Applied Surface Science

Applied Surface Science, Vol.288 Entire volume, number list

ISSN: 0169-4332 (Print)

In this Issue (102 articles)

1 - 8	CO2 laser coating of nanodiamond on aluminum using an annular beam Blum R, Molian P
9 - 14	Pulse laser machining and particulate separation from high impact polystyrene Arif S, Kautek W
15 - 25	Nanostructured WS2-Ni composite films for improved oxidation, resistance and tribological performance Xu SS, Gao XM, Hu M, Sun JY, Jiang D, Zhou F, Liu WM, Weng LJ
26 - 33	Experimental and numerical study of residual stress evolution in cold spray coating Ghelichi R, Bagherifard S, MacDonald D, Fernandez-Pariente I, Jodoin B, Guagliano M
34 - 39	Nanosecond laser surface modification of AISI 304L stainless steel: Influence the beam overlap on pitting corrosion resistance Pacquentin W, Caron N, Oltra R
40 - 43	Evolution of Raman spectra in n-InAs wafer with annealing temperature Deng HY, Guo JH, Zhang Y, Cong R, Hu GJ, Yu GL, Dai N
44 - 50	Improvement of adhesion strength and scratch resistance of fluorocarbon thin films by cryogenic treatment Jiang XJ, Wang J, Shen JP, Li R, Yang GC, Huang H
51 - 59	A facile approach for the synthesis of magnetic separable Fe3O4@TiO2, core shell nanocomposites as highly recyclable photocatalysts Xin TJ, Ma ML, Zhang HP, Gu JW, Wang SJ, Liu MJ, Zhang QY
60 - 68	Facile fabrication of core-shell Pr6O11-ZnO modified silane coatings for anti-corrosion applications Jothi KJ, Palanivelu K
69 - 75	Density functional theory studies of electronic properties of PdAg/Pd surface alloys Li Q, Song LJ, Pan LH, Chen YC, Ling ML, Zhuang XL, Zhang XT
76 - 82	Effect of complexing agent TEA: The structural, morphological, topographical and optical properties of FexSx nano thin films deposited by SILAR technique Manikandan K, Mani P, Dilip CS, Valli S, Inbaraj PFH, Prince JJ
83 - 89	Atomic scale fabrication of dangling bond structures on hydrogen passiyated Si(001) wafers processed and nanopackaged in a clean room environment Kolmer M, Godlewski S, Zuzak R, Wojtaszek M, Rauer C, Thuaire A, Hartmann JM, Moriceau H, Joachim C, Szymonski M
90 - 97	The effect of pretreatment conditions on structural, morphological and catalytic properties of TiO2 Kocemba I, Nadajczyk J, Rynkowski J, Maniukiewicz W
98 - 108	Investigating phosphonate monolayer stability on ALD oxide surfaces Branch B, Dubey M, Anderson AS, Artyushkova K, Baldwin JK, Petsev D, Dattelbaum AM
109 - 114	The influence of different locations of sputter guns on the morphological and structural properties of Cu-In-Ga precursors and Cu(ln,Ga)Se-2 thin films Wang J, Zhu J, He YX
115 - 121	Ag (100)/MgO(100) interface: A van der Waals density functional study He BL, Ma DW, Hao W, Xiao W, Tian ZX
122 - 129	Characterization of ester- or thioamide-functionalized single-walled carbon nanotube-azithromycin conjugates Darabi HR, Roozkhosh A, Tehrani MJ, Aghapoor K, Sayahi H, Balavar Y, Mohsenzadeh F
130 - 137	Coating of biodegradable magnesium alloy bone implants using nanostructured diopside (CaMgSi2O6) Razavi M, Fathi M, Savabi O, Beni BH, Razavi SM, Vashaee D, Tayebi L
138 - 142	Preparation of CdIn2S4 microspheres and application for photocatalytic reduction of carbon dioxide Jiang WL, Yin XH, Xin F, Bi YD, Liu Y, Li X
143 - 148	Osteoblast response on co-modified titanium surfaces via anodization and electrospinning Bayram C, Demirbilek M, Yalcin E, Bozkurt M, Dogan M, Denkbas EB
149 - 157	Magnetic chitosan nanocomposite for hyperthermia therapy application: Preparation, characterization and in vitro experiments Shete PB, Patil RM, Thorat ND, Prasad A, Ningthoujam RS, Ghosh SJ, Pawar SH
158 - 165	The negative temperature coefficient resistivities of Ag2S-Ag core shell structures Yu MM, Liu DZ, Li W, Zhou XQ
166 - 171	The effect of substrate temperature on structural and morphological properties of Au/Si(111) thin films Marconi D, Ungurean A
172 - 179	Synthesis of hollow CdS micro-fnanospheres by CoSP technique and their visible light photocatalytic activities Kumar N, Dutta V
180 - 192	Synthesis and characterization of Fe3O4@ZnS and Fe3O4@Au@ZnS core-shell nanoparticles Stefan M, Leostean C, Pana O, Soran ML, Suciu RC, Gautron E, Chauvet O
193 - 200	Development of a nanostructured lipid carrier formulation for increasing photo-stability and water solubility of Phenylethyl Resorcinol Fan HF, Liu GQ, Huang YQ, Li Y, Xia Q
201 - 207	TiO2 anatase films obtained by direct liquid injection atomic layer deposition at low temperature Avril L, Reymond-Laruinaz S, Decams JM, Bruyere S, Potin V, de Lucas MCM, Imhoff L
208 - 214	Correlation between contact surface and friction during the optical glass polishing Belkhir N, Aliouane T, Bouzid D
215 - 221	Domain growth of carbon nanotubes assisted by dewetting of thin catalyst precursor films Srivastava AK, Sachan P, Samanta C, Mukhopadhyay K, Sharma A
222 - 228	Fabrication of a super-hydrophobic surface on metal using laser ablation and electrodeposition Kwon MH, Shin HS, Chu CN
229 - 237	An optimization of superhydrophobic polyvinylidene fluoride/zinc oxide materials using Taguchi method Mohamed AMA, Jafari R, Farzaneh M
238 - 243	Theoretical study on electronic and optical properties of In0.53Ga0.47As (100) beta 2 (2 x 4) surface Guo J, Chang BK, Jin MC, Yang MZ, Wang HG, Wang MS, Huang JC, Zhou L, Zhang YJ
244 - 250	DFT plus U study on the oxygen adsorption and dissociation on CeO2-supported platinum cluster Nguyen TQ, Escano MCS, Nakanishi H, Kasai H, Maekawa H, Osumi K, Sato K
251 - 257	Rapid surface treatment of polyamide 12 by microwave plasma jet Hnilica J, Potocnakova L, Stupavska M, Kudrle V
258 - 264	Influences of post-annealing conditions on the formation of delafossite-CuFeO2 thin films Chen HY, Fu GW
265 - 274	Functions of Trilon (R) P as a polyamine in copper chemical mechanical polishing Jiang L, Lan YQ, He YY, Li YZ, Luo JB
275 - 287	Surface structures and thermodynamics of low-index of rutile, brookite and anatase - A comparative DFT study Esch TR, Gadaczek I, Bredow T
288 - 294	A study of the initial film growth of PEG-like plasma polymer films via XPS and NEXAFS Li YL, Muir BW, Easton CD, Thomsen L, Nisbet DR, Forsythe JS
295 - 303	Treatments of paper surfaces with sol-gel coatings for laminated plywood Wang SX, Jamsa S, Mahlberg R, Ihalainen P, Nikkola J, Mannila J, Ritschkoff AC, Peltonen J
304 - 312	Deposition of alumina stabilized zirconia at room temperature by plasma focus device Khan IA, Rawat RS, Ahmad R, Shahid MAK
313 - 323	Surface morphology and phase transformations of femtosecond laser-processed sapphire Vilar R, Sharma SP, Almeida A, Cangueiro LT, Oliveira V
324 - 330	Determination of the thermal properties of AlB2-type WB2 Jiang CL, Pei ZL, Liu YM, Lei H, Gong J, Sun C
331 - 340	The structural and bio-corrosion barrier performance of Mg-substituted fluorapatite coating on 316L stainless steel human body implant Sharifnabi A, Fathi MH, Yekta BE, Hossainalipour M
341 - 348	Fabrication of lotus-leaf-like superhydrophobic surfaces via Ni-based nano-composite electro-brush plating Liu HT, Wang XM, Ji HM
349 - 355	Preparation and characterization of energetic materials coated superfine aluminum particles Liu SS, Ye MQ, Han AJ, Chen X
356 - 362	Cassava root husks powder as green adsorbent for the removal of Cu(II) from natural river water Jorgetto AO, Silva RIV, Saeki MJ, Barbosa RC, Martines MAU, Jorge SMA, Silva ACP, Schneider JF, Castro GR
363 - 368	Contrastive study of structure and photocatalytic performance with three-dimensionally ordered macroporous CuO-TiO2 and CuO/TiO2 Yang RC, Yang LJ, Tao TX, Ma FY, Xu MD, Zhang ZH
369 - 372	Solvothermal synthesis of BiOBr thin film and its photocatalytic performance Liu ZS, Wu BT, Niu JN, Huang X, Zhu YB
373 - 380	Functionalisation of mesoporous silica gel with 2-[(phosphonomethyl)-amino]acetic acid functional groups. Characterisation and application Caldarola D, Mitev DP, Marlin L, Nesterenko EP, Paull B, Onida B, Bruzzoniti MC, De Carlo RM, Sarzanini C, Nesterenko PN
381 - 391	Elimination of impurity phase formation in FePt magnetic thin films prepared by pulsed laser deposition Wang Y, Medwal R, Sehdev N, Yadian B, Tan TL, Lee P, Talebitaher A, Ilyas U, Ramanujan RV, Huang YZ, Rawat RS
392 - 397	Surface and interface study of U/Si (111) Chen QY, Feng W, Zhu XG, Luo LZ, Xie DH, Tan SY, Lai XC
398 - 404	Phase transformation-induced crystal plane effect of iron oxide micropine dendrites on gaseous toluene photocatalytic oxidation Wu HJ, Wang LD
405 - 410	Neutron-reflectometry study of alcohol adsorption on various DLC coatings Kalin M, Simic R, Hirayama T, Geue T, Korelis P
411 - 415	Impact of rapid thermal annealing on structural, optical and electrical properties of DC sputtered doped and co-doped ZnO thin film Gupta CA, Mangal S, Singh UP
416 - 422	Influence of accelerating gas flow rate on the particle cohesion in room temperature cold sprayed scattering layer for plastic-based dye-sensitized solar cells He XL, Yang GJ, Li CJ, Li CX
423 - 429	Low energy SIMS characterization of passive oxide films formed on a low-nickel stainless steel in alkaline media. Fajardo S, Bastidas DM, Ryan MP, Criado M, McPhail DS, Morris RJH, Bastidas JM
430 - 434	Atomic layer deposited Al2O3 films for anti-reflectance and surface passivation applications Zhu LQ, Liu YH, Zhang HL, Xiao H, Guo LQ
435 - 443	The origin of the curing behavior, mechanical and thermal properties of surface functionalized attapulgite/bismaleimide/diallylbisphenol composites Zhao L, Liu P, Liang GZ, Gu AJ, Yuan L, Guan QB
444 - 451	Optically active SiO2/TiO2/polyacetylene multilayered nanospheres: Preparation, characterization, and application for low infrared emissivity Bu XH, Zhou YM, He M, Chen ZJ, Zhang T
452 - 457	Density functional theory study on the mechanism of CO sensing on Cu2O (111) surface: Influence of the pre-adsorbed oxygen atom Shen YY, Tian FH, Chen SG, Ma ZQ, Zhao LH, Jia XF
458 - 465	Instrument response of reflection high energy electron diffraction pole figure Chen L, Dash J, Su P, Lin CF, Bhat I, Lu TM, Wang GC
466 - 477	Surface characterization and effectiveness evaluation of anti-graffiti coatings on highly porous stone materials Lettieri M, Masieri M
478 - 481	Structural stability of scandium on nonpolar GaN (1 1 (2)over-bar 0) and (1 0 (1)over-bar 0) surfaces: A first-principles study Gonzalez-Hernandez R, Martinez G, Lopez-Perez W, Rodriguez JA
482 - 487	Effects of Si doping on the strain relaxation of metamorphic (Al)GaInP buffers grown on GaAs substrates Li KL, Dong JR, Sun YR, Zeng XL, Zhao YM, Yu SZ, Zhao CY, Yang H
488 - 496	Correlation between wetting, adhesion and adsorption in the polymer-aqueous solutions of ternary surfactant mixtures-air systems Szymczyk K, Zdziennicka A, Krawczyk J, Janczuk B
497 - 502	Protection of aluminium foil AA8021 by molybdate-based conversion coatings Liang CS, Lv ZF, Zhu YL, Xu SA, Wang H
503 - 512	The photoactivity of titanium dioxide coatings with silver nanoparticles prepared by sol-gel and reactive magnetron sputtering methods -comparative studies Kadziola K, Piwonski I, Kisielewska A, Szczukocki D, Krawczyk B, Sielski J
513 - 517	Electrodeposition preparation of Ag nanoparticles loaded TiO2 nanotube arrays with enhanced photocatalytic performance Liu X, Liu ZQ, Lu JL, Wu XL, Xu B, Chu W
518 - 523	Synthesis of novel reactive N-halamine precursors and application in antimicrobial cellulose Jiang ZM, Ma KK, Du JM, Li R, Ren XH, Huang TS
524 - 529	Gold nanoparticles directly modified glassy carbon electrode for non-enzymatic detection of glucose Chang G, Shu HH, Ji K, Oyama M, Liu X, He YB
530 - 536	Electrodeposition mechanism and characterization of Ni-Cu alloy coatings from a eutectic-based ionic liquid Wang SH, Guo XW, Yang HY, Dai JC, Zhu RY, Gong J, Peng LM, Ding WJ
537 - 541	Influence of poly(ethylene glycol) as pore-generator on morphology and performance of chitosan/poly(vinyl alcohol) membrane adsorbents Salehi E, Madaeni SS
542 - 549	Surface modifications induced by pulsed-laser texturing-Influence of laser impact on the surface properties Costil S, Lamraoui A, Langlade C, Heintz O, Oltra R
550 - 557	Craters and nanostructures with laser ablation of metal/metal alloy in air and liquid Patel DN, Singh RP, Thareja RK
558 - 563	Facile fabrication of superhydrophobic Bi/Bi2O3 surfaces with hierarchical micro-nanostructures by electroless deposition or electrodeposition Cao L, Lu XQ, Pu F, Yin XL, Xia Y, Huang W, Li ZL
564 - 571	Atomic scale insights into ethanol oxidation on Pt, Pd and Au metallic nanofilms: A DFT with van der Waals interactions Pereira AO, Miranda CR
572 - 578	Pulsed laser deposition of piezoelectric ZnO thin films for bulk acoustic wave devices Serhane R, Abdelli-Messaci S, Lafane S, Khales H, Aouimeur W, Hassein-Bey A, Boutkedjirt T
579 - 583	Superhydrophobic PDMS surfaces with three-dimensional (3D) pattern-dependent controllable adhesion Yong JL, Yang Q, Chen F, Zhang DS, Du GQ, Bian H, Si JH, Yun F, Hou X
584 - 590	Structural and chemical transformations in the products of the interaction of silica gel with vapours of TiCl4 and H2O Koshtyal YM, Malkov AA, Taulemesse JM, Petrov SN, Krasilin AA, Malygin AA
591 - 598	Theoretical and experimental analysis of electric contact surface hardening of ductile iron Qi XB, Zhu SG, Ding H, Xu MK
599 - 603	Structural, optical and electrical characterization of ITO, ITO/Ag and ITO/Ni transparent conductive electrodes Ali AH, Shuhaimi A, Hassan Z
604 - 608	Preparation of indium tin oxide anodes using energy filtrating technique for top-emitting organic light-emitting diode Wang ZY, Yao N, Han CB, Hu X
609 - 618	First-principles investigations on the electronic properties and stabilities of low-index surfaces of L1(2)-Al3Sc intermetallic Sun SP, Li XP, Wang HJ, Jiang HF, Lei WN, Jiang Y, Yi DQ
619 - 624	Fabrication of patterned surfaces that exhibit variable wettability ranging from superhydrophobicity to high hydrophilicity by laser irradiation Lee C, Cho H, Kim D, Hwang W
625 - 632	Ultrasound assisted green synthesis of poly(vinyl alcohol) capped silver nanoparticles for the study of its antifilarial efficacy Saha SK, Chowdhury P, Saini P, Babu SPS
633 - 640	Enhanced wet hydrogen peroxide catalytic oxidation performances based on CuS nanocrystals/reduced graphene oxide composites Qian J, Wang K, Guan QM, Li HA, Xu H, Liu Q, Liu W, Qiu BJ
641 - 648	Magnetic nanoparticles with surfaces modified with chitosan-poly[N-benzyl-2-(methacryloxy)-N,N-dimethylethanaminium bromide] for lipase immobilization Ziegler-Borowska M, Siodmiak T, Chelminiak D, Cyganiuk A, Marszall MP
649 - 653	Cell spreading on titanium dioxide film formed and modified with aerosol beam and femtosecond laser Shinonaga T, Tsukamoto M, Nagai A, Yamashita K, Hanawa T, Matsushita N, Xie GQ, Abe N
654 - 659	Influence of anodization parameters on the volume expansion of anodic aluminum oxide formed in mixed solution of phosphoric and oxalic acids Kao TT, Chang YC
660 - 665	Role of surfactant-mediated electrodeposited titanium oxide substrate in improving electrocatalytic features of supported platinum particles Spataru T, Preda L, Osiceanu P, Munteanu C, Anastasescu M, Marcu M, Spataru N
666 - 672	Effects of carbon fiber surface characteristics on interfacial bonding of epoxy resin composite subjected to hygrothermal treatments Li M, Liu HX, Gu YZ, Li YX, Zhang ZG
673 - 676	Decomposition of SnH4 molecules on metal and metal-oxide surfaces Ugur D, Storm AJ, Verberk R, Brouwer JC, Sloof WG
677 - 681	Comparison of surface effects in SiO2 coated and uncoated nickel ferrite nanoparticles Nadeem K, Krenn H, Sarwar W, Mumtaz M
682 - 689	Influence of silane surface modification of veneer on interfacial adhesion of wood-plastic plywood Fang L, Chang L, Guo WJ, Chen YP, Wang Z
690 - 694	NH3 adsorption on the Lewis and Bronsted acid sites of MoO3 (010) surface: A cluster DFT study Yan ZF, Fan JY, Zuo ZJ, Li Z, Zhang JS
695 - 701	X-ray photoelectron spectroscopy of Sm-doped layered perovskite for intermediate temperature-operating solid oxide fuel cell Kim Y, Schlegl H, Kim K, Irvine JTS, Kim JH
702 - 709	Catalytic growth of carbon nanowires on composite diamond/silicon substrates Sellam A, Miska P, Ghanbaja J, Barrat S
710 - 717	Acetate-intercalated Ni-In layered double hydroxides with low infrared emissivity: Synthesis, delamination and restacked to form the multilayer films Wang YJ, Zhou YM, Zhang T, He M, Bu XH, Yang XM
718 - 726	In vitro degradation and biocompatibility of a strontium-containing micro-arc oxidation coating on the biodegradable ZK60 magnesium alloy Lin X, Yang XM, Tan LL, Li M, Wang X, Zhang Y, Yang K, Hu ZQ, Qiu JH
727 - 735	The tribocorrosion behaviour of NiTi alloy Kosec T, Mocnik P, Legat A
736 - 741	Nano-MoS2/poly (3,4-ethylenedioxythiophene): Poly(styrenesulfonate) composite prepared by a facial dip-coating process for Li-ion battery anode Zhao XL, Mai YJ, Luo H, Tang DP, Lee B, Huang CU, Zhang LZ
742 - 746	Favorable binding effect for improving the electrochemical performance of cobalt oxide anode for lithium ion batteries Wang WL, Nguyen VH, Gu HB