| 1725 - 1735 |
The effect of Kevlar fiber reinforcement on the curing, thermal, and dynamic-mechanical properties of an epoxy/anhydride system
Anton JJS, Pradas MM, Ribelles JLG |
| 1736 - 1746 |
Coupled thermo-mechanical analysis for plastic thermoforming
Song YH, Zang KF, Wang ZR, Diao FX, Yan YN, Zhang RJ |
| 1747 - 1757 |
Multilayer method as a tool for depth dependent polymer film photodegradation studies
Nepotchatykh OV, Power JF |
| 1758 - 1764 |
Rotational molding of plastics: Comparison of simulation and experimental results for an axisymmetric mold
Olson LG, Crawford R, Kearns M, Geiger N |
| 1765 - 1776 |
Measurement of cohesive zone parameters in tough polyethylene
Pandya KC, Williams JG |
| 1777 - 1782 |
Transesterification reactions in triphenyl phosphite additivated-poly(ethylene terephthalate)/poly(ethylene naphthalate) blends
Dias ML, Silva APF |
| 1783 - 1795 |
Healing of stress-whitening in polyethylene and polypropylene at or below room temperature
Pae KD, Chu HC, Lee JK, Kim JH |
| 1796 - 1808 |
Morphological modeling of polymer solidification
Huang T, Kamal MR |
| 1809 - 1815 |
Strain rate dependence of the work of fracture response of an amorphous poly(ethylene-naphthalate) (PEN) film
Karger-Kocsis J, Czigany A |
| 1816 - 1824 |
Time-resolved light scattering and FTIR spectroscopic studies on blends of polypropylene grafted with maleic anhydride and zinc salt of sulfonated EPDM ionomer
Ha CS, Cho YW, Cho WJ, Kim Y, Inoue T |
| 1825 - 1832 |
An investigation of the friction and wear behaviors of polyphenylene sulfide filled with solid lubricants
Yu LG, Yang SR, Liu WM, Xue QJ |
| 1833 - 1842 |
Theoretical analysis of the devolatilizing performance of an intermeshing co-rotating twin-screw extruder with a type of square-channel flighted element
Wang NH |
| 1843 - 1849 |
On-line NIR sensing of CO2 concentration for polymer extrusion foaming processes
Nagata T, Tanigaki M, Ohshima M |
| 1850 - 1861 |
Effect of supercritical carbon dioxide on morphology development during polymer blending
Elkovitch MD, Lee LJ, Tomasko DL |
| 1862 - 1869 |
Melt tearing and ovality in wire coating
Hade AJ, Giacomin AJ |
| 1870 - 1877 |
Nonisothermal two-dimensional film casting of a viscous polymer
Smith S, Stolle D |
| 1878 - 1893 |
Overall numerical simulation of extrusion blow molding process
Tanifuji SI, Kikuchi T, Takimoto JI, Koyama K |
| 1894 - 1905 |
Novel variations in the microstructure of the auxetic microporous ultra-high molecular weight polyethylene. Part 1: Processing and microstructure
Webber RS, Alderson KL, Evans KE |
| 1906 - 1914 |
Novel variations in the microstructure of auxetic ultra-high molecular weight polyethylene. Part 2: Mechanical properties
Alderson KL, Webber RS, Evans KE |
| 1915 - 1920 |
Polymerization of anilinium/DBSA in the presence of clay particles: Catalysis and encapsulation
Segal E, Aviel O, Narkis M |
| 1921 - 1930 |
Dispersed phase morphology of impact PP copolymers. Effects of blend composition as determined by TREF
Zacur R, Goizueta G, Capiati N |
| 1931 - 1941 |
Friction welding of similar and dissimilar materials: PMMA and PVC
Lin CB, Wu LC |
| 1942 - 1952 |
Recycling of poly(ethylene terephthalate) into closed-cell foams
Japon S, Leterrier Y, Manson JAE |
