen printer and die coater
Cha ML, Jeon JS, Kim HS |
| 329 - 332 |
Alumina/aluminum composite fabricated by freeze and dry process with water-soluble polymer slurry
Nakata M, Suganuma K |
| 333 - 337 |
Fabrication of tubular mullite-alumina porous ceramics by polymer-aided extrusion
Hua YA, Ke Y, Ding WR |
| 338 - 341 |
Microstructural evolution of electromagnetically stirred Al alloy during isothermal reheating in solid-liquid region
Lee DY, Kim KB, Kim DH |
| 342 - 345 |
Effect of ternary alloying elements on microstructure and mechanical property of Nb-Si based refractory intermetallic alloy
Kim WY, Kim HS, Kim SK, Ra TY, Kim MS |
| 346 - 349 |
Influences of fiber orientation on the progressive damage in glass reinforced hybrid composite
Kim CW, Song SH, Oh DJ |
| 350 - 353 |
Characteristic of the residual strength rate by variation of impact velocities for the leaf spring in ankle foot orthosis
Kim CW, Oh DJ |
| 354 - 357 |
The effect of defect locations on the stress distribution and crack initiation in monolithic aluminum vs. GLARE hybrid composite
Kim CW, Song SH, Oh DJ |
| 358 - 361 |
Vibration and impact noise damping properties of wood/polymer composites
Lee HJ, Lee BG, Shin DY |
| 362 - 365 |
Processing and microstructural characteristics of Bi-materials composed of Al and its composite
Chang SY, Lee KS, Kang KM |
| 366 - 369 |
Mechanical and electrical properties of Y-TZP containing TiNi-base intermetallic compounds
Tanaka N, Sekino T, Nakayama T, Hayashi Y, Kosunose T, Niihara K |
| 370 - 373 |
Electrical and thermal properties of carbon-coated porous ceramic fiber composites
Yu JS, Park S, Lee JC, Hahn IS, Woo SK |
| 374 - 377 |
The solidification microstructure and carbide formation behaviors in the cobalt-based superalloy ECY768
Lee JS, Lee JH, Choi BG, Jo CY, Paik U, Gang SG |
| 378 - 381 |
Synthesis of SiC ceramics from coal gangue
Jia SH |
| 382 - 386 |
Heavy metal leaching behavior of glasses containing EAF dust
Eun HT, Kang SG, Kim YT, Lee GK, Kim JH |
| 387 - 390 |
Nutrients recovery by struvite formation from wastewater in a fluidized bed reactor
Lee CW, Kwon HB, Kim YJ, Jeon HP |
| 391 - 394 |
The effect of sodium tripolyphosphate on sodium silicate cement grout
Lim HM, Yang HC, Chun BS, Lee SH |
| 395 - 398 |
Fabrication and properties of wall and floor tiles using waste glass
Kim YK, Joung YG, Song JB, Shin MC, Lee HS |
| 399 - 402 |
Utilization of waste plastics as a fuel in the fluidized bed calciner for cement kiln process
Kwon WT, Bae SY |
| 403 - 406 |
Synthesis and characterization of clay brick using coal wastes
Yoo JW, Jung JH, Kim HT |
| 407 - 410 |
Preparation of K2O-CaO-P2O5 eco-glass fertilizers and effect in crops
Lee H, Hwang S, Kang W |
| 411 - 414 |
Effect of warm rolling on microstructure and high temperature mechanical behavior of a nano-structured Al-8Fe-2Mo-2V-1Zr alloy
Kim WY, Park JS, Kim MS |
| 415 - 419 |
Effects of Si content and cold rolling condition on brazeability of Al-Mn-Zn alloy core brazing sheet
Noh SJ, Kim MS, Jung D, Han JW, You BD |
| 420 - 423 |
Effect of Ti addition on the fracture toughness of Al-Ti-B alloys synthesized by high-energy ball milling and spark plasma sintering
Kim JH, Lee KY, Kim GG, Kim SJ |
| 424 - 427 |
Die-casting capabilities of heat resistant Mg-Al-Ca alloys
Kim JM, Park BK, Jun JH, Kim KT, Jung WJ |
| 428 - 431 |
Formation of AlN in the N added 18Cr ferritic stainless steels
Kim HC, Lee JH, Heon YG, Jo CY, Kim JW, Kim SG |
| 432 - 435 |
Petroleum separation through polymer blend membranes using pervaporation
Huh H, Rhim JW, Park JS, Nam SY |
| 436 - 439 |
Synthesis and characterization of nanosized ZnxMn1-xFe2O4 powders by glycothermal process
Bae DS, Kim EJ, Park SW, Han KS |
| 440 - 443 |
Synthesis and characterization of nanosized ITO powders by glycothermal processing
Bae DS, Kim HK, Kim RH, Kim JW, Lee JH, Park SW, Han KS |
| 444 - 447 |
Preliminary studies to develop environmentally compatible hydraulic components
Lee SY, Kim SD, Kim GS, Hong YS |
| 448 - 451 |
Cellular solidification behavior of Fe-18Cr ferritic stainless steels
Kim HC, Lee JH, Kim JW, Kim SK, Liu S, Trivedi R |
| 452 - 455 |
Substrate bias effects on the structure of the film by a hybrid PVD and plasma-based ion implantation process
Chun SY, Lee SJ |
| 456 - 459 |
Development of strip casting process for electrolytic tough pitch copper
Kim SK, Cho H, Lee JK, Kim WY, Jo HH |
| 460 - 463 |
Effect of boron on solidification microstructure in a single crystal superalloy
Jo CY, Kim DH, Yoo YS, Ye DH, Lee JH |
| 464 - 467 |
Rheology characteristics of Al-Si alloy and Mg alloy for metal foam manufacturing
Park SH, Hur BY |
| 468 - 471 |
Sound absorption properties of Al foam
Kim SY, Park SH, Um YS, Hur BY |
| 472 - 475 |
Compressive properties of open cell aluminum foams
Hur BY, Park BK, Kim SY, Bae H |
| 476 - 480 |
Synthesis of cordierite using high energy ball milling
Kim SJ, Bang HG, Park SY |
| 481 - 484 |
Brazing Al2O3 to Kovar alloy with Ni/Ti/Ni interlayer and dramatic increasing of joint strength after thermal cycles
Qiao GJ, Wang HJ, Gao JQ, Jin ZH |
| 485 - 488 |
Effect of operating temperature on characteristics of single-walled carbon nanotubes gas sensor
Quang NH, Van Trinh M, Huh JS |
| 489 - 492 |
Micromechanical mean-field analysis for stress-strain curve of lotus-type porous iron
Tane M, Hyun SK, Ichitsubo T, Nakajima H |
| 493 - 496 |
Preparation and properties of carbon nanofiber/polyimide composite films
Yamamoto A, Sano H, Zheng GB, Uchiyama Y |
| 497 - 500 |
Thermal stability and mechanical properties of hydrogenated Zr-Ni-Nb-Co amorphous alloy
Jayalakshmi S, Fleury E, Kim YC, Kim KB |
| 501 - 505 |
Fabrication of silicon nitride ceramics with electrical conductivity
Kim YH, Sekino T, Kawaoka H, Kusunose T, Nakayama T, Niihara K |
| 506 - 509 |
Microwave dielectric properties of LTCC materials consisting of BaO-TiO2-SiO2-Al2O3 glass - BaNd2Ti5O14 ceramic composites
Kim YJ, Hwang SJ, Kim HS |
| 510 - 513 |
Removal of Cu++ ions from aqueous Cu-EDTA solution using ZnO nanopowder
Lee JH, Kim BS, Lee JC, Park S |
| 514 - 517 |
Reactive sputter deposition of WCx films for replacing hexavalent chromium
Park Y, Kang S, Kim D, Lee C |
| 518 - 521 |
Characterization of iron and its nitride nanoparticles prepared by CVC process without using a chiller
Lee DW, Jang TS, Lee DH, Kim BK |
| 522 - 525 |
Synthesis of heterogeneous beta-SiC nano-particles and nano-whisker from TEOS/SiO2 bead/PMMA ternary xerogel
Kim JW, Lee SS, Hur SK, Jung YG, Jo CY |
| 526 - 529 |
Effect of oxidizing agent of polypyrrole layer prepared by vapor polymerization
Cho JH, Kim JS, Yu JB, Sohn SO, Huh JS |
| 530 - 533 |
Various applications of silver nano-particles by ultrasonic eco-fabrication
Hayashi Y, Takizawa H, Saijo Y, Sekino T, Suganuma K, Niihara K |
| 534 - 537 |
Influence of heat-treatment on the mechanical properties of lotus-type porous carbon steel fabricated by continuous zone melting method
Kujime T, Hyun SK, Nakajima H |
| 538 - 541 |
Effect of oxide additives on the aspect ratio control of mullite whiskers
Park SY, Kim SW, Bang HG |
| 542 - 545 |
Synthesis of calcium carbonate from calcium chlorine solution using homogeneous precipitation method
Kim KN, Shin DY, Son SG, Kim YD |
| 546 - 549 |
Synthesis of calcium carbonate particles modified by coating with nickel precursor
Kim KN, Kim YD |
| 550 - 553 |
Influence of the electromagnetic stirring on globularization of primary solid phase in solid-liquid region
Lee DY, Kim K, Kim DH |
| 554 - 557 |
Thermoelectric properties of Co1-xNbxSb3 prepared by induction melting
Park JB, You SW, Cho KW, Lee JI, Ur SC, Kim IH |
| 558 - 561 |
Electrochemical characteristics of Si/Mo multilayer anode for microbattery in MEMS
Jung JY, Kim MH, Moon HS, Park JW |
| 562 - 565 |
Characteristics of SnOx-coated lithium manganese oxide thin film for MEMS power system
Lee JH, Kim YJ, Moon HS, Park JW |
| 566 - 569 |
Characteristics of polymer composite electrolyte for MEMS power system
Kim JN, Park JW |
| 570 - 573 |
Effect of PVP addition on microstructure of SrZrO3 thin films on Bi(2223) tapes
Song YS, Lee DY, Lee SJ, Kim BY, Hong SN |
| 574 - 577 |
Effect of solvent extraction on removal of heavy metal ions using lignocellulosic fiber
Lee BG, Lee HJ, Shin DY |
| 578 - 581 |
Sound absorbing properties of foamed glasses
Cho H, Choi C, Kim J, Choi D, Lee SW |
| 582 - 585 |
Hydriding/dehydriding behavior of Mg-Ni systems
Hong TW, Kim IH, Ur SC, Lee YG, Kim YJ |
| 586 - 589 |
Hydrogenation properties of Mg-TiNi hydrogen storage composites materials
Hong TW |
| 590 - 593 |
Electrical and electrochemical properties of poly(p-phenylene)-based carbon for lithium rechargeable batteries
Kim JS, Kim JU, Kong MZ, Gu HB |
| 594 - 597 |
Electrochemical Characteristics of Li/S secondary battery with (PEO)(6)LiBF4-Al2O3 composite polymer electrolyte prepared by ball milling
Jeong SS, Lim YT, Jung BS, Kim KW |
| 598 - 601 |
Effects of MWNT and GNF on the performance of Sulfur electrode for Li/S battery
Kim JH, Choi YJ, Jeong SS, Cho KK, Kim KW |
| 602 - 605 |
Thermoelectric properties of Co1-xNbxSb3 prepared by induction melting
Park JB, You SW, Cho KW, Lee JI, Ur SC, Kim IH |
| 606 - 609 |
Charge/discharge characteristics of SnO2 electrodes for lithium polymer batteries
Kim JU, Kim JK, Choi JW, Kim YH, Ahn JH, Kim GT, Jun DK, Gu HB |
| 610 - 613 |
Effect of organic additives in electrolytes for rechargeable lithium/sulfur battery
Kim JK, Choi JW, Kim YH, Kim JU, Ahn JH |
| 614 - 617 |
Synthesis and electrochemical study of Zr-doped LiNixMnyCo(1-x-y)O2 as cathode material for secondary Li-ion battery
Na SH, Kim HO, Moon CI |
| 618 - 621 |
Transformation behavior and mechanical properties of an equiatomic Ti-Ni alloy with surface sulfide layers
Nam TH, Park SM, Cho GB |
| 622 - 625 |
Thermal sulficlation behavior of Ti-Ni alloys
Nam TH, Park SM, Cho KK |
| 626 - 629 |
Microstructure and electrical properties of RF magnetron sputtering derived PZT thin films deposited on PbO buffer layer
Park CH, Son YG |
| 630 - 633 |
Self-discharge behavior of lithium/sulfur battery using aluminum current collector
Ryu HS, Ahn HJ |
| 634 - 637 |
Discharge-charge property of lithium/PEO/sulfur battery with high sulfur content
Rhy HS, Park CW, Shin WC, Kim TB, Lee JY, Ahn HJ |
| 638 - 641 |
Ionic conductivity of sodium ion with NaCF3SO3 salts in electrolyte for sodium batteries
Kim TB, Park CW, Ryu HS, Ahn HJ |
| 642 - 645 |
Mechanical alloying and thermoelectric properties of CoSb3 skutterudite
Choi MK, Ur SC, Kwon JC, Cho KW, Kim IH, Lee YG, Ryu SL |
| 646 - 649 |
Orientation distribution in Bi2Te3-based compound prepared by spark plasma sintering
Kim KT, Lim CH, Kim YH, Cho DC, Lee YS, Lee CH |
| 650 - 653 |
Application of a Ti-Ni alloy as a current collector of positive electrode for lithium/sulfur batteries
Cho GB, Jeong SS, Park SM, Nam TH |
| 654 - 657 |
Synthesis and thermoelectric properties of n-type Bi2Te2.7Se0.3 compounds by spark plasma sintering
Cho DC, Lim CH, Kim KT, Shin SY, Lee DM, Lee YS, Lee CH |
| 658 - 661 |
Electrochemical properties of primary Li/FeS2 batteries
Choi JW, Kim JK, Kim YH, Kim JU, Ahn JH |
| 662 - 665 |
Synthesis of Ni-YSZ cermet for an electrode of high temperature electolysis by high energy ball milling
Hong HS, Chae US, Park KM, Choo ST |
| 666 - 669 |
Emissive carbon coating for energy saving
Yu JS, Sung JH, Park S, Lee JC |
