K1 - K14 |
Report on the electrolytic industries for the year 2004 Srinivasan V, Arora P, Ramadass P |
L7 - L7 |
Temperature and pH dependence of oxygen reduction catalyzed by iron fluoroporphyrin adsorbed on a graphite electrode (vol 152, pg A2421, 2005) Zhang L, Song CJ, Zhang JJ, Wang HJ, Wilkinson DP |
D51 - D61 |
Nitrate removal by continuous electropermutation using ion-exchange textile - I. Modeling Danielsson CO, Dahlkild A, Velin A, Behm M |
D62 - D67 |
Nitrate removal by continuous electropermutation using ion-exchange textile - II. Experimental investigation Danielsson CO, Velin A, Behm M, Dahlkild A |
D68 - D73 |
High efficient electrochemical carbonylation of methanol to dimethyl carbonate by Br-2/Br- mediator system over Pd/C anode Funakawa A, Yamanaka I, Otsuka K |
D74 - D83 |
La0.4Sr0.6Ti1-xMnxO3-delta perovskites as anode materials for solid oxide fuel cells Fu QX, Tietz F, Stover D |
F53 - F59 |
Galvanic corrosion between copper and tantalum under CMP conditions Tamilmani S, Huang W, Raghavan S |
F60 - F67 |
Wet etch characteristics of hafnium silicate layers Claes M, Paraschiv V, Dictus D, Conard T, Delabie A, Van Elshocht S, Zhao C, Everaert JL, Boullart W, Vanhaelemeersch S, De Gendt S |
H63 - H67 |
Characterization of Eu-doped SnO2 thin films deposited by radio-frequency sputtering for a transparent conductive phosphor layer Park DH, Cho YH, Do YR, Ahn BT |
H68 - H70 |
Improving electrical and optical characteristics of white organic light-emitting diodes by using double buffer layers Chen GT, Su SH, Yokoyama M |
H71 - H77 |
Design and optical properties of ZnS : Mn thin-film electroluminescent devices on 2D SiO2 corrugated photonic crystal substrates Do YR, Ko KY, Kim YC, Cho SH, Huh YD, Yun SJ, Choi H |
H78 - H81 |
Synthesis of Ca4GdO(BO3)(3): Eu3+, Al3+ by sol-gel processing and its luminescence properties Wang YH, He L |
H82 - H85 |
Preparation of CaMgSi2O6 : Eu2+ phosphor films by a layer-by-layer deposition method Kida T, Rahman MM, Nagano M |
H86 - H87 |
Rapid combustion synthesis of light-storing-emitting material SrAl2O4 : Eu2+,Dy3+ and its spectral characteristics Zhang YQ, Chen ZL, Zhou ZM |
J21 - J25 |
Growth and kinetic modeling of Fe(CO)(5)-catalyzed carbon nanotubes grown by chemical vapor deposition Kuo DH, Su MY |
A631 - A636 |
Investigations on formation of the automotive negative plate and its performance Huang MX, Guo YL, Zhou XC, Hu JM |
A637 - A648 |
Thermal analysis of spirally wound lithium batteries Chen SC, Wang YY, Wan CC |
A649 - A653 |
Modification of Al current collector/active material interface for power improvement of electrochemical capacitor electrodes Portet C, Taberna PL, Simon P, Flahaut E |
A654 - A663 |
Reduction and reoxidation kinetics of nickel-based SOFC anodes Tikekar NM, Armstrong TJ, Virkar AV |
A664 - A668 |
Analysis of water transport in PEFCs by magnetic resonance imaging measurement Teranishi K, Tsushima S, Hirai S |
A669 - A672 |
Diagnostic evaluation of detrimental phenomena in high-power lithium-ion batteries Kostecki R, Lei JL, McLarnon F, Shim J, Striebel K |
A673 - A678 |
An experimental and computational study of the electrode material olivine-LiCoAsO4 Arroyo-de Dompablo ME, Amador U, Garcia-Alvarado F |
A679 - A688 |
Critical role of polymeric binders on the electronic transport properties of composites electrode Guy D, Lestriez B, Bouchet R, Guyomard D |
A689 - A698 |
Fe-based catalysts for oxygen reduction in PEMFCs - Importance of the disordered phase of the carbon support Jaouen F, Charreteur F, Dodelet JP |
A699 - A704 |
Efficient sensitization of mesoporous electrodeposited zinc oxide by cis-bis(isothiocyanato)bis(2,2'-bipyridyl-4,4'-dicarboxylato)-ruthenium(II) Loewenstein T, Nonomura K, Yoshida T, Michaelis E, Wohrle D, Rathousky J, Wark M, Schlettwein D |
A705 - A715 |
Electrochemical oxidation of H-2, CO, and CO/H-2 mixtures on patterned Ni anodes on YSZ electrolytes Sukeshini AM, Habibzadeh B, Becker BP, Stoltz CA, Eichhorn BW, Jackson GS |
A716 - A723 |
Synthesis and characterization of carbon-coated lithium transition metal phosphates LiMPO4 (M = Fe, Mn, Co, Ni) prepared via a nonaqueous sol-gel route Yang JS, Xu JJ |
A724 - A730 |
A novel approach for measuring catalytic activity of planar model catalysts in the polymer electrolyte fuel cell environment Ekstrom H, Hanarp P, Gustavsson M, Fridell E, Lundblad A, Lindbergh G |
A731 - A737 |
Contribution of the structural changes of LiNi0.8Co0.15Al0.05O2 cathodes on the exothermic reactions in Li-ion cells Bang HJ, Joachin H, Yang H, Amine K, Prakash J |
A738 - A742 |
Electrochemical properties of biphase Ni(OH)(2) electrodes for secondary rechargeable Ni/MH batteries Han TA, Tu JP, Wu JB, Li Y, Yuan YF |
A743 - A748 |
Electrochemical capacitance performance of hybrid supercapacitors based on Ni(OH)(2)/carbon nanotube composites and activated carbon Wang YG, Yu L, Xia YY |
A749 - A758 |
Steady-state and EIS investigations of hydrogen electrodes and membranes in polymer electrolyte fuel cells I. Modeling Wiezell K, Gode P, Lindbergh G |
A759 - A764 |
Steady-state and EIS investigations of hydrogen electrodes and membranes in polymer electrolyte fuel cells II. Experimental Wiezell K, Gode P, Lindbergh G |
A765 - A773 |
Chromium poisoning of perovskite cathodes by the ODS alloy Cr5Fe1Y(2)O(3) and the high chromium ferritic steel Crofer22APU Konysheva E, Penkalla H, Wessel E, Mertens J, Seeling U, Singheiser L, Hilpert K |
A774 - A780 |
Studies of LiMn2O4 capacity fading at elevated temperature using in situ synchrotron X-ray diffraction Chung KY, Lee HS, Yoon WS, McBreen J, Yang XQ |
A781 - A786 |
Structural characterization of the surface-modified LixNi0.9Co0.1O2 cathode materials by MPO4 coating (M = Al, Ce, SrH, and Fe) for Li-ion cells Lee H, Kim Y, Hong YS, Kim Y, Kim MG, Shin NS, Cho J |
A787 - A793 |
Spray pyrolyzed PbO-carbon nanocomposites as anode for lithium-ion batteries Ng SH, Wang J, Konstantinov K, Wexler D, Chen J, Liu HK |
A794 - A798 |
Comparison of Ln(0.6)Sr(0.4)CoO(3-delta) (Ln = La, Pr, Nd, Sm, and Gd) as cathode materials for intermediate temperature solid oxide fuel cells Lee KT, Manthiram A |
A799 - A808 |
Investigation of the lithiation and delithiation conversion mechanisms of bismuth fluoride nanocomposites Bervas M, Mansour AN, Yoon WS, Al-Sharab JF, Badway F, Cosandey F, Klein LC, Amatucci GG |
B129 - B136 |
Enhanced graphical representation of electrochemical impedance data Orazem ME, Pebere N, Tribollet B |
B137 - B143 |
Voltage oscillations and morphology during the galvanostatic formation of self-organized TiO2 nanotubes Taveira LV, Macak JM, Sirotna K, Dick LFP, Schmuki P |
C203 - C206 |
Novel magnetic finishing abrasive with nickel-cobalt-plated active carbon and its application to ultraprecision polishing Zhang YR, Yoshihara S, Shinmura T |
C207 - C212 |
In situ stress measurements during aluminum deposition from AlCl3-EtMeImCl ionic liquid Stafford GR, Kongstein OE, Haarberg GM |
C213 - C217 |
Electrodeposition and thermoelectric characterization of Bi2Te3 Heo P, Hagiwara K, Ichino R, Okido M |
C218 - C222 |
Microrod and microtube formation by electrodeposition of metal into ordered macropores prepared in p-type silicon Kobayashi K, Harraz FA, Izuo S, Sakka T, Ogata YH |
C223 - C228 |
Air-gap fabrication using a sacrificial polymeric thin film synthesized via initiated chemical vapor deposition Chan K, Gleason KK |
C229 - C234 |
Properties of aluminum nitride thin films deposited by an alternate injection of trimethylaluminum and ammonia under ultraviolet radiation Eom D, No SY, Hwang CS, Kim HJ |
C235 - C241 |
An in situ ellipsometric study of Cl--induced adsorption of PEG on Ru and on underpotential deposited Cu on Ru Walker ML, Richter LJ, Josell D, Moffat TP |
C242 - C248 |
Electroplating of dysprosium, electrochemical investigations, and study of magnetic properties Lodermeyer J, Multerer M, Zistler M, Jordan S, Gores HJ, Kipferl W, Diaconu E, Sperl M, Bayreuther G |
C249 - C253 |
Electrodeposition of porous silver films on blanket and patterned aluminum-copper films Brevnov DA |
C254 - C257 |
Electrodeposition of Cu from acidic sulfate solutions in the presence of bis-(3-sulfopropyl)-disulfide (SPS) and chloride ions Bozzini B, D'Urzo L, Romanello V, Mele C |
C258 - C264 |
Electrochemical characterization of adsorption-desorption of the cuprous-suppressor-chloride complex during electrodeposition of copper Long JG, Searson PC, Vereecken PM |
C265 - C271 |
Current distribution for the metallization of resistive wafer substrates under controlled geometric variations Lee JM, McCrabb H, Taylor EJ, Carpio R |
G267 - G271 |
A novel polycarbosilane-based low-k dielectric material Wang PI, Wu ZZ, Lu TM, Interrante LV |
G272 - G277 |
Implications of wafer-size scale-up on frictional, thermal, and kinetic attributes of interlayer dielectric CMP process Rosales-Yeomans D, Borucki L, Doi T, Lujan L, Philipossian A |
G278 - G282 |
Luminescence properties of Eu2+-doped MAl2-xSixO4-xNx (M=Ca, Sr, Ba) conversion phosphor for white LED applications Li YQ, de With G, Hintzen HT |
G283 - G290 |
Electronic defect and contamination monitoring in Si wafers using spectrally integrated photocarrier radiometry Shaughnessy D, Mandelis A |
G291 - G295 |
Adhesive wafer bonding using partially cured benzocyclobutene for three-dimensional integration Niklaus F, Kumar RJ, McMahon JJ, Yu J, Lu JQ, Cale TS, Gutmann RJ |
G296 - G298 |
Effects of thermal annealing on Al-doped ZnO films deposited on p-type gallium nitride Tun CJ, Sheu JK, Lee ML, Hu CC, Hsieh CK, Chi GC |
G299 - G303 |
Silicon-on-insulator wafers with buried cavities Suni T, Henttinen K, Dekker J, Luoto H, Kulawski M, Makinen J, Mutikainen R |
G304 - G308 |
Diffusion barrier properties of atomic layer deposited ultrathin Ta2O5 and TiO2 films Alen P, Vehkamaki M, Ritala M, Leskela M |
G309 - G313 |
Linear GRINSCH 1.55-mu m InGaAsP/InP strained multiple quantum well laser diodes grown by substrate temperature control Hu CW, Lee FM, Huang KF, Tsai CL, Wu MC, Huang YH, Ho WJ |
G314 - G318 |
Photoresist and residue removal using gas-expanded liquids Song I, Spuller M, Levitin G, Hess DW |
G319 - G323 |
Deep ultraviolet raman microspectroscopic characterization of polishing-induced surface damage in SiC crystals Nakashima S, Kato T, Nishizawa S, Mitani T, Okumura H, Yamamoto T |
G324 - G329 |
Low-frequency (1/f) noise performance of n- and p-MOSFETs with poly-Si/Hf-based gate dielectrics Srinivasan P, Simoen E, Pantisano L, Claeys C, Misra D |
G330 - G332 |
The electrical and pH-sensitive characteristics of thermal Gd2O3/SiO2-stacked oxide capacitors Chang LB, Ko HH, Lee YL, Lai CS, Wang CY |
G333 - G336 |
Influence of the formation of the second phase in ZnO/Ga nanowire systems Hsu CL, Lin YR, Chang SJ, Lu TH, Lin TS, Tsai SY, Chen IC |
G337 - G340 |
Full silicidation of silicon gate electrodes using nickel-terbium alloy for MOSFET applications Lim AEJ, Lee RTP, Tung CH, Tripathy S, Kwong DL, Yeo YC |
G341 - G346 |
An ultralow dielectric constant porous silica film with cu directly grown by a displacement process Yang CH, Yang WL |
G347 - G352 |
Critical adhesion energy of benzocyclobutene-bonded wafers Kwon Y, Seok J, Lu JQ, Cale TS, Gutmann RJ |
G353 - G357 |
Effect of nitrogen incorporation in HfO2 films deposited by plasma-enhanced atomic layer deposition Lee Y, Kim S, Koo J, Kim I, Choi J, Jeon H, Won Y |
G358 - G362 |
Stability of Cu on epoxy siloxane polymer under bias temperature stress Wang PI, Juneja JS, Murarka SP, Lu TM, Jezewski C, Ghoshal R, Ghoshal R, Bakhru H |