| 1 - 9 |
The response surface optimization of steryl glucosides removal in palm biodiesel using silica adsorption
Saeong P, Saisriyoot M, Thanapimmetha A, Srinophakun P |
| 10 - 24 |
Investigation of deposit effect on multi-hole injector spray characteristics and air/fuel mixing process
Wang B, Badawy T, Jiang YZ, Xu HM, Ghafourian A, Zhang XY |
| 25 - 35 |
Modelling of spray and combustion processes by using the Eulerian multiphase approach and detailed chemical kinetics
Petranovic Z, Edelbauer W, Vujanovic M, Duic N |
| 36 - 45 |
LES of Delft Jet-in-Hot Coflow burner to investigate the effect of preferential diffusion on autoignition of CH4/H-2 flames
Abtahizadeh E, de Goey P, van Oijen J |
| 46 - 53 |
Development of cylindrical laminated methanol steam reforming microreactor with cascading metal foams as catalyst support
Zhou W, Ke YZ, Wang QH, Wan SL, Lin JD, Zhang JP, Hui KS |
| 54 - 61 |
Synthesis, characterization and application of some non-halogen ionic liquids as green solvents for deep desulfurization of diesel oil
Bui TTL, Nguyen DD, Ho SV, Nguyen BT, Uong HTN |
| 62 - 76 |
Comparative study on chemical kinetic schemes for dual-fuel combustion of n-dodecane/methane blends
Masouleh MG, Wehrfritz A, Kaario O, Kahila H, Vuorinen V |
| 77 - 86 |
High temperature ignition delay time of DME/n-pentane mixture under fuel lean condition
Jiang X, Deng FQ, Yang FY, Zhang YJ, Huang ZH |
| 87 - 96 |
Viscosity of shale gas
Tran H, Sakhaee-Pour A |
| 97 - 105 |
Spray development and droplet characteristics of high temperature single-hole gasoline spray
Liu Y, Pei YQ, Peng ZJ, Qin J, Zhang Y, Ren Y, Zhang M |
| 106 - 113 |
Study on the wax/asphaltene aggregation with diffusion limited aggregation model
Sun WY, Wang W, Gu YQ, Xu XX, Gong J |
| 114 - 129 |
Optimization of the Eddy Dissipation Concept (EDC) model for turbulence-chemistry interactions under hot diluted combustion of CH4/H-2
Mardani A |
| 130 - 139 |
Effect of different sulphur-based crosslink networks on the nitrile rubber resistance to biodiesel
Linhares FN, Kersch M, Niebergall U, Leite MCAM, Atlstadt V, Furtado CRG |
| 140 - 149 |
Cellulose, xylan and lignin interactions during pyrolysis of lignocellulosic biomass
Yu J, Paterson N, Blamey J, Millan M |
| 150 - 163 |
The impact of methanol injecting position on cylinder-to-cylinder variation in a diesel methanol dual fuel engine
Chen ZF, Yao CD, Yao AR, Dou ZC, Wang B, Wei HY, Liu MJ, Chen C, Shi JJ |
| 164 - 169 |
Re-express hydrothermal liquefaction bio-crude in petroleum way
Fu S, Yang J, Shi M, Wei DM, Yin H, Sun JS, He J |
| 170 - 175 |
Ultrasonic attenuation and sound velocity assessment for mixtures of gasoline and organic compounds
Figueiredo MKK, Alvarenga AV, Costa-Felix RPB |
| 176 - 189 |
Thermal auto-ignition in high-speed droplet-laden mixing layers
Ren ZX, Wang B, Xie QF, Wang DL |
| 190 - 197 |
Experimental assessment of a diesel engine fueled with diesel-biodiesel-1-pentanol blends
Yilmaz N, Atmanli A |
| 198 - 203 |
Improved sodium adsorption by modified kaolinite at high temperature using intercalation-exfoliation method
Zhang XJ, Liu H, Xing HX, Li HY, Hu HY, Li AJ, Yao H |
| 204 - 211 |
Effect of C9H12 alkylbenzenes on particle formation in diffusion flames: An experimental study
Conturso M, Sirignano M, D'Anna A |
| 212 - 220 |
Pre-formulation of biofuels: Kinematic viscosities, low-temperature phase behaviour and nanostructuring of ethanol/"ethanolotrope"/rapeseed oil mixtures
Khoshsima A, Brock D, Touraud D, Kunz W |
| 221 - 229 |
Reaction, crystallization and element migration in coal slag melt during isothermal molten process
Shen ZJ, Hua X, Liang QF, Xu JL, Han D, Liu HF |
| 230 - 238 |
Improvement on slurry ability of lignite under microwave irradiation
Ren YG, Zheng JP, Yang X, Xu ZQ, Cao ZH |
| 239 - 250 |
Interfacial tension of crude oil-water system with imidazolium and lactam-based ionic liquids and their evaluation for enhanced oil recovery under high saline environment
Sakthivel S, Velusamy S, Nair VC, Sharma T, Sangwai JS |
| 251 - 265 |
Characteristics of non-evaporating, evaporating and burning sprays of hydrous ethanol diesel emulsified fuels
Li T, Zhang XQ, Wang B, Guo T, Shi Q, Zheng M |
| 266 - 274 |
The use of ionic liquid pretreatment of rye straw for bioethanol production
Smuga-Kogut M, Zgorska K, Kogut T, Kukielka K, Wojdalski J, Kupczyk A, Drozdz B, Wielewska I |
| 275 - 282 |
Alternatives binary and ternary blends and its effects on stability of soybean biodiesel contaminated with metals
Comin M, de Souza ACD, Roveda AC, Yahagi SS, de Oliveira LH, Amaral MS, Silva CAA, Fiorucci AR, Gomes RS, Caires ARL, Trindade MAG |
| 283 - 289 |
Spatially resolved organic coating on clay minerals in bitumen froth revealed by atomic force microscopy adhesion mapping
Chen Q, Liu J, Thundat T, Gray MR, Liu Q |
| 290 - 299 |
Monitoring of biodiesel content and adulterant presence in methyl and ethyl biodiesels of jatropha in blends with mineral diesel using MIR spectrometry and multivariate control charts
Sitoe BV, Maquina ADV, de Santana FB, Gontijo LC, Santos DQ, Neto WB |
| 300 - 311 |
Effect of di-n-butyl ether blending with soybean-biodiesel on the near-nozzle spray characteristics
Tang CL, Guan L, Feng ZH, Zhan C, Yang K, Huang ZH |
| 312 - 321 |
Analysis of pyrolysis liquids obtained from the slow pyrolysis of a German brown coal by comprehensive gas chromatography mass spectrometry
Rathsack P |
| 322 - 329 |
An indirect method for the real-time evaluation of the fuel mass injected in small injections in Common Rail diesel engines
Ferrari A, Paolicelli F |
| 330 - 338 |
Biogenic fraction determination in fuels - Optimal parameters survey
Stojkovic I, Nikolov J, Tomic M, Micic R, Todorovic N |
| 339 - 349 |
A compact skeletal mechanism for n-dodecane with optimized semi-global low-temperature chemistry for diesel engine simulations
Yao T, Pei YJ, Zhong BJ, Som S, Lu TF, Luo KH |
| 350 - 362 |
Assessment of flame kernel propagation in partially premixed turbulent jet under different turbulence levels
Badawy T, Mansour MS |
| 363 - 370 |
Direct transesterification of Botryococcus sp catalysed by immobilized lipase: Ultrasound treatment can reduce reaction time with high yield of methyl ester
Sivaramakrishnan R, Incharoensakdi A |
| 371 - 382 |
Impacts on combustion behavior of adding nanosized metal oxide to CH3N5-Sr(NO3)(2) propellant
Zhang D, Lu S, Cao CY, Liu CC, Gong LL, Zhang HP |
| 383 - 392 |
Non-isothermal kinetic study of bituminous coal and lignite conversion in air and in argon/air mixtures
Slyusarskiy KV, Larionov KB, Osipov VI, Yankovsky SA, Gubin VE, Gromov AA |
| 393 - 402 |
Durability analysis of a single cylinder DI diesel engine operating with a non-petroleum fuel
Sharma A, Murugan S |
| 403 - 410 |
Fuel production from pyrolysis of natural and synthetic rubbers
Kan T, Strezov V, Evans T |
| 411 - 426 |
Development of a diesel-biodiesel-ethanol combined chemical scheme and analysis of reactions pathways
Alviso D, Krauch F, Roman R, Maldonado H, dos Santos RG, Rolon JC, Darabiha N |
| 427 - 441 |
Factors affecting coalbed methane (CBM) well productivity in the Shizhuangnan block of southern Qinshui basin, North China: Investigation by geophysical log, experiment and production data
Peng C, Zou CC, Zhou TN, Li K, Yang YQ, Zhang GH, Wang WW |
| 442 - 453 |
Rough-walled discrete fracture network modelling for coal characterisation
Jing Y, Armstrong RT, Mostaghimi P |
| 454 - 462 |
Experimental study on puffing characteristics of biodiesel-butanol droplet
Zhang Y, Huang RH, Wang ZW, Xu SJ, Huang S, Ma YJ |
| 463 - 471 |
Magnetic nanocatalysts of Ni0.5Zn0.5Fe2O4 doped with Cu and performance evaluation in transesterification reaction for biodiesel production
Dantas J, Leal E, Mapossa AB, Cornejo DR, Costa ACFM |
| 472 - 485 |
Catalytic consequences of cation and anion substitutions on rate and mechanism of oxidative coupling of methane over hydroxyapatite catalysts
Oh SC, Lei Y, Chen HY, Liu DX |
| 486 - 494 |
Technological aspects for underground coal gasification in steeply inclined thin coal seams at Zhongliangshan coal mine in China
Xin L, Wang ZT, Wang G, Nie W, Zhou G, Cheng WM, Xie J |
| 495 - 499 |
Response of methane production and microbial community to the enrichment of soluble microbial products in goethite-dosed anaerobic reactors
Zhu MY, Peng SC, Tao W, Wang J, Tang T, Chen TH, Yue ZB |
| 500 - 510 |
Flash boiling in a multihole G-DI injector - Effects of the fuel distillation curve
Araneo L, Donde R |
| 511 - 517 |
CrO3 supported on sargassum-based activated carbon as low temperature catalysts for the selective catalytic reduction of NO with NH3
Li SJ, Wang XX, Tan S, Shi Y, Li W |
| 518 - 527 |
Thermodynamic properties of five biofuel-relevant compounds at infinite dilution in water
Qureshi MS, Vrbka P, Dohnal V |
| 528 - 537 |
Vaporization order and burning efficiency of crude oils during in-situ burning on water
van Gelderen L, Malmquist LMV, Jomaas G |
| 538 - 554 |
Integrating comprehensive two-dimensional gas chromatography and downhole fluid analysis to validate a spill-fill sequence of reservoirs with variations of biodegradation, water washing and thermal maturity
Forsythe JC, Martin R, De Santo I, Tyndall R, Arman K, Pye J, De Nicolais N, Nelson RK, Pomerantz AE, Kenyon-Roberts S, Zuo JY, Betancourt SS, Reddy C, Peters KE, Mullins OC |
| 555 - 564 |
Optimized pressure pulse-decay method for laboratory estimation of gas permeability of sorptive reservoirs: Part 1-Background and numerical analysis
Feng RM, Liu J, Harpalani S |
| 565 - 573 |
Optimized pressure pulse-decay method for laboratory estimation of gas permeability of sorptive reservoirs: Part 2-Experimental study
Feng RM, Harpalani S, Liu J |
| 574 - 582 |
Improving the properties of high volatile coking coals by controlled mild oxidation
Vega MF, Fernandez AM, Diaz-Faes E, Barriocanal C |
