1 - 8 |
Surface chemical structure and doping characteristics of boron-doped Si nanowires fabricated by plasma doping Oh SH, Ma JW, Bae JM, Kang YS, Ahn JP, Kang HK, Chae J, Suh D, Song W, Kim S, Cho MH |
9 - 15 |
Interaction of alcohols on monolayer stanane nanosheet: A first-principles investigation Nagarajan V, Chandiramouli R |
16 - 23 |
Antimicrobial cotton textiles with robust superhydrophobicity via plasma for oily water separation Zhang M, Pang JY, Bao WH, Zhang WB, Gao H, Wang CY, Shi JY, Li J |
24 - 34 |
Preparation and tribological properties of MoS2/graphene oxide composites Song HJ, Wang BA, Zhou QA, Xiao JX, Jia XH |
35 - 44 |
Facile preparation of MoS2 based polymer composites via mussel inspired chemistry and their high efficiency for removal of organic dyes Huang QA, Liu MY, Chen JY, Wan Q, Tian JW, Huang L, Jiang RM, Wen YQ, Zhang XY, Wei Y |
45 - 51 |
Structures and stabilities of small Co clusters on a Cu(111) surface: A theoretical study Huang RZ, Chen C, Li CM, Jiang CH, Zhang RJ, Gao Y |
52 - 62 |
Modelling the impact, spreading and freezing of a water droplet on horizontal and inclined superhydrophobic cooled surfaces Yao Y, Li C, Zhang H, Yang R |
63 - 69 |
Novel transparent conductor with enhanced conductivity: hybrid of silver nanowires and dual-doped graphene Sohn H, Woo YS, Shin W, Yun DJ, Lee T, Kim FS, Hwang J |
70 - 83 |
Fabrication and investigation of MnFe2O4/MWCNTs nanocomposite by hydrothermal technique and adsorption of cationic and anionic dyes Kafshgari LA, Ghorbani M, Azizi A |
84 - 90 |
Excellent ammonia sensing performance of gas sensor based on graphene/titanium dioxide hybrid with improved morphology Ye ZB, Tai HL, Guo R, Yuan Z, Liu CH, Su YJ, Chen Z, Jiang YD |
91 - 97 |
Atom redistribution and multilayer structure in NiTi shape memory alloy induced by high energy proton irradiation Wang HZ, Yi XY, Zhu YY, Yin YK, Gao Y, Cai W, Gao ZY |
98 - 106 |
Active and efficient Co-N/C catalysts derived from cobalt porphyrin for selective oxidation of alkylaromatics Chen Y, Jie SS, Yang CQ, Liu ZG |
107 - 113 |
Initial and steady-state Ru growth by atomic layer deposition studied by in situ Angle Resolved X-ray Photoelectron Spectroscopy Egorov KV, Lebedinskii YY, Soloviev AA, Chouprik AA, Azarov AY, Markeev AM |
114 - 125 |
A theoretical study on the role of water and its derivatives in acetic acid steam reforming on Ni(111) Du ZY, Ran YX, Guo YP, Feng J, Li WY |
126 - 137 |
Characterization of SrTiO3 target doped with Co ions, SrCoxTi1-xO3-delta, and their thin films prepared by pulsed laser ablation (PLA) in water for visible light response Ichihara F, Murata Y, Ono H, Choo CK, Tanaka K |
138 - 149 |
Effect of graphene oxide and fluorinated polymeric chains incorporated in a multilayered sol-gel nanocoating for the design of corrosion resistant and hydrophobic surfaces Maeztu JD, Rivero PJ, Berlanga C, Bastidas DM, Palacio JF, Rodriguez R |
150 - 158 |
Mechanism of surface morphology in electron beam melting of Ti6Al4V based on computational flow patterns Ge W, Han S, Fang YC, Cheon J, Na SJ |
159 - 164 |
Enhanced visible-light photocatalytic activity of ZnS/g-C3N4 type-II heterojunction nanocomposites synthesized with atomic layer deposition Kim WJ, Jang E, Park TJ |
165 - 176 |
Electrochemical synthesis of three-dimensional porous networks of nickel with different micro-nano structures for the fabrication of Ni/MnOx nanocomposites with enhanced supercapacitive performance Ashassi-Sorkhabi H, Badakhshan PL |
177 - 187 |
Surface modification of polyamide reverse osmosis membrane with sulfonated polyvinyl alcohol for antifouling Zhang Y, Wan Y, Pan GY, Shi HW, Yan H, Xu J, Guo M, Wang Z, Liu YQ |
188 - 196 |
Surface grafting of zwitterionic polymers onto dye doped AIE-active luminescent silica nanoparticles through surface-initiated ATRP for biological imaging applications Mao LC, Liu XH, Liu MY, Huang L, Xu DZ, Jiang RM, Huang Q, Wen YQ, Zhang XY, Wei Y |
197 - 205 |
Anticorrosion performance of chromized coating prepared by pack cementation in simulated solution with H2S and CO2 Wang QY, Behnamian Y, Luo H, Wang XZ, Leitch M, Zeng H, Luo JL |
206 - 212 |
Improving pH sensitivity by field-induced charge regulation in flexible biopolymer electrolyte gated oxide transistors Liu N, Gan L, Liu Y, Gui WJ, Li W, Zhang XH |
213 - 223 |
Hydrophobic surface modification of TiO2 nanoparticles for production of acrylonitrile-styrene-acrylate terpolymer/TiO2 composited cool materials Qi YL, Xiang B, Tan WB, Zhang J |
224 - 234 |
Plasma treated polyethylene terephthalate for increased embedment of UV-responsive microcapsules Gorjanc M, Mozetic M, Primc G, Vesel A, Spasic K, Puac N, Petrovic ZL, Kert M |
235 - 240 |
Chemical modification of TiO2 nanotube arrays for label-free optical biosensing applications Terracciano M, Galstyan V, Rea I, Casalino M, De Stefano L, Sbervegleri G |
241 - 251 |
Experimental investigation and DFT calculation of different amine/ammonium salts adsorption on kaolinite Chen J, Min FF, Liu LY, Liu CF, Lu FQ |
252 - 258 |
Work function engineering of graphene oxide via covalent functionalization for organic field-effect transistors Ji S, Min BK, Kim SK, Myung S, Kang M, Shin HS, Song W, Heo J, Lim J, An KS, Lee IY, Lee SS |
259 - 268 |
Improving amphiphilic polypropylenes by grafting poly(vinylpyrrolidone) and poly(ethylene glycol) methacrylate segments on a polypropylene microporous membrane Chen HR, Ma WZ, Xia YP, Gu Y, Cao Z, Liu CL, Yang HC, Tao SX, Geng HR, Tao GL, Matsuyama H |
269 - 276 |
Improving photo-stability and charge transport properties of Cu2O/CuO for photo-electrochemical water splitting using alternate layers of WO3 or CuWO4 produced by the same route Jamali S, Moshaii A |
277 - 285 |
Flexible freestanding sandwich type ZnO/rGO/ZnO electrode for wearable supercapacitor Ghorbani M, Golobostanfard MR, Abdizadeh H |
286 - 293 |
Structural, electronic and magnetic properties of the MnGa(111)-1 x 2 and 2 x 2 reconstructions: Spin polarized first principles total energy calculations Garcia-Diaz R, Cocoletzi GH, Mandru AO, Wang KK, Smith AR, Takeuchi N |
294 - 304 |
Logarithmic contact time dependence of adhesion force and its dominant role among the effects of AFM experimental parameters under low humidity Lai TM, Meng YG |
305 - 310 |
Reversible, long-term passivation of Ge(001) by a Ba-induced incorporated phase Koczorowski W, Grzela T, Puchalska A, Jurczyszyn L, Czajka R, Radny MW |
311 - 318 |
Depth resolved compositional analysis of aluminium oxide thin film using non-destructive soft x-ray reflectivity technique Sinha M, Modi MH |
319 - 327 |
Solid state direct bonding of polymers by vacuum ultraviolet light below 160 nm Hashimoto Y, Yamamoto T |
328 - 336 |
Stabilized super-thermite colloids: A new generation of advanced highly energetic materials Elbasuney S, Zaky MG, Radwan M, Mostafa SF |
337 - 341 |
Investigation on depth resolved compositions of e-beam deposited ZrO2 thin film Singh A, Sinha M, Gupta RK, Modi MH |
342 - 347 |
Preparation of hydrophobic polyvinyl alcohol aerogel via the surface modification of boron nitride for environmental remediation Zhang RY, Wan WC, Qiu LJ, Wang YH, Zhou Y |
348 - 356 |
Effect of surface treatments on physicomechanical, stain-resist, and UV protection properties of wool fabrics Hassan MM, Leighs SJ |
357 - 364 |
Room-temperature aqueous plasma electrolyzing Al2O3 nano-coating on carbon fiber Zhang YP, Meng Y, Shen YH, Chen WW, Cheng HW, Wang L |
365 - 372 |
Naturally formed ultrathin V2O5 heteroepitaxial layer on VO2/sapphire(001) film Littlejohn AJ, Yang YB, Lu ZH, Shin E, Pan KC, Subramanyam G, Vasilyev V, Leedy K, Quach T, Lu TM, Wang GC |
373 - 381 |
Controllable SERS performance for the flexible paper-like films of reduced graphene oxide Yan TT, Zhang LL, Jiang TT, Bai ZM, Yu XX, Dai P, Wu MZ |
382 - 392 |
Effect of Si/Al ratio on catalytic performance of hydrothermally aged Cu-SSZ-13 for the NH3-SCR of NO in simulated diesel exhaust Han S, Cheng J, Zheng CK, Ye Q, Cheng SY, Kang TF, Dai HX |
393 - 398 |
The synthesis and protein resistance of amphiphilic PDMS-b-(PDMS-g-cysteine) copolymers Lei YF, Lin YL, Zhang AQ |
399 - 408 |
Effects of Nd-, Pr-, Tb- and Y-doping on the structural, textural, electrical and N2O decomposition activity of mesoporous NiO nanoparticles Abu-Zied BM, Bawaked SM, Kosa SA, Ali TT, Schwieger W, Aqlan FM |
409 - 417 |
Fabrication of TiO2 nanorods/nanosheets photoelectrode on Ti mesh by hydrothermal method for degradation of methylene blue:influence of calcination temperature Deng XY, Ma QL, Cui YQ, Cheng XW, Cheng QF |
418 - 428 |
Reduced graphene oxide-NH2 modified low pressure nanofiltration composite hollow fiber membranes with improved water flux and antifouling capabilities Li XP, Zhao CW, Yang M, Yang B, Hou DY, Wang T |
429 - 438 |
Fabrication of PVDF-based blend membrane with a thin hydrophilic deposition layer and a network structure supporting layer via the thermally induced phase separation followed by non-solvent induced phase separation process Wu ZG, Cui ZY, Li TY, Qin SH, He BQ, Han N, Li JX |
439 - 446 |
Work function modifications of graphite surface via oxygen plasma treatment Duch J, Kubisiak P, Adolfsson KH, Hakkarainen M, Golda-Cepa M, Kotarba A |
447 - 453 |
Titanium conversion coatings on the aluminum foil AA 8021 used for lithium-ion battery package Xia XF, Gu YY, Xu SA |
454 - 459 |
Aluminum surface modification with fluoroalkyl methacrylate-based copolymers to attain superhydrophobic properties Bryuzgin EV, Klimov VV, Repin SA, Navrotskiy AV, Novakov IA |
460 - 464 |
Annealing tunes interlayer coupling and optoelectronic property of bilayer SnSe2/MoSe2 heterostructures Chen P, Shang JM, Yang Y, Wang RM, Cheng XR |
465 - 475 |
Comparative study of electroless Co-Ni-P plating on Tencel fabric by Co-0-based and Ni-0-based activation for electromagnetic interference shielding Bi SY, Zhao H, Hou L, Lu YX |
476 - 483 |
Red-luminescence band: A tool for the quality assessment of germanium and silicon nanocrystals Fraj I, Favre L, David T, Abbarchi M, Liu K, Claude JB, Ronda A, Naffouti M, Saidi F, Hassen F, Maaref H, Aqua JN, Berbezier I |
484 - 496 |
Prediction of two-dimensional d-block elemental materials with normal honeycomb, triangular-dodecagonal, and square-octagonal structures from first principles Zhou BZ, Dong SJ, Wang XC, Zhang KL |
497 - 502 |
Photocatalytic C-60-amorphous TiO2 composites prepared by atomic layer deposition Justh N, Firkala T, Laszlo K, Labar J, Szilagyi IM |
503 - 511 |
Calcium phosphorus bio-coating on carbon/carbon composites: Preparation, shear strength and bioactivity Su YY, Li KZ, Zhang LL, Liu SJ, Yuan Y, He S |
512 - 521 |
Critical temperature determination of detectable Cr diffusion enhancement by nanostructure through structural evolution analysis of the oxide films at 25-450 degrees C on 304 stainless steel Gui Y, Meng XB, Zheng ZJ, Gao Y |
522 - 530 |
First-principles investigations of metal (V, Nb, Ta)-doped monolayer MoS2: Structural stability, electronic properties and adsorption of gas molecules Zhu J, Zhang H, Tong YW, Zhao L, Zhang YF, Qiu YZ, Lin XN |
531 - 539 |
Research on the biological activity and doxorubicin release behavior in vitro of mesoporous bioactive SiO2-CaO-P2O5 glass nanospheres Wang X, Wang G, Zhang Y |
540 - 545 |
Graphene for amino acid biosensing: Theoretical study of the electronic transport Rodriguez SJ, Makinistian L, Albanesi EA |
546 - 556 |
Tethering of hyperbranched polyols using PEI as a building block to synthesize antifouling PVDF membranes Wang XS, Wang ZH, Wang Z, Cao Y, Meng JQ |
557 - 563 |
Molecular dynamics simulation of siderite-hematite-quartz flotation with sodium oleate Li LX, Hao HQ, Yuan ZT, Liu JT |
564 - 572 |
Controlling the grain size of polycrystalline TiO2 films grown by atomic layer deposition Piltaver IK, Peter R, Saric I, Salamon K, Badovinac IJ, Koshmak K, Nannarone S, Marion ID, Petravic M |
573 - 579 |
CO2-Induced Defect Engineering: A New Protocol by Doping Vacancies in 2D Heterostructures for Enhanced Visible-Light Photocatalysis Ren YM, Wang CZ, Qi YH, Chen ZM, Jia Y, Xu Q |
580 - 585 |
Polydopamine and MnO2 core-shell composites for high-performance supercapacitors Hou D, Tao HS, Zhu XZ, Li MG |
586 - 594 |
A facile route to the synthesis of magnetically separable BiOBr/NiFe2O4 composites with enhanced photocatalytic performance Li XW, Wang L, Zhang L, Zhuo SP |
595 - 602 |
Characterization of the interface between highly conductive Ga:ZnO films and the silicon substrate Gabas M, Ochoa-Martinez E, Navarrete-Astorga E, Landa-Canovas AR, Herrero P, Agullo-Rueda F, Palanco S, Martinez-Serrano JJ, Ramos-Barrado JR |
603 - 613 |
Droplet distribution during sub-picosecond laser deposition of gold nanoparticles Gontad F, Cesaria M, Klini A, Manousaki A, Perrone A, Caricato AP |
614 - 623 |
Ag/AgCl decorated Bi4Ti3O12 nanosheet with highly exposed (001) facets for enhanced photocatalytic degradation of Rhodamine B, Carbamazepine and Tetracycline Shi BT, Yin HY, Gong JY, Nie QL |
624 - 630 |
Enhanced performance of NiMoO4 nanoparticles and quantum dots and reduced nanohole graphene oxide hybrid for supercapacitor applications Lv JL, Yang M, Liang TX |
631 - 636 |
The influence of preparation conditions on structural evolution and electrochemical properties of sputtered LiNi0.5Mn1.5O4 thin film electrodes Lv SS, Li ZC, Luo XY |
637 - 641 |
Degradation pattern of black phosphorus multilayer field-effect transistors in ambient conditions: Strategy for contact resistance engineering in BP transistors Lee BC, Kim CM, Jang HK, Lee JW, Joo MK, Kim GT |
642 - 649 |
Surface modification of silicon wafer by grafting zwitterionic polymers to improve its antifouling property Sun YL, Chen CL, Xu H, Lei K, Xu GZ, Zhao L, Lang MD |
650 - 669 |
Corrosion protection properties and interfacial adhesion mechanism of an epoxy/polyamide coating applied on the steel surface decorated with cerium oxide nanofilm: Complementary experimental, molecular dynamics (MD) and first principle quantum mechanics (QM) simulation methods Bahlakeh G, Ramezanzadeh B, Saeb MR, Terryn H, Ghaffari M |
670 - 677 |
Facile Synthesis of NiCo2O4/Carbon Black Composite as Counter Electrode for Dye-Sensitized Solar Cells Wang YN, Fu NQ, Ma P, Fang YY, Peng LM, Zhou XW, Lin Y |
678 - 682 |
Enhanced carbon tolerance on Ni-based reforming catalyst with Ir alloying: A DFT study Ahn K, Choi S, Lee JH, Kim BK, Kim J, Kim H |
683 - 691 |
Synthesis of polysiloxane with quaternized N-halamine moieties for antibacterial coating of polypropylene via supercritical impregnation technique Chen Y, Yu PW, Feng CY, Wang YY, Han QX, Zhang Q |
692 - 696 |
Self-assembled thin films of Fe3O4-Ag composite nanoparticles for spintronic applications Jiang CP, Leung CW, Pong PWT |
697 - 707 |
Promotional effects of Titanium additive on the surface properties, active sites and catalytic activity of W/CeZrOx monolithic catalyst for the selective catalytic reduction of NOx with NH3 Xu HD, Feng X, Liu S, Wang Y, Sun MM, Wang JL, Chen YQ |
708 - 712 |
Functionalized carbon nitride (g-CN) monolayer as a promising energy storage material: A density functional theory study Hussain T, Kaewmaraya T, Hankel M, Amornkitbamrung V |
713 - 719 |
Adsorption of non-ionic ABC triblock copolymers: Surface modification of TiO2 suspensions in aqueous and non-aqueous medium Lerch JP, Atanase LI, Riess G |
720 - 732 |
Phase modification and morphological evolution in Nb2O5 thin films and its influence in dye- sensitized solar cells Suresh S, Unni GE, Ni CS, Sreedharan RS, Krishnan RR, Satyanarayana M, Shanmugam M, Pillai VPM |
733 - 743 |
In situ DRIFTS studies on CuO-Fe2O3 catalysts for low temperature selective catalytic oxidation of ammonia to nitrogen Zhang QL, Wang HM, Ning P, Song ZX, Liu X, Duan YK |
744 - 752 |
Synthesis and characterization of hydrophobic amino-based polyphosphazene microspheres with different morphologies via two strategies Wei X, Zhang GC, Zhou LS, Li JW |
753 - 757 |
A novel wet coating method using small amounts of solution on large flat substrates Mousavi SH, Jilavi MH, May A, Schmitt KP, Schafer B, de Oliveira PW |
758 - 763 |
Thermal atomic layer deposition of In2O3 thin films using dimethyl(N-ethoxy-2,2-dimethylcarboxylicpropanamide)indium and H2O Agbenyeke RE, Jung EA, Park BK, Chung TM, Kim CG, Han JH |
764 - 769 |
Pulsed laser deposition of tin oxide thin films for field emission Jadhav H, Suryawanshi S, More MA, Sinha S |
770 - 777 |
Tuning the degree of oxidation and electron delocalization of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) with solid-electrolyte Vempati S, Ertas Y, Celebioglu A, Uyar T |
778 - 787 |
Formation of aggregated nanoparticle spheres through femtosecond laser surface processing Tsubaki AT, Koten MA, Lucis MJ, Zuhlke C, Ianno N, Shield JE, Alexander DR |
788 - 794 |
Improving carbon tolerance of Ni-YSZ catalytic porous membrane by palladium addition for low temperature steam methane reforming Lee SM, Won JM, Kim GJ, Lee SH, Kim SS, Hong SC |
795 - 801 |
The effect of the oxygen ratio control of DC reactive magnetron sputtering on as-deposited non stoichiometric NiO thin films Wang MY, Thimont Y, Presmanes L, Diao XG, Barnabe A |
802 - 810 |
Adsorption characteristic of Pd-4 cluster carbon nanotube towards transformer oil dissolved components: A simulation Zhang XX, Cui H, Zhang J, Tang J |
811 - 816 |
Structural and electronic properties of low-index surfaces of NbAl3 intermetallic with first-principles calculations Jiao Z, Liu QJ, Liu FS, Tan B |
817 - 825 |
Comparison of nitrogen adsorption and transmission electron microscopy analyses for structural characterization of carbon nanotubes Abbaslou RM, Vosoughi V, Dalai AK |
826 - 837 |
Phytic acid doped polyaniline containing epoxy coatings for corrosion protection of Q235 carbon steel Hao YS, Sani LA, Ge TJ, Fang QH |
838 - 846 |
Pd-catalysts for DFAFC prepared by magnetron sputtering Bieloshapka I, Jiricek P, Vorokhta M, Tomsik E, Rednyk A, Perekrestov R, Jurek K, Ukraintsev E, Hruska K, Romanyuk O, Lesiak B |
847 - 859 |
Influence of ethanol vapor addition on the surface modification of polyethylene in a dielectric barrier discharge Van Deynse A, Morent R, Leys C, De Geyter N |
860 - 868 |
Surface science in hernioplasty: The role of plasma treatments Nistico R, Magnacca G, Martorana S |
869 - 874 |
Multifunctional walnut shell layer used for oil/water mixtures separation and dyes adsorption Li J, Zhao ZH, Li DM, Tang XH, Feng H, Qi W, Wang Q |
875 - 885 |
Photo-induced CO2 reduction by CH4/H2O to fuels over Cu-modified g-C3N4 nanorods under simulated solar energy Tahir B, Tahir M, Amin NAS |
886 - 892 |
Hierarchically 3D assembled strontium titanate nanomaterials for water splitting application Moniruddin M, Afroz K, Shabdan Y, Bizri B, Nuraje N |
893 - 900 |
Formation of hierarchical porous graphene films with defects using a nanosecond laser on polyimide sheet Wang FC, Wang KD, Dong X, Mei XS, Zhai ZY, Zheng BX, Lv J, Duan WQ, Wang WJ |
901 - 915 |
The influence of Ti additions on the mechanical and electrochemical behavior of beta-Ta5Si3 nanocrystalline coating Xu J, Cheng J, Jiang SY, Munroe P, Xie ZH |
916 - 923 |
Amperometric L-lysine biosensor based on carboxylated multiwalled carbon nanotubes-SnO2 nanoparticles-graphene composite Kacar C, Erden PE, Kilic E |
924 - 932 |
Ab initio study of magnetism and interaction of graphene with the polar MnO(111) surface Ilyasov VV, Popova IG, Ershov IV |
933 - 941 |
Photoelectrochemical response and corrosion behavior of CdS/TiO2 nanocomposite films in an aerated 0.5 M NaCl solution Boonserm A, Kruehong C, Seithtanabutara V, Artnaseaw A, Kwakhong P |
942 - 956 |
Optical characterization of randomly microrough surfaces covered with very thin overlayers using effective medium approximation and Rayleigh-Rice theory Ohlidal I, Vohanka J, Cermak M, Franta D |
957 - 967 |
Role of surface energy on the morphology and optical properties of GaP micro & nano structures grown on polar and non-polar substrates Roychowdhury R, Kumar S, Wadikar A, Mukherjee C, Rajiv K, Sharma TK, Dixit VK |