Mechanical and optical properties of electrospun nylon-6,6 nanofiber reinforced cyclic butylene terephthalate composites

Taehee An; Bishweshwar Pant; Seong Yun Kim; Mira Park; Soo-Jin Park; Hak-Yong Kim

Journal of Industrial and Engineering Chemistry, Vol.55, 35-39, November, 2017

DOI10.1016/j.jiec.2017.06.044 Export Citation

Mechanical and optical properties of electrospun nylon-6,6 nanofiber reinforced cyclic butylene terephthalate composites

Taehee An¹, Bishweshwar Pant², Seong Yun Kim³, Mira Park^{4, †}, Soo-Jin Park^{2, †}, and Hak-Yong Kim^{1, 4, †}

¹Department of BIN Convergence Technology, Chonbuk National University, Jeonju 561-761, South Korea
²Department of Chemistry, Inha University, 100 Inharo, Incheon 402-751, South Korea
³Carbon Composite Materials Research Center, Institute of Advanced Composite Materials, Korea Institute of Science and Technology (KIST), Wanjugun, Jeonbuk 565-905, South Korea
⁴Department of Organic Materials & Fiber Engineering, Chonbuk National University, Jeonju 561-756, South Korea

E-mail:, ,

In this study, electrospun Nylon-6,6 nanofiber (Nylon-6,6 NFs) reinforced cyclic butylene terephthalate (CBT) composites were prepared by electrospinning process followed by hot press method and compared with the pristine Nylon-6,6 nanofiber in terms of tensile properties and light transparency. The formation of hydrogen bonds between CBT and nylon-6,6 molecules results enhancement of the mechanical property of the composite. Further, the high optical transmittance of the composite was achieved.

Keywords:Nylon-6,6;Electrospinning;Transparent;Mechanical property

[References]

Pant B, Pant HR, Pandeya DR, Panthi G, Nam KT, Hong ST, Kim CS, Kim HY, Colloids Surf. A: Physicochem. Eng. Asp., 395, 94 (2012)
Huang ZM, Zhang YZ, Kotaki M, Ramakrishna S, Compos. Sci. Technol., 63, 2223 (2003)
Wang XF, Ding B, Sun G, Wang MR, Yu JY, Prog. Mater. Sci., 58(8), 1173 (2013)
Li D, Xia YN, Adv. Mater., 16(14), 1151 (2004)
Pant B, Park M, Park SJ, Kim HY, Compos. Res., 29, 186 (2016)
Gao J, Li W, Shi H, Hu M, Li RKY, Compos. Sci. Technol., 92, 95 (2014)
Kim JH, Kataoka M, Jung YC, Ko YI, Fujisawa K, Hayashi T, Kim YA, Endo M, ACS Appl. Mater. Interfaces, 5, 4150 (2013)
Jiang S, Duan G, Hou H, Greiner A, Agarwal S, ACS Appl. Mater. Interfaces, 4, 4366 (2012)
Jiang S, Hou H, Greiner A, Agarwal S, ACS Appl. Mater. Interfaces, 4, 2597 (2012)
Mittal G, Dhand V, Rhee KY, Park SJ, Lee WR, J. Ind. Eng. Chem., 21, 11 (2015)
Baets J, Godara A, Devaux J, Verpoest I, Compos. Pt. A-Appl. Sci. Manuf., 39, 1756 (2008)
Brunelle DJ, J. Polym. Sci. A: Polym. Chem., 46(4), 1151 (2008)
Mohd Ishak ZA, Leong YW, Steeg M, Karger-Kocsis J, Compos. Sci. Technol., 67, 390 (2007)
Romhany G, Vigh J, Thomann R, Karger-Kocsis J, Sajo IE, Macromol. Mater. Eng., 296, 544 (2011)
Navarro-Pardo F, Martinez-Barrera G, Martinez-Hernandez A, Castano V, Rivera-Armenta J, Medellin-Rodriguez F, Velasco-Santos C, Materials, 6, 3494 (2013)
Suzuki A, Chen Y, Kunugi T, Polymer, 39(22), 5335 (1998)
Nirmala R, Navamathavan R, Kang HS, El-Newehy MH, Kim HY, Colloids Surf. B: Biointerfaces, 83, 173 (2011)
Tang C, Liu H, Compos. Pt. A-Appl. Sci. Manuf., 39, 1638 (2008)
Fayemi OE, Adekunle AS, Ebenso EE, J. Nanomater., 2016, 10 (2016)
Wu F, Yang G, Polym. Adv. Technol., 22, 1466 (2011)
Parton H, Baets J, Lipnik P, Goderis B, Devaux J, Verpoest I, Polymer, 46(23), 9871 (2005)
Lee C, Pant B, Alam AM, An T, Chung HJ, Hong ST, Park SJ, Park M, Kim HY, Macromol. Res., 24(10), 924 (2016)

[Related Articles]

[1] Pant B, Pant HR, Pandeya DR, Panthi G, Nam KT, Hong ST, Kim CS, Kim HY, Colloids Surf. A: Physicochem. Eng. Asp., 395, 94 (2012)

[2] Huang ZM, Zhang YZ, Kotaki M, Ramakrishna S, Compos. Sci. Technol., 63, 2223 (2003)

[3] Wang XF, Ding B, Sun G, Wang MR, Yu JY, Prog. Mater. Sci., 58(8), 1173 (2013)

[4] Li D, Xia YN, Adv. Mater., 16(14), 1151 (2004)

[5] Pant B, Park M, Park SJ, Kim HY, Compos. Res., 29, 186 (2016)

[6] Gao J, Li W, Shi H, Hu M, Li RKY, Compos. Sci. Technol., 92, 95 (2014)

[7] Kim JH, Kataoka M, Jung YC, Ko YI, Fujisawa K, Hayashi T, Kim YA, Endo M, ACS Appl. Mater. Interfaces, 5, 4150 (2013)

[8] Jiang S, Duan G, Hou H, Greiner A, Agarwal S, ACS Appl. Mater. Interfaces, 4, 4366 (2012)

[9] Jiang S, Hou H, Greiner A, Agarwal S, ACS Appl. Mater. Interfaces, 4, 2597 (2012)

[10] Mittal G, Dhand V, Rhee KY, Park SJ, Lee WR, J. Ind. Eng. Chem., 21, 11 (2015)

[11] Baets J, Godara A, Devaux J, Verpoest I, Compos. Pt. A-Appl. Sci. Manuf., 39, 1756 (2008)

[12] Brunelle DJ, J. Polym. Sci. A: Polym. Chem., 46(4), 1151 (2008)

[13] Mohd Ishak ZA, Leong YW, Steeg M, Karger-Kocsis J, Compos. Sci. Technol., 67, 390 (2007)

[14] Romhany G, Vigh J, Thomann R, Karger-Kocsis J, Sajo IE, Macromol. Mater. Eng., 296, 544 (2011)

[15] Navarro-Pardo F, Martinez-Barrera G, Martinez-Hernandez A, Castano V, Rivera-Armenta J, Medellin-Rodriguez F, Velasco-Santos C, Materials, 6, 3494 (2013)

[16] Suzuki A, Chen Y, Kunugi T, Polymer, 39(22), 5335 (1998)

[17] Nirmala R, Navamathavan R, Kang HS, El-Newehy MH, Kim HY, Colloids Surf. B: Biointerfaces, 83, 173 (2011)

[18] Tang C, Liu H, Compos. Pt. A-Appl. Sci. Manuf., 39, 1638 (2008)

[19] Fayemi OE, Adekunle AS, Ebenso EE, J. Nanomater., 2016, 10 (2016)

[20] Wu F, Yang G, Polym. Adv. Technol., 22, 1466 (2011)

[21] Parton H, Baets J, Lipnik P, Goderis B, Devaux J, Verpoest I, Polymer, 46(23), 9871 (2005)

[22] Lee C, Pant B, Alam AM, An T, Chung HJ, Hong ST, Park SJ, Park M, Kim HY, Macromol. Res., 24(10), 924 (2016)