| 1350 - 1365 |
Stress rupture in ceramic-matrix composites: Theory and experiment
Halverson HG, Curtin WA |
| 1366 - 1368 |
Structure determination in colloidal crystal photonic bandgap structures
Ballato J, DiMaio J, Taylor TD, Gulliver E, Han DG, Riman RE, Carroll DL |
| 1369 - 1371 |
Fabrication of ceramic-polymer photonic crystals by stereolithography and their microwave properties
Kirihara S, Miyamoto Y, Kajiyama K |
| 1372 - 1376 |
Processing and characterization of bulk chalcogenide glasses used for waveguide applications
Lopez C, Richardson KA, de Castro M, Seal S, Verma DK, Shulte A, Rivero C, Villeneuve A, Gastian TV, Turcotte K, Saliminia A, Laniel J |
| 1377 - 1382 |
Spectroscopic study of neodymium(III) in sodium tellurite glass
Li H, Sundaram SK, Blanc-Pattison PA, Li LY |
| 1383 - 1386 |
Visible frequency thin film photonic crystals from colloidal systems of nanocrystalline titania and polystyrene microspheres
Subramania G, Constant K, Biswas R, Sigalas MM, Ho KM |
| 1387 - 1390 |
New materials and processes for integrated optics
Wilkinson JS |
| 1391 - 1395 |
Tellurite glasses for broadband amplifiers and integrated optics
Shen SX, Jha A, Liu XB, Naftaly M, Bindra K, Bookey HJ, Kar AK |
| 1396 - 1402 |
Vibrational spectra of water- and ammonium-chloride-related residues and upconversion fluorescence of Er3+ in ZnCl2-based glasses
Wada N, Tsuneoka T, Kojima K |
| 1403 - 1408 |
Aqueous degradation and chemical passivation of yttria-tetragonally-stabilized zirconia at 25 degrees C
Kimel RA, Adair JH |
| 1409 - 1413 |
Phase-pure mullite from kaolinite
Yamuna A, Devanarayanan S, Lalithambika M |
| 1414 - 1420 |
Preparation of strontium- and zinc-doped LaGaO3 powders via precipitation in the presence of urea and/or enzyme urease
Tas AC, Majewski PJ, Aldinger F |
| 1421 - 1429 |
Synthesis of gallium oxide hydroxide crystals in aqueous solutions with or without urea and their calcination behavior
Tas AC, Majewski PJ, Aldinger F |
| 1430 - 1434 |
Fabrication and characterization of cordierite/zircon composites by reaction sintering: Formation mechanism of zircon
Sun EH, Kusunose T, Sekino T, Niihara K |
| 1435 - 1440 |
Development of a self-forming ytterbium silicate skin on silicon nitride by controlled oxidation
Lee SK, Readey MJ |
| 1441 - 1448 |
Interactions of organic additives with boric oxide in aqueous barium titanate suspensions
Li CC, Jean JH |
| 1449 - 1455 |
Interaction between dissolved Ba2+ and PAA-NH4 dispersant in aqueous barium titanate suspensions
Li CC, Jean JH |
| 1456 - 1460 |
Compact formation during colloidal isopressing
Yu BC, Biesheuvel PM, Lange FF |
| 1461 - 1466 |
Effect of potassium concentration on the grain orientation in bismuth sodium potassium titanate
Fukuchi E, Kimura T, Tani T, Takeuch T, Saito Y |
| 1467 - 1472 |
Variations in a boehmite gel and oleic acid emulsion under calcination
Lin CP, Wen SB |
| 1473 - 1476 |
Fabrication of highly porous yttria-stabilized zirconia by acid leaching nickel from a nickel-yttria-stabilized zirconia cermet
Kim H, da Rosa C, Boaro M, Vohs JM, Gorte RJ |
| 1477 - 1484 |
Chemical vapor infiltration rates of ZrO2 into MoSi2 porous bodies and comparison with model calculation
Yoshikawa N, Evans JW |
| 1485 - 1491 |
Modeling of chemical vapor infiltration rate considering a pore size distribution
Yoshikawa N, Evans JW |
| 1492 - 1498 |
Defect and mixed conductivity in nanocrystalline doped cerium oxide
Suzuki T, Kosacki I, Anderson HU |
| 1499 - 1504 |
Hydroxylation and dehydroxylation behavior of silica glass fracture surfaces
D'Souza AS, Pantano CG |
| 1505 - 1511 |
Weight function analysis on the R-curve behavior of multilayered alumina-zirconia composites
Moon RJ, Hoffman M, Hilden J, Bowman K, Trumble K |
| 1512 - 1516 |
Microstructure and mechanical properties of silicon nitride ceramics with controlled porosity
Yang JF, Ohji T, Kanzaki S, Diaz A, Hampshire S |
| 1517 - 1521 |
Permeability of high-alumina refractory castables based on various hydraulic binders
Innocentini MDM, Pardo ARF, Pandolfelli VC, Menegazzo BA, Bittencourt LRM, Rettore RP |
| 1522 - 1528 |
Elastoplastic indentation on heat-treated carbons
Sakai M, Nakano Y, Shimizu S |
| 1529 - 1536 |
Chemical durability of silicon oxycarbide glasses
Soraru GD, Modena S, Guadagnino E, Colombo P, Egan J, Pantano C |
| 1537 - 1544 |
Measuring permeability of rigid materials by a beam-bending method: III, cement paste
Vichit-Vadakan W, Scherer GW |
| 1545 - 1552 |
Hardness, toughness, and scratchability of germanium-selenium chalcogenide glasses
Guin JP, Rouxel T, Sangleboeuf JC, Melscoet I, Lucas J |
| 1553 - 1560 |
Failure of crossply ceramic-matrix composites
O'Day MP, Curtin WA |
| 1561 - 1568 |
Morphological evolution and weak interface development within chemical-vapor-deposited zirconia coating deposited on Hi-Nicalon (TM) fiber
Li H, Lee J, Libera MR, Lee WY, Kebbede A, Lance MJ, Wang HY, Morscher GN |
| 1569 - 1575 |
Incorporation of Er3+ into BaTiO3
Buscaglia MT, Viviani M, Buscaglia V, Bottino C, Nanni P |
| 1576 - 1580 |
Structural analysis of a new layered compound: La0.05Sr0.95MnO3
Nakano H, Mori T, Horikubi T, Kamegashira N |
| 1581 - 1584 |
Grain growth and twin formation in 0.74PMN-0.26PT
Wallace JS, Huh JM, Blendell JE, Handwerker CA |
| 1585 - 1593 |
Abnormal grain growth in alumina with anorthite liquid and the effect of MgO addition
Park CW, Yoon DY |
| 1594 - 1600 |
Ab initio calculations of pristine and doped zirconia Sigma 5 (310)/[001] tilt grain boundaries
Mao ZG, Sinnott SB, Dickey EC |
| 1601 - 1606 |
Iron as an oxygen tracer at the aluminum-alumina interface
Levi G, Kaplan WD |
| 1607 - 1609 |
Strength retention in hot-pressed Si3N4 ceramics with Lu2O3 additives after oxidation exposure in air at 1500 degrees C
Guo SQ, Hirosaki N, Yamamoto Y, Nishimura T, Mitomo M |
| 1610 - 1612 |
Methods of purification of zirconium tetrafluoride for fluorozirconate glass
MacFarlane DR, Newman PJ, Voelkel A |
| 1613 - 1615 |
Sodium-accelerated diffusion of magnesium in silica and its retardation by aluminum
Mukundhan P, Du HH, Withrow SP |
| 1616 - 1618 |
High-temperature hydroxylation of mullite
Ruscher CH, Shimada S, Schneider H |
| 1619 - 1621 |
Effects of B2O3 on the phase stability of Ba2Ti9O20 microwave ceramic
Wang SF, Chung CC, Wang CH, Chu JP |
| 1622 - 1624 |
Inhomogeneity of grain-boundary resistivity in calcia-stabilized zirconia
Lee JH, Lee JH, Kim DY |
| 1625 - 1627 |
Water-induced degradation in zinc oxide-based ceramic varistors
Chen WP, Chan HLW |
| 1628 - 1630 |
Synthesis of two-phase SiAlONs in the yttrium-silicon-aluminum-oxygen-nitrogen system
Bandyopadhyay S, Maiti HS |
| 1631 - 1633 |
Effect of nitrogen atmosphere on the densification of a 3-mol %-yttria-doped zirconia
Paek YK, Ahn JH, Kim GH, Kang SJL |
| 1634 - 1636 |
Reaction sintering and mechanical properties of hydroxyapatite-zirconia composites with calcium fluoride additions
Kim HW, Koh YH, Yoon BH, Kim HE |
| 1637 - 1639 |
Alkoxide sol-gel-processed cordierite fiber
Tsai MT |
| 1640 - 1642 |
Influence of threshold stress on the estimation of the Weibull statistics
Lu CS, Danzer R, Fischer FD |
| 1643 - 1645 |
Comment on "Inverse problem for composites with imperfect interface: Determination of interfacial thermal resistance, thermal conductivity of constituents, and microstructural parameters"
Hasselman DPH |
| 1646 - 1647 |
Comment on "Inverse problem for composites with imperfect interface: Determination of interfacial thermal resistance, thermal conductivity of constituents, and microstructural parameters" - Reply
Nan CW |
| 1648 - 1648 |
Stress development during constrained sintering of alumina/glass/alumina sandwich structure (vol 85, pg 335, 2002)
Tzeng SY, Jean JH |
