1 - 5 |
Thermal stability study of Cr/Au contact formed on n-type Ga-polar GaN, N-polar GaN, and wet-etched N-polar GaN surfaces Choi Y, Kim Y, Ahn KS, Kim H |
6 - 10 |
Evolution of plasticity in nanometric cutting of Fe single crystals Gao Y, Urbassek HM |
11 - 18 |
The oxidization behavior and mechanical properties of ultrananocrystalline diamond films at high temperature annealing Huang K, Hu XJ, Xu H, Shen YG, Khomich A |
19 - 25 |
Nanostructured ZnO thin films prepared by sol-gel spin-coating Heredia E, Bojorge C, Casanova J, Canepa H, Craievich A, Kellermann G |
26 - 34 |
Adsorption kinetics of NO on ordered mesoporous carbon (OMC) and cerium-containing OMC (Ce-OMC) Chen JH, Cao FF, Chen SZ, Ni MJ, Gao X, Cen KF |
35 - 42 |
Synthesis of organic rectorite with novel Gemini surfactants for copper removal Han GC, Han Y, Wang XY, Liu SJ, Sun RC |
43 - 48 |
One-dimensional mesoporous Fe2O3@TiO2 core-shell nanocomposites: Rational design, synthesis and application as high-performance photocatalyst in visible and UV light region Zhang X, Xie YP, Chen HX, Guo JX, Meng AL, Li CF |
49 - 55 |
Synthesis of silver nanoparticles on surface-functionalized multi-walled carbon nanotubes by ultraviolet initiated photo-reduction method Lei YH, Gao GH, Liu WC, Liu T, Yin YS |
56 - 66 |
Long-term antibiotic delivery by chitosan-based composite coatings with bone regenerative potential Ordikhani F, Simchi A |
67 - 72 |
Removal of brownish-black tarnish on silver-copper alloy objects with sodium glycinate de Figueiredo JCD, Asevedo SS, Barbosa JHR |
73 - 83 |
Surface and bulk characterization of an ultrafine South African coal fly ash with reference to polymer applications van der Merwe EM, Prinsloo LC, Mathebula CL, Swart HC, Coetsee E, Doucet FJ |
84 - 89 |
Graphite coated with manganese oxide/multiwall carbon nanotubes composites as anodes in marine benthic microbial fuel cells Fu YB, Yu J, Zhang YL, Meng Y |
90 - 97 |
Influence of chitosan-PEG binary template on the crystallite characteristics of sol-gel synthesized mesoporous nano-titania photocatalyst Preethi T, Abarna B, Rajarajeswari GR |
98 - 102 |
Spatially selective Er/Yb-doped CaF2 crystal formation by CO2 laser exposure Kim DS, Lee JH, Lim KS |
103 - 110 |
Surface properties and hydrophobic recovery of polymers treated by atmospheric-pressure plasma Borcia C, Punga IL, Borcia G |
111 - 116 |
The poisoning effect of Na and K on Mn/TiO2 catalyst for selective catalytic reduction of NO with NH3: A comparative study Guo RT, Wang QS, Pan WG, Zhen WL, Chen QL, Ding HL, Yang NZ, Lu CZ |
117 - 124 |
Hydrogen gas sensing feature of polyaniline/titania (rutile) nanocomposite at environmental conditions Moghaddam HM, Nasirian S |
125 - 130 |
The effects of cold rolling temperature on corrosion resistance of pure iron Lv JL, Luo HY |
131 - 139 |
Chemical, mechanical and antibacterial properties of silver nanocluster/silica composite coated textiles for safety systems and aerospace applications Ferraris S, Perero S, Miola M, Verne E, Rosiello A, Ferrazzo V, Valletta G, Sanchez J, Ohrlander M, Tjornhammar S, Fokine M, Laurell F, Blomberg E, Skoglund S, Wallinder IO, Ferraris M |
140 - 146 |
Wetting of polycrystalline SiC by molten Al and Al-Si alloys Cong XS, Shen P, Wang Y, Jiang QC |
147 - 153 |
Preparation of silane-functionalized silica films via two-step dip coating sol-gel and evaluation of their superhydrophobic properties Ramezani M, Vaezi MR, Kazemzadeh A |
154 - 159 |
Impact of annealing on the electrodeposited WS2 thin films: Enhanced photodegradation of coupled semiconductor Jana S, Bera P, Chakraborty B, Mitra BC, Mondal A |
160 - 166 |
Sol-gel preparation and characterization of SiO2 coated VO2 films with enhanced transmittance and high thermochromic performance Li DZ, Shan YK, Huang FQ, Ding SJ |
167 - 171 |
Investigation of the particle size distribution of the ejected material generated during the single femtosecond laser pulse ablation of aluminium Wu H, Zhang N, Zhu XN |
172 - 180 |
Fabrication, ultra-structure characterization and in vitro studies of RF magnetron sputter deposited nano-hydroxyapatite thin films for biomedical applications Surmeneva MA, Surmenev RA, Nikonova YA, Selezneva II, Ivanova AA, Putlyaev VI, Prymak O, Epple M |
181 - 187 |
1,10-Phenanthroline as an accelerator for Ag nanoparticle-catalysed electroless copper deposition Liu CR, Chou NK, Li CH, Chen HR, Lee CL |
188 - 197 |
Comparison of interface mechanics characteristics of DLC coating deposited on bearing steel and ceramics Nie CY, Zheng DZ, Gu L, Zhao XL, Wang LQ |
198 - 209 |
Role of electrolyte composition on structural, morphological and in-vitro biological properties of plasma electrolytic oxidation films formed on zirconium Sandhyarani M, Prasadrao T, Rameshbabu N |
210 - 219 |
Enhancing antibiofouling performance of Polysulfone (PSf) membrane by photo-grafting of capsaicin derivative and acrylic acid Wang J, Sun HJ, Gao XL, Gao CJ |
220 - 225 |
Highly controllable and reproducible ZnO nanowire arrays growth with focused ion beam and low-temperature hydrothermal method Diao KD, Zhang JC, Zhou MJ, Tang YJ, Wang SX, Cui XD |
226 - 235 |
Surface functionalized magnetic PVA microspheres for rapid naked-eye recognizing of copper(II) ions in aqueous solutions Hua ZL, Yang B, Chen W, Bai X, Xu QJ, Gu HX |
236 - 240 |
Synthesis of ZnSe nanocrystals (NCs) using a rapid microwave irradiation method and investigation of the effect of copper (Cu) doping on the optical properties Molaei M, Khezripour AR, Karimipour M |
241 - 251 |
Pyridine adsorption on NiSn/MgO-Al2O3: An FTIR spectroscopic study of surface acidity Penkova A, Bobadilla LF, Romero-Sarria F, Centeno MA, Odriozola JA |
252 - 256 |
Improvement of aluminum drilling efficiency and precision by shaped femtosecond laser Qi Y, Qi HX, Chen AM, Hu Z |
257 - 261 |
Multi-layered nanostructure Bi2Se3 grown by chemical vapor deposition in selenium-rich atmosphere Liu M, Liu FY, Man BY, Bi D, Xu XY |
262 - 268 |
Copper ion implanted aluminum nitride dilute magnetic semiconductors (DMS) prepared by molecular beam epitaxy Shah A, Ahmad J, Ahmad I, Mehmood M, Mahmood A, Rasheed MA |
269 - 277 |
Influence of Zr alloying on the mechanical properties, thermal stability and oxidation resistance of Cr-Al-N coatings Li WZ, Chen QZ, Polcar T, Serra R, Cavaleiro A |
278 - 283 |
Evaluation of PHBV/calcium silicate composite scaffolds for cartilage tissue engineering Wu J, Sun JY, Liu JB |
284 - 293 |
Synthesis of boron and nitrogen doped graphene supporting PtRunanoparticles as catalysts for methanol electrooxidationJiming Lu JM, Zhou YK, Tian XH, Xu X, Zhu HX, Zhang SW, Yuan T |
294 - 301 |
An investigation of ruthenium coating from LiCl-KCl eutectic melt Sireli GK |
302 - 311 |
Novel high potential visible-light-active photocatalyst of CNT/Mo, S-codoped TiO2 hetero-nanostructure Hamadanian M, Shamshiri M, Jabbari V |
312 - 318 |
Fe-0.4 wt.%C-6.5 wt.%Cr hardfacing coating: Microstructures and wear resistance with La2O3 additive Hou XR, Zhao B, Yang J, Xing XL, Zhou YF, Yang YL, Yang QX |
319 - 324 |
Preparation and properties of red inorganic hollow nanospheres for electrophoretic display Fang Y, Wang SR, Xiao Y, Li XG |
325 - 331 |
Study on the mechanism of surface modification of magnesium oxysulfate whisker Dang L, Nai XY, Zhu DH, Jing YW, Liu X, Dong YP, Li W |
332 - 337 |
Effect of ionic strength on ruthenium CMP in H2O2-based slurries Jiang L, He YY, Li YZ, Luo JB |
338 - 349 |
Effects of thermal efficiency in DCMD and the preparation of membranes with low thermal conductivity Li ZH, Peng YL, Dong YJ, Fan HW, Chen P, Qiu L, Jiang Q |
350 - 359 |
Oxidative-reforming of model biogas over NiO/Al2O3 catalysts: The influence of the variation of support synthesis conditions Asencios YJO, Elias KFM, Assaf EM |
360 - 369 |
Isothermal oxidation behaviour of thermal barrier coatings with CoCrAlY bond coat irradiated by high-current pulsed electron beam Cai J, Guan QF, Hou XL, Wang ZP, Su JX, Han ZY |
370 - 377 |
In situ formation of Ni(OH)(2) nanoparticle on nitrogen-doped reduced graphene oxide nanosheet for high-performance supercapacitor electrode material Liu HD, Zhang JL, Xu DD, Zhang B, Shi L, Huang LH, Tan SZ |
378 - 384 |
Microstructure and elevated temperature wear behavior of induction melted Fe-based composite coating Hu G, Meng HM, Liu JY |
385 - 392 |
Effects of UV weathering on surface properties of polypropylene composites reinforced with wood flour, lignin, and cellulose Peng Y, Liu R, Cao JZ, Chen Y |
393 - 399 |
Preparation and characterization of crystalline titania film on polyimide substrate by SILAR Shi YP, Wu YY, Sun CY, Huo MX |
400 - 404 |
Preparation and optical properties of Mg-doped ZnO nanorods Guo N, Wei XQ, Zhao RR, Xu XJ |
405 - 413 |
Heat treatment effect on erosion behavior of poly(methylmethacrylate) for optical transmittance efficiency Coban O |
414 - 421 |
Fabrication of nanostructured CuO films by electrodeposition and their photocatalytic properties Wang YQ, Jiang TT, Meng DW, Yang J, Li YC, Ma Q, Han J |
422 - 431 |
Fabrication and characterization of mesoporous activated carbon from Lemna minor using one-step H3PO4 activation for Pb(II) removal Huang Y, Li SX, Lin HB, Chen JH |
432 - 442 |
Molecular dynamics simulations of nanometric cutting mechanisms of amorphous alloy Zhu PZ, Qiu C, Fang FZ, Yuan DD, Shen XC |
443 - 448 |
Fabrication of sulfur-functionalized DLC films by photochemical modification and attachment of gold nanoparticles Nakamura T, Tsuchiya T, Ohana T |
449 - 456 |
Features of the formation of nanoparticles based on copper in thin-layer systems Ragachev AV, Jiang XH, Liu XH, Yarmolenko MA, Rogachev AA, Gorbachev DL, Liu ZB |
457 - 461 |
High rate dry etching of (BiSb)(2)Te-3 film by CH4/H-2-based plasma Song JQ, Shi X, Chen LD |
462 - 468 |
Optimization of functionalization conditions for protein analysis by AFM Arroyo-Hernandez M, Daza R, Perez-Rigueiro J, Elices M, Nieto-Marquez J, Guinea GV |
469 - 475 |
Insights into the microstructural and physical properties of colloidal Fe:ZnSe nanocrystals Xie RS, Li YL, Jiang LH, Zhang XQ |
476 - 479 |
Medium energy Art-ion induced ripple formation: Role of ion energy in pattern formation Garg SK, Datta DP, Ghatak J, Tripathy SR, Kanjilal D, Som T |
480 - 485 |
LaF3 nanoparticles surface modified with tryptophan and their optical " CrossMark properties Safronikhin A, Ehrlich H, Lisichkin G |
486 - 489 |
One-step, simple, and green synthesis of tin dioxide/graphene nanocomposites and their application to lithium-ion battery anodes Jiang ZX, Zhang DJ, Li Y, Cheng H, Wang MQ, Wang XQ, Bai YP, Lv HB, Yao YT, Shao L, Huang YD |
490 - 495 |
Ti1-xAgx electrodes deposited on polymer based sensors Marques SM, Manninen NK, Ferdov S, Lanceros-Mendez S, Carvalho S |
496 - 504 |
Pt catalysts on PANI coated WC/C nanocomposites for methanol electro-oxidation and oxygen electro-reduction in DMFC Yaldagard M, Jahanshahi M, Seghatoleslami N |
505 - 510 |
A facile fabrication of multifunctional knit polyester fabric based on chitosan and polyaniline polymer nanocomposite Tang XN, Tian MW, Qu LJ, Zhu SF, Guo XQ, Han GT, Sun KK, Hu XL, Wang YJ, Xu XQ |
511 - 516 |
DFT study of adsorption and dissociation behavior of H2S on Fe-doped graphene Zhang HP, Luo XG, Song HT, Lin XY, Lu X, Tang YH |
517 - 525 |
RhB-sensitized effect on the enhancement of photocatalytic activity of BiOCl toward bisphenol-A under visible light irradiation Mao XM, Fan CM, Wang YW, Wang YF, Zhang XC |
526 - 533 |
Modeling the impact, flattening and solidification of a molten droplet on a solid substrate during plasma spraying Zheng YZ, Li Q, Zheng ZH, Zhu JF, Cao PL |
534 - 544 |
The freezing process of continuously sprayed water droplets on the superhydrophobic silicone acrylate resin coating surface Hu JL, Xu K, Wu Y, Lan BH, Jiang XL, Shu LC |
545 - 551 |
Fabrication of hierarchical structures with ZnO nanowires on micropillars by UV soft imprinting and hydrothermal growth for a controlled morphology and wettability Hu J, Sun YJ, Zhang WD, Gao FQ, Li PW, Jiang D, Chen Y |
552 - 559 |
Synthesis and properties of a magnetic core-shell composite nano-adsorbent for fluoride removal from drinking water Zhang C, Chen L, Wang TJ, Su CL, Jin Y |
560 - 567 |
Analysis of moving surface structures at a laser-induced boiling front Matti RS, Kaplan AFH |
568 - 572 |
Defects improved photocatalytic ability of TiO2 Li L, Tian HW, Meng FL, Hu XY, Zheng WT, Sun CQ |
573 - 580 |
Thermal degradation of TiO2 nanotubes on titanium Shivaram A, Bose S, Bandyopadhyay A |
581 - 592 |
Tribological properties of amorphous hydrogenated (a-C:H) and hydrogen-free tetrahedral (ta-C) diamond-like carbon coatings under jatropha biodegradable lubricating oil at different temperatures Mobarak HM, Masjuki HH, Mohamad EN, Kalam MA, Rashedul HK, Rashed MM, Habibullah M |
593 - 597 |
Kinetics of nitrogen incorporation at the SiO2/4H-SiC interface during an NO passivation Chen ZJ, Xu Y, Garfunkel E, Feldman LC, Buyuklimanli T, Ou W, Serfass J, Wan A, Dhar S |
598 - 606 |
Microstructure and thermal shock resistance of the peg-nail structured TBCs treated by selective laser modification Chang F, Zhou KS, Tong X, Xu LP, Zhang XF, Liu M |
607 - 613 |
Structural and optical properties investigation of DC magnetron sputtered beta-TiO2 thin film Khan S, Ahmed I, Shah A |
614 - 621 |
Wear and corrosion resistance of anti-bacterial Ti-Cu-N coatings on titanium implants Wu HB, Zhang XY, He XJ, Li M, Huang XB, Hang RQ, Tang B |
622 - 629 |
Polypyrrole-ZnFe2O4 magnetic nano-composite with core-shell structure for glucose sensing Shahnavaz Z, Lorestani F, Alias Y, Woi PM |
630 - 638 |
Synthesis and processing of ELISA polymer substitute: The influence of surface chemistry and morphology on detection sensitivity Hosseini S, Ibrahim F, Djordjevic I, Rothan HA, Yusof R, van der Marel C, Koole LH |
639 - 647 |
Investigation of optical and morphological properties of metalized nanocomposites Varnaite-Zuravliova S, Jankauskaite V, Guobiene A, Prosycevas I |
648 - 656 |
Water-phase strategy for synthesis of TiO2-graphene composites with tunable structure for high performance photocatalysts Hua CY, Chen F, Lu TW, Lian CJ, Zheng SZ, Hu QH, Duo SW, Zhang RB |
657 - 665 |
An investigation on the inhibitory action of benzazole derivatives as a consequence of sulfur atom induction Moradi Z, Attar MM |
666 - 671 |
Morphological features of silicon substrate by using different frequency laser ablation in air and water Xu JY, Hu H, Lei YL |
672 - 681 |
Controllable electrodeposition of ZnO nanorod arrays on flexible stainless steel mesh substrate for photocatalytic degradation of Rhodamine B Lu H, Zhang M, Guo M |
682 - 687 |
One-pot synthesis of ZnO/ZnGa2O4 heterojunction with X/XY structure for improved photocatalytic activity Ma BJ, Lin KY, Su WG, Liu WY |
688 - 695 |
Noteworthy impacts of polyurethane-urea ionomers as the efficient polar coatings on adhesion strength of plasma treated polypropylene Chashmejahanbin MR, Daemi H, Barikani M, Salimi A |
696 - 700 |
High temperature thermal stability investigations of ammonium sulphide passivated InGaAs and interface formation with Al2O3 studied by synchrotron radiation based photoemission Chauhan L, Gajula DR, McNeill D, Hughes G |
701 - 709 |
Fabrication of superhydrophobic surface on aluminum by continuous chemical etching and its anti-icing property Liao RJ, Zuo ZP, Guo C, Yuan Y, Zhuang AY |
710 - 717 |
Nano-adhesion influenced by atomic-scale asperities: A molecular dynamics simulation study Si LN, Wang XL |
718 - 723 |
Theoretical study of heavy metal Cd, Cu, Hg, and Ni(II) adsorption on the kaolinite(001) surface Zhao J, He MC |
724 - 729 |
Uniform surface modification of diatomaceous earth with amorphous manganese oxide and its adsorption characteristics for lead ions Li S, Li DY, Su F, Ren YP, Qin GW |
730 - 736 |
Preparation, and characterizations of a novel luminescence Lu2WO6:Eu3+ film as potential scintillator Chen XY, Zhang ZJ, Zhu LL, Xu M, Wang H, Li AG, Zhao JT |
737 - 744 |
Surface modification of carbon fibers by a polyether sulfone emulsion sizing for increased interfacial adhesion with polyether sulfone Yuan HJ, Zhang SC, Lu CX |
745 - 751 |
Defect formation in single layer graphene under extreme ultraviolet irradiation Gao A, Zoethout E, Sturm JM, Lee CJ, Bijkerk F |
752 - 759 |
Density functional theory study on the interaction of CO with the Fe3O4(001) surface Xue PY, Fu ZM, Chu XL, Zhang YX, Yang ZX |
760 - 764 |
Influence of ion/atom arrival ratio on structure and optical properties of AlN films by ion beam assisted deposition Meng JP, Fu ZQ, Liu XP, Yue W, Wang CB |
765 - 770 |
Ni2O3 decoration of In2O3 nanostructures for catalytically enhanced methane sensing Vuong NM, Hieu NM, Kim D, Choi BI, Kim M |
771 - 775 |
Investigation on surface structure of potassium permanganate/nitric acid treated poly(tetrafluoroethylene) Fu CL, Liu SL, Gong TL, Gu AQ, Yu ZL |
776 - 786 |
Covalent co-immobilization of heparin/laminin complex that with different concentration ratio on titanium surface for selectively direction of platelets and vascular cells behavior Wang J, Chen Y, Liu T, Wang X, Liu Y, Wang Y, Chen JY, Huang N |
787 - 793 |
Synthesis of P (St-DVB)/Fe3O4 microspheres and application for oil removal in aqueous environment Mao JY, Jiang W, Gu JJ, Zhou S, Lu Y, Xie T |
794 - 802 |
A role of nanotube dangling pyrrole and oxygen functions in the electrochemical synthesis of polypyrrole/MWCNTs hybrid materials Krukiewicz K, Herman AP, Turczyn R, Szymanska K, Koziol KKK, Boncel S, Zak JK |
803 - 810 |
Bias voltage dependence of molecular orientation of dialkyl ketone and fatty acid alkyl ester at the liquid-graphite interface Hibino M, Tsuchiya H |
811 - 817 |
High-fluence hyperthermal ion irradiation of gallium nitride surfaces at elevated temperatures Finzel A, Gerlach JW, Lorbeer J, Frost F, Rauschenbach B |
818 - 827 |
Polyamide-thallium selenide composite materials via temperature and pH controlled adsorption-diffusion method Ivanauskas R, Samardokas L, Mikolajunas M, Virzonis D, Baltrusaitis J |
828 - 832 |
Effects of ultrathin AlAs interfacial layer on the structure and optical properties of GaInP epilayer grown on germanium Jia SP, Chen GF, He W, Dai P, Chen JX, Lu SL, Yang H |
833 - 838 |
Ag3PO4/TiO2 composite for efficient photodegradation of organic pollutants under visible light Zhao FM, Pan L, Wang SW, Deng QY, Zou JJ, Wang L, Zhang XW |
839 - 855 |
Effects of substrate preheating on the thin-wall part built by laser metal deposition shaping Zhang K, Wang SJ, Liu WJ, Long RS |
856 - 866 |
Controlling the synergetic effects in (3-aminopropyl) trimethoxysilane and (3-mercaptopropyl) trimethoxysilane coadsorption on stainless steel surfaces Vuori L, Hannula M, Lahtonen K, Jussila P, Ali-Loytty H, Hirsimaki M, Parna R, Nommiste E, Valden M |
867 - 874 |
Effect of direct current density on microstructure of tungsten coating electroplated from Na2WO4-WO3-NaPO3 system Jiang F, Zhang YC, Sun NB, Liu Z |
875 - 883 |
Novel lubricated surface of titanium alloy based on porous structure and hydrophilic polymer brushes Wang K, Xiong DS, Niu YX |
884 - 891 |
A novel coating onto LiMn2O4 cathode with increased lithium ion battery performance Zeng JS, Li MS, Li XF, Chen C, Xiong DB, Dong LT, Li DJ, Lushington A, Sun XL |
892 - 901 |
A comparative investigation on catalytic oxidation of CO, benzene, and toluene over birnessites derived from different routes Ye Q, Lu H, Zhao J, Cheng SY, Kang TF, Wang D, Dai HX |
902 - 907 |
Thermal and stress studies of the 30.4 nm Mo/Si multilayer mirror for the moon-based EUV camera Li YP, Zhang HJ, Wang HF, He F, Wang XD, Liu Y, Han SL, Zheng X, Wang XD, Chen B, Li HB, Chen B, Cao JL |
908 - 913 |
Interface bonding between particle and substrate during HVOF spraying Sun C, Guo L, Lu GX, Lv YB, Ye FX |
914 - 922 |
Synthesis and characterization of amoxicillin derived silver nanoparticles: Its catalytic effect on degradation of some pharmaceutical antibiotics Junejo Y, Guner A, Baykal A |
923 - 928 |
Effects of metal elements in catalytic growth of carbon nanotubes/graphene: A first principles DFT study Li JD, Croiset E, Ricardez-Sandoval L |
929 - 934 |
Surface chemical and photocatalytic consequences of Ca-doping of BiFeO3 as probed by XPS and H2O2 decomposition studies Zaki MI, Ramadan W, Katrib A, Rabee AIM |
935 - 939 |
Structural evolution of yttrium nanolayer inserted in FeNi/Y nanomultilayered film Li W, Liu P, Zhang K, Ma FC, Liu XK, Chen XH, He DH |
940 - 945 |
Detection of explosives by surface enhanced Raman scattering using substrate with a monolayer of ordered Au nanoparticles Chen TF, Lu SH, Wang AJ, Zheng D, Wu ZL, Wang YS |
946 - 954 |
Optimizing production of hydroxyapatite from alkaline residue for removal of Pb2+ from wastewater Yan YB, Wang YP, Sun XY, Li JS, Shen JY, Han WQ, Liu XD, Wang LJ |
955 - 961 |
Surface characterization studies of CuO-CeO2-ZrO2 catalysts for selective catalytic reduction of NO with NH3 Zhang QL, Xu LS, Ning P, Gu JJ, Guan QQ |
962 - 969 |
Effect of surface nanostructuring of aluminum alloy on post plasma electrolytic oxidation Masiha HR, Bagheri HR, Gheytani M, Aliofkhazraei M, Rouhaghdam AS, Shahrabi T |
970 - 973 |
Humidity sensing properties of morphology-controlled ordered silicon nanopillar Li W, Hu MY, Ge PP, Wang J, Guo YY |
974 - 981 |
Effect of titanium nitride/titanium coatings on the stress corrosion of nickel-titanium orthodontic archwires in artificial saliva Liu JK, Liu IH, Liu C, Chang CJ, Kung KC, Liu YT, Lee TM, Jou JL |
982 - 985 |
Impacts of Au-doping on the performance of Cu/HfO2/Pt RRAM devices Tan TT, Guo TT, Chen X, Li XJ, Liu ZT |
986 - 993 |
Sputtered titanium oxynitride coatings for endosseous applications: Physical and chemical evaluation and first bioactivity assays Banakh O, Moussa M, Matthey J, Pontearso A, Cattani-Lorente M, Sanjines R, Fontana P, Wiskott A, Durual S |
994 - 999 |
Band alignment studies of Al2O3/CuGaO2 and ZnO/CuGaO2 hetero-structures grown by pulsed laser deposition Ajimsha RS, Das AK, Joshi MP, Kukreja LM |
1000 - 1003 |
Preparation and characterization of high-transmittance AZO films using RF magnetron sputtering at room temperature Chen J, Sun YH, Lv X, Li DR, Fang L, Wang HL, Sun XH, Huang CH, Yu HZ, Feng P |
1004 - 1009 |
Multi- and few-layer graphene on insulating substrate via pulsed laser deposition technique Kumar I, Khare A |
1010 - 1014 |
Low fraction of hexagonal inclusions in thick and bulk cubic GaN layers Waheeda SN, Zainal N, Hassan Z, Novikov SV, Akimov AV, Kent AJ |
1015 - 1021 |
Effect of pH on the synthesis and characteristics of RGO-CdS nanocomposites Johra FT, Jung WG |
1022 - 1027 |
Characterization of interface and border traps in ALD Al2O3/GaN MOS capacitors with two-step surface pretreatments on Ga-polar GaN Gu S, Chagarov EA, Min J, Madisetti S, Novak S, Oktyabrsky S, Kerr AJ, Kaufman-Osborn T, Kummel AC, Asbeck PM |
1028 - 1034 |
One-step synthesis of water-dispersible cysteine functionalized magnetic Fe3O4 nanoparticles for mercury(II) removal from aqueous solutions Shen XF, Wang Q, Chen WL, Pang YH |
1035 - 1040 |
Preparation and characterization of heat-assisted PbS/TiO2 thin films Xu YY, Zhang M, Lv JG, Zhang MC, Jiang XS, Song XP, He G, Sun ZQ |
1041 - 1046 |
Plasmonic properties of silver nanoparticles embedded in diamond like carbon films: Influence of structure and composition Meskinis S, Ciegis A, Vasiliauskas A, Tamuleviciene A, Slapikas K, Juskenas R, Niaura G, Tamulevicius S |
1047 - 1051 |
Step-by-step self-assembly of manganese phthalocyanine on Bi(111) surface: From single molecule to two-dimensional domains Zhang TT, Wang CJ, Sun K, Yuan HK, Wang JZ |
1052 - 1059 |
Synthesis of green nano iron particles (GnIP) and their application in adsorptive removal of As(III) and As(V) from aqueous solution Prasad KS, Gandhi P, Selvaraj K |
1060 - 1067 |
Lewis basicity, adhesion thermodynamic work and coordinating ability on aminated silicon surfaces Sanchez MA, Paniagua SA, Borge I, Viales C, Montero ML |
1068 - 1074 |
Topographical length scales of hierarchical superhydrophobic surfaces Dhillon PK, Brown PS, Bain CD, Badyal JPS, Sarkar S |
1075 - 1079 |
Influence of thermal annealing and ion irradiation on zinc silicate phases in nanocomposite ZnO-SiOx thin films Valiveti VSK, Singh F, Ojha S, Kanjilal D |
1080 - 1089 |
Deposition of nano Fe3O4@mZrO(2) onto exfoliated graphite oxide sheets and its application for removal of amaranth Jiang HL, Chen PH, Zhang WB, Luo SL, Luo XB, Au CT, Li ML |
1090 - 1099 |
Preparation and characterization of bioactive and degradable composites containing ordered mesoporous calcium-magnesium silicate and poly(L-lactide) Ji JJ, Dong XP, Ma XH, Tang SC, Wu ZY, Xia J, Wang QX, Wang YT, Wei J |
1100 - 1106 |
Synthesis of chemical vapor deposition graphene on tantalum wire for supercapacitor applications Li MJ, Guo WL, Li HJ, Xu S, Qu CQ, Yang BH |
1107 - 1112 |
Low temperature self-cleaning properties of superhydrophobic surfaces Wang FJ, Shen TH, Li CQ, Li W, Yan GL |
1113 - 1124 |
Structure of anodized Al-Zr sputter deposited coatings and effect on optical appearance Gudla VC, Canulescu S, Shabadi R, Rechendorff K, Dirscherl K, Ambat R |
1125 - 1130 |
Magnetic solid base catalyst CaO/CoFe2O4 for biodiesel production: Influence of basicity and wettability of the catalyst in catalytic performance Zhang PB, Han QJ, Fan MM, Jiang PP |
1131 - 1142 |
Visible light photoactivity of TiO2 loaded with monometallic (Au or Pt) and bimetallic (Au/Pt) nanoparticles Golabiewska A, Lisowski W, Jarek M, Nowaczyk G, Zielinska-Jurek A, Zaleska A |
1143 - 1150 |
Study of the corrosion behavior and the corrosion films formed on the surfaces of Mg-xSn alloys in 3.5 wt.% NaCl solution Wang JF, Li Y, Huang S, Zhou XE |