Applied Surface Science

Applied Surface Science, Vol.264 Entire volume, number list

ISSN: 0169-4332 (Print)

In this Issue (139 articles)

1 - 6	Hybrid structure for efficiency enhancement of photodetectors Malekmohammad M, Soltanolkotabi M, Asadi R, Naderi MH, Erfanian A, Zahedinejad M, Bagheri S, Khaje M
7 - 10	Influence of annealing atmosphere on room temperature ferromagnetism of Mn-doped ZnO nanoparticles Gao QQ, Yu QX, Yuan K, Fu XN, Chen B, Zhu CX, Zhu H
11 - 16	Polycrystalline silicon thin films by aluminum induced crystallization of amorphous silicon Wang T, Yan H, Zhang M, Song X, Pan Q, He T, Hu Z, Jia H, Mai Y
17 - 20	Low temperature method for synthesis of ZnS quantum dots and its luminescence characterization studies Senthilkumara K, Kalaivani T, Kanagesan S, Balasubramanian V
21 - 26	Low temperature SiNx:H films deposited by inductively coupled plasma for solar cell applications Zhou HP, Wei DY, Xu LX, Guo YN, Xiao SQ, Huang SY, Xu S
27 - 30	Comparison of in situ and ex situ bioconjugation of Au nanoparticles generated by laser ablation Mutisya S, Franzel L, Barnstein BO, Faber TW, Ryan JJ, Bertino MF
31 - 35	Surface-enhanced Raman spectroscopy (SERS) using Ag nanoparticle films produced by pulsed laser deposition Smyth CA, Mirza I, Lunney JG, McCabe EM
36 - 44	Reverse atom transfer radical polymerization (RATRP) for anti-clotting PU-LaCl3-g-P(MPC) films Lu CY, Zhou NL, Xiao YH, Tang YD, Jin SX, Wu Y, Shen J
45 - 51	Tribological behavior of electron beam D6ac weldment Wu SC, Tseng KH, Wen HC, Wu MJ, Chou CP
52 - 55	Refining femtosecond laser induced periodical surface structures with liquid assist Jiao LS, Ng EYK, Zheng HY
56 - 60	Control of the graphene growth rate on capped SiC surface under strong Si confinement Celebi C, Yanik C, Demirkol AG, Kaya II
61 - 69	UV-assisted surface modification of PET fiber for adhesion improvement Liu XD, Sheng DK, Gao XM, Li TB, Yang YM
70 - 78	Effect of microstructure on the zinc phosphate conversion coatings on magnesium alloy AZ91 Phuong NV, Moon S, Chang D, Lee KH
79 - 87	Determination of irradiation parameters for laser-induced periodic surface structures Eichstadt J, Romer GRBE, In't Veld AJH
88 - 93	Effect of LaB6 on the thermal shock property of MoSi2-SiC coating for carbon/carbon composites Li T, Li HJ, Shi XH
94 - 99	Preparation and characterization of boron-doped titania nano-materials with antibacterial activity Xue XX, Wang YZ, Yang H
100 - 104	Microstructure properties of tempered D6ac steel Lian DM
105 - 110	Effect of surfactant concentration on characteristics of mesoporous bioactive glass prepared by evaporation induced self-assembly process Shih CC, Chien CS, Kung JC, Chen JC, Chang SS, Lu PS, Shih CJ
111 - 116	Photocatalytic activity and reusability study of nanocrystalline TiO2 films prepared by sputtering technique Barrocas B, Monteiro OC, Jorge MEM, Serio S
117 - 127	Structural analysis of heat-treated birch (Betule papyrifera) surface during artificial weathering Huang XA, Kocaefe D, Kocaefe Y, Boluk Y, Krause C
128 - 132	Nano-SiC/SiC anti-oxidant coating on the surface of graphite Jafari H, Ehsani N, Khalifeh-Soltani SA, Jalaly M
133 - 138	Effect of post-sulfurization on the composition, structure and optical properties of Cu2ZnSnS4 thin films deposited by sputtering from a single quaternary target He J, Sun L, Zhang KZ, Wang WJ, Jiang JC, Chen Y, Yang PX, Chu JH
139 - 147	The study of visible light active bismuth modified nitrogen doped titanium dioxide photocatlysts: Role of bismuth Bagwasi S, Niu YX, Nasir M, Tian BZ, Zhang JL
148 - 156	Material removal mechanism during porous silica cluster impact on crystal silicon substrate studied by molecular dynamics simulation Chen RL, Jiang RR, Lei H, Liang M
157 - 161	Synthesis and enhanced photoelectrocatalytic activity of p-n junction Co3O4/TiO2 nanotube arrays Dai GP, Liu SQ, Liang Y, Luo TX
162 - 170	Growth of flower-like ZnO on ZnO nanorod arrays created on zinc substrate through low-temperature hydrothermal synthesis Shi RX, Yang P, Dong XB, Ma Q, Zhang AY
171 - 175	Durable antimicrobial finishing of cellulose with QSA silicone by supercritical adsorption Chen Y, Niu MQ, Yuan S, Teng HN
176 - 183	Study on feasibility of producing an amorphous surface layer of Fe49Cr18Mo7B16C4Nb3 by pulsed Nd:YAG laser surface melting Mojaver R, Mojtahedi F, Shahverdi HR, Torkamany MJ
184 - 190	Effect of post annealing on structural, optical and dielectric properties of MgTiO3 thin films deposited by RF magnetron sputtering Kumar TS, Bhuyan RK, Pamu D
191 - 196	A new way to synthesize carbon nanofiber film on bulk titanium via hybrid surface mechanical attrition treatment Yang XF, Lu J
197 - 201	Significant effect of substrate temperature on the phase structure, optical and electrical properties of RF sputtered CIGS films Yu Z, Yan Y, Li SS, Zhang YX, Yan CP, Liu L, Zhang Y, Zhao Y
202 - 206	Electronic structure of chromium-containing amorphous hydrogenated carbon thin films studied by X-ray absorption spectroscopy Cheng HY, Chiou JW, Ting JM, Chen JM, Lee JF, Tzeng Y
207 - 212	The microstructure and mechanical properties of multilayer diamond-like carbon films with different modulation ratios Xu ZY, Zheng YJ, Jiang F, Leng YX, Sun H, Huang N
213 - 218	Effect of deposition variables on properties of CBD ZnS thin films prepared in chemical bath of ZnSO4/SC(NH2)(2)/Na3C3H5O7/NH4OH Liu WL, Yang CS, Hsieh SH, Chen WJ, Fern CL
219 - 224	Dependence of core-level XPS spectra on iron silicide phase Ohtsu N, Oku M, Satoh K, Wagatsuma K
225 - 228	Structural and electrical characterization of La0.72Ca0.28MnO3 ceramic and thin films Ma J, Theingia M, Zhang H, Ding X, Chen QM
229 - 236	Laser-induced colour marking-Sensitivity scaling for a stainless steel Antonczak AJ, Kocon D, Nowak M, Koziol P, Abramski KM
237 - 241	X-ray absorption spectroscopy and photoluminescence study of rare earth ions doped strontium sulphide phosphors Vij A, Gautam S, Kumar V, Brajpuriya R, Kumar R, Singh N, Chae KH
242 - 246	Synthesis of a sugar-organometallic compound 1,1'-difurfurylferrocene and its microwave preparation of carbon/iron oxide nanocomposite Zhao SY, Cooper DC, Xu HX, Zhu PH, Suggs JW
247 - 254	Dissociation and reconstruction of O-2 on Al (111) studied by First-principles Guo JX, Wei LJ, Ge DY, Guan L, Wang YL, Liu BT
255 - 260	Fabrication of one-dimensional mesoporous alpha-Fe2O3 nanostructure via self-sacrificial template and its enhanced Cr(VI) adsorption capacity Jia ZG, Wang QZ, Ren DP, Zhu RS
261 - 268	Effects of acid treatment on structure, properties and biocompatibility of carbon nanotubes Dong CB, Campell AS, Eldawud R, Perhinschi G, Rojanasakul Y, Dinu CZ
269 - 272	Crystallization characteristics of Mg-doped Ge2Sb2Te5 films for phase change memory applications Fu J, Shen X, Nie QH, Wang GX, Wu LC, Dai SX, Xu TF, Wang RP
273 - 279	Laser-induced surface alloying in nanosized Ni/Ti multilayer structures Petrovic S, Radak B, Perusko D, Pelicon P, Kovac J, Mitric M, Gakovic B, Trtica M
280 - 285	Fabrication of nanoscale alumina on NiAl(100) with a scanning tunneling microscope Lin CW, Wang CT, Luo MF
286 - 296	Different plasma-based strategies to improve the interaction of anionic dyes with polyester fabrics surface Salem T, Pleul D, Nitschke M, Muller M, Simon F
297 - 304	High-resolution photoelectron spectroscopy analysis of sulfidation of brass at the rubber/brass interface Ozawa K, Kakubo T, Shimizu K, Amino N, Mase K, Komatsu T
305 - 311	Platinum-nickel catalyst: The effect of promoters in cis-oleic acid adsorption Simonetti S, Martirena M, Ulacco S, Brizuela G
312 - 319	High temperature oxidation behavior of AISI 304L stainless steel-Effect of surface working operations Ghosh S, Kumar MK, Kain V
320 - 328	Density functional theory study of the effects of alloying additions on sulfur adsorption on nickel surfaces Malyi OI, Chen Z, Kulish VV, Bai KW, Wu P
329 - 334	Graphene sheets synthesized by ionic-liquid-assisted electrolysis for application in water purification Chang CF, Truong QD, Chen JR
335 - 343	Influence of activated carbon characteristics on toluene and hexane adsorption: Application of surface response methodology Izquierdo MT, de Yuso AM, Valenciano R, Rubio B, Pino MR
344 - 348	Hydrophobic/hydrophilic switching on zinc oxide micro-textured surface Myint MTZ, Kumar NS, Hornyak GL, Dutta J
349 - 357	Study of spatial homogeneity and nitridation of an Al nanopattern template with spectroscopic photoemission and low energy electron microscopy Qi B, Olafsson S, Zakharov AA, Gothelid M, Agnarsson B, Gislason HP
358 - 363	Copper phthalocyanine growth on hydrogen-terminated Si(100) surfaces: Contrasted molecular arrangements revealed by X-ray photoelectron studies Ben Hamada B, Akremi A, Arbi I, Menzli S, Themlin JM, Porte L, Chefi C
364 - 367	Spontaneous and dense assemblies of nanoparticles within micro-channels by the bubble deposition method Costa-Coquelard C, Azevedo J, Ardiaca F, Benattar JJ
368 - 374	Incorporation of dithiooxamide as a complexing agent into cellulose for the removal and pre-concentration of Cu(II) and Cd(II) ions from natural water samples Jorgetto AO, Silva RIV, Longo MM, Saeki MJ, Padilha PM, Martines MAU, Rocha BP, Castro GR
375 - 382	Hydrothermal in situ preparation of TiO2 particles onto poly(lactic acid) electrospun nanofibres Gupta KK, Mishra PK, Srivastava P, Gangwar M, Nath G, Maiti P
383 - 390	Facile synthesis of large-scale Ag nanosheet-assembled films with sub-10 nm gaps as highly active and homogeneous SERS substrates Li ZB, Meng GW, Liang T, Zhang Z, Zhu XG
391 - 398	Electrochemically deposited cobalt/platinum (Co/Pt) film into porous silicon: Structural investigation and magnetic properties Harraz FA, Salem AM, Mohamed BA, Kandil A, Ibrahim IA
399 - 403	Transmission electron microscopy and Raman characterization of copper (I) oxide microspheres composed of nanoparticles Wang WZ, Tu Y, Wang LJ, Liang YJ, Shi HL
404 - 409	UV laser direct texturing for high efficiency multicrystalline silicon solar cell Kim KR, Kim TH, Park HA, Kim SY, Cho SH, Yi J, Choi BD
410 - 418	Electrochemical behavior of anodized AA6063-T6 alloys affected by matrix structures Huang YS, Shih TS, Wu CE
419 - 423	Temperature dependent capacity contribution of thermally treated anode current collectors in lithium ion batteries Kim TK, Li XF, Wang CL
424 - 432	First-principles investigation of H2O on HfO2 (110) surface Li L, Huang X, Zhang YF, Guo X, Chen WK
433 - 442	Effect of the surface oxygen groups on methane adsorption on coals Hao SX, Wen J, Yu XP, Chu W
443 - 447	Preparation and characterization of fully separated gold nanowire arrays Siegel J, Heitz J, Reznickova A, Svorcik V
448 - 452	Transparent and conductive electrodes combining AZO and ATO thin films for enhanced light scattering and electrical performance Guillen C, Montero J, Herrero J
453 - 458	Improved mechanical properties of solution-cast silicone film reinforced with electrospun polyurethane nanofiber containing carbon nanotubes Tijing LD, Park CH, Kang SJ, Amarjargal A, Kim TH, Pant HR, Kim HJ, Lee DH, Kim CS
459 - 463	Effect of rapid thermal annealing on the compositional ratio and interface of Cu(In,Ga)Se-2 solar cells by XPS Chen DS, Yang J, Xu F, Zhou PH, Du HW, Shi JW, Yu ZS, Zhang YH, Bartholomeusz B, Ma ZQ
464 - 469	Study of the aluminum doping of zinc oxide films prepared by atomic layer deposition at low temperature Genevee P, Donsanti F, Renou G, Lincot D
470 - 475	Water effect on the surface morphology of TiO2 thin film modified by polyethylene glycol Wang SH, Wang KH, Dai YM, Jehng JM
476 - 484	Enhanced photoelectrochemical and photocatalytic performance of single-crystalline anatase TiO2 (101) nanobelts arrays originating from nanotubes arrays Chen QH, Liu HL, Xin YJ, Cheng XW, Li JJ
485 - 491	Structural and mechanical properties of the coral and nacre and the potentiality of their use as bone substitutes Hamza S, Slimane N, Azari Z, Pluvinage G
492 - 499	Surface properties of pillared acid-activated bentonite as catalyst for selective production of linear alkylbenzene Faghihian H, Mohammadi MH
500 - 506	Structure and conformation of poly(ethylene glycol) in confined space of montmorillonite Zhu SP, Chen JY, Li HL, Cao Y
507 - 515	Adsorption behavior of glycidoxypropyl-trimethoxy-silane on titanium alloy Ti-6.5Al-1Mo-1V-2Zr Liu JH, Zhan ZW, Yu M, Li SM
516 - 521	Tribological characteristics of electroless Ni-P-MoS2 composite coatings at elevated temperatures Li Z, Wang JB, Lu JJ, Meng JH
522 - 526	Effects of CdZnTe buffer layer thickness on properties of HgCdTe thin film grown by pulsed laser deposition Liu M, Bi D, Man BY, Kong DM, Xu XY
527 - 532	Fabrication of biomimetic hydrophobic films with corrosion resistance on magnesium alloy by immersion process Liu Y, Lu GL, Liu JD, Han ZW, Liu ZN
533 - 537	Influence of the sputtering reactive gas on the oxide and oxynitride La-Ti-O-N deposition by RF magnetron sputtering Lu Y, Le Paven-Thivet C, Benzerga R, Le Gendre L, Sharaiha A, Tessier F, Chevire F
538 - 544	Infrared transmissive and rain-erosion resistant performances of GeC/GaP double-layer thin films on ZnS substrates Li YP, Wang N, Che XS, Chen HB, Liu ZT
545 - 551	Effect of critical plasma spray parameter on complex permittivity and microstructure by plasma spraying Cr/Al2O3 coatings Zhao D, Luo F, Zhou WC, Zhu DM
552 - 556	Onset of shadowing-dominated growth of Ag films in glancing angle deposition: Kinetic Monte Carlo simulation Chen SH, Liang JS, Mo YJ, Luo DF, Jiang SJ
557 - 562	Research on manganese oxide catalysts surface pretreated with non-thermal plasma for NO catalytic oxidation capacity enhancement Li K, Tang XL, Yi HH, Ning P, Xiang Y, Wang JG, Wang C, Peng X
563 - 569	Atomistic simulation for the gamma'-phase volume fraction dependence of the interfacial behavior of Ni- base superalloy Yang XY, Hu WY, Zhang XM
570 - 573	Structural stability and electronic properties of LaO- and NiO2-terminated LaNiO3 (001) surface Guan L, Zuo JG, Jia GQ, Liu QB, Wei W, Guo JX, Dai XH, Liu BT, Wang YL, Fu GS
574 - 580	Bulk and surface structure characterization of nanoscopic silver doped lanthanum chromites Desai PA, Joshi PN, Patil KR, Athawale AA
581 - 588	High photocatalytic performance of BiOI/Bi2WO6 toward toluene and Reactive Brilliant Red Li HQ, Cui YM, Hong WS
589 - 592	A simple approach for surface hardening of polystyrene Tsuruta H, Ikinaga Y, Fujii Y, Tanaka K
593 - 597	Effect of MWNT electroless Ag plating on field emission properties of MWNT/Ag nanocomposite cathodes Ye Y, Guo TL
598 - 604	Polyvinyl alcohol functionalized cobalt ferrite nanoparticles for biomedical applications Salunkhe AB, Khot VM, Thorat ND, Phadatare MR, Sathish CI, Dhawale DS, Pawar SH
605 - 610	Nanoporous alumina formed by self-organized two-step anodization of Ni3Al intermetallic alloy in citric acid Stepniowski WJ, Cieslak G, Norek M, Karczewski K, Michalska-Domanska M, Zasada D, Polkowski W, Jozwik P, Bojar Z
611 - 615	Femtosecond-laser-induced nanostructure formed on nitrided stainless steel Yasumaru N, Sentoku E, Miyazaki K, Kiuchi J
616 - 620	Study of defect creation in self assembled ZnO nanostructures with electrically charged nanoparticles Dwivedi C, Dutta V
621 - 624	Formation of nanostructured emitter for silicon solar cells using catalytic silver nanoparticles Li D, Wang L, Li DS, Zhou N, Feng ZQ, Zhong XP, Yang DR
625 - 632	Effects of pulse bias on structure and properties of silicon/nitrogen-incorporated diamond-like carbon films prepared by plasma-enhanced chemical vapor deposition Nakazawa H, Miura S, Kamata R, Okuno S, Suemitsu M, Abe T
633 - 635	Influence of pulsed electron beam treatment on microstructure and properties of TA15 titanium alloy Gao YK
636 - 643	Synthesis and characterization of asymmetric polymer/inorganic nanocomposites with pH/temperature sensitivity Zhang XJ, Gao CM, Liu MZ, Huang YJ, Yu XY, Ding EY
644 - 652	Surface imprinting on nano-TiO2 as sacrificial material for the preparation of hollow chlorogenic acid imprinted polymer and its recognition behavior Li H, Li G, Li ZP, Lu CM, Li YA, Tan XZ
653 - 663	Fabrication of micro-pin array with high aspect ratio on stainless steel using nanosecond laser beam machining Lee SW, Shin HS, Chu CN
664 - 669	Elucidation of the reaction mechanism during the removal of copper oxide by halogen surfactant at the surface of copper plate Yokoyama S, Takahashi H, Itoh T, Motomiya K, Tohji K
670 - 673	Surface modification of TiO2 nanoparticles via photocataliticaly induced reaction: Influence of functionality of silane coupling agent Tomovska R, Daniloska V, Asua JM
674 - 680	Plasma focus assisted damage studies on tungsten Bhuyan M, Mohanty SR, Rao CVS, Rayjada PA, Raole PM
681 - 686	An XPS study of bromine in methanol etching and hydrogen peroxide passivation treatments for cadmium zinc telluride radiation detectors Babar S, Sellin PJ, Watts JF, Baker MA
687 - 691	Self-assembly growth of ZnO-based axial and radial junctions via a two-step method Chang YQ, Lu YD, Wang MW, Long Y, Ye RC
692 - 698	Examining the ground layer of St. Anthony from Padua 19th century oil painting by Raman spectroscopy, scanning electron microscopy and X-ray diffraction Vanco L, Kadlecikova M, Breza J, Caplovic L, Gregor M
699 - 706	Carbon nitride nanotube as a sensor for alkali and alkaline earth cations Beheshtian J, Baei MT, Bagheri Z, Peyghan AA
707 - 712	Effect of nanosilica on characteristics of carbonizates of phenol-formaldehyde resin - Fe(acac)(3) Gun'ko VM, Bogatyrov VM, Oranska OI, Galaburda MV, Polshin EV, Urubkov IV, Leboda R, Skubiszewska-Zieba J, Charmas B
713 - 717	Nanowelding configuration between carbon nanotubes in axial direction Cui JL, Yang LJ, Wang Y
718 - 726	Utilization of tin and titanium incorporated rice husk silica nanocomposite as photocatalyst and adsorbent for the removal of methylene blue in aqueous medium Adam F, Appaturi JN, Khanam Z, Thankappan R, Nawi MAM
727 - 731	Effects of surface impurities on epitaxial graphene growth del Campo V, Henriquez R, Haberle P
732 - 736	Characterization and kinetic investigation of electroless deposition of pure cobalt thin films on silicon substrates Cheng SL, Hsu TL, Lee T, Lee SW, Hu JC, Chen LT
737 - 742	Synthesis, phase to phase deposition and characterization of rutile nanocrystalline titanium dioxide (TiO2) thin films Gupta SK, Singh J, Anbalagan K, Kothari P, Bhatia RR, Mishra PK, Manjuladevi V, Gupta RK, Akhtar J
743 - 747	Production of ceramic layers on aluminum alloys by plasma electrolytic oxidation in alkaline silicate electrolytes Lugovskoy A, Zinigrad M, Kossenko A, Kazanski B
748 - 755	Self-assembling of strain-induced Y2O3 nanostructures grown on LaAlO3 by photo-assisted MOCVD Li W, Li SW, Li GX, Zhang BL, Chou PC
756 - 760	Investigation into conductivity of silver-coated cenosphere composites prepared by a modified electroless process Cao XG, Zhang HY
761 - 766	Differences in etching characteristics of TMAH and KOH on preparing inverted pyramids for silicon solar cells Fan YJ, Han PD, Liang P, Xing YP, Ye Z, Hu SX
767 - 771	Effect of surface modification on the porous silicon infiltrated with biomolecules Lawrence B, Alagumanikumaran N, Prithivikumaran N, Jeyakumaran N, Ramadas V, Natarajan B
772 - 778	Study on lotus-type porous copper electroplated with a Ni coating on inner surface of pores Du H, Song GH, Nakajima H, Zhao YH, Xiao JQ, Xiong TY
779 - 782	Tuning the optical properties of gold nanostructures fabricated on flexible substrates Nikov R, Nedyalkov N, Atanasov PA, Terakawa M, Shimizu H, Obara M
783 - 786	Improved interfacial and electrical properties of atomic layer deposition HfO2 films on Ge with La2O3 passivation Li XF, Liu XJ, Cao YQ, Li AD, Li H, Wu D
787 - 793	Preparation of stable aqueous dispersion of graphene nanosheets and their electrochemical capacitive properties Jin YH, Jia MQ, Zhang M, Wen QQ
794 - 800	Effect of surface area of substrates aiming the optimization of carbon nanotube production from ferrocene Osorio AG, Bergmann CP
801 - 810	Preparation and properties of homogeneous-reinforced polyvinylidene fluoride hollow fiber membrane Zhang XL, Xiao CF, Hu XY, Bai QQ
811 - 815	Surface electronic properties of polycrystalline bulk and thin film In2O3(ZnO)(k) compounds Hopper EM, Zhu QM, Gassmann J, Klein A, Mason TO
816 - 822	Preparation and characterization of HA microflowers coating on AZ31 magnesium alloy by micro-arc oxidation and a solution treatment Tang H, Yu DZ, Luo Y, Wang FP
823 - 831	Hard and relaxed a-SiNxHy films prepared by PECVD: Structure analysis and formation mechanism Xu XD, He Q, Fan TJ, Jiang YD, Huang L, Ao TH, Ma CQ
832 - 837	Properties of competitively adsorbed BSA and fibrinogen from their mixture on mixed and hybrid surfaces Pandey LM, Pattanayek SK
838 - 844	Preparation of a boron nitride single layer on a polycrystalline Rh surface Kiss J, Revesz K, Klivenyi G, Solymosi F
845 - 852	Origin of the visible-light photoactivity of NH3-treated TiO2: Effect of nitrogen doping and oxygen vacancies Chen YL, Cao XX, Lin BZ, Gao BF
853 - 863	Oxidative pit formation in pristine, hydrogenated and dehydrogenated graphene Jones JD, Morris CF, Verbeck GF, Perez JM
864 - 871	Grafting process of ethyltrimethoxysilane and polyphosphoric acid on calcium carbonate surface Kiehl J, Ben-Azzouz C, Dentel D, Derivaz M, Bischoff JL, Delaite C, Bistac S
872 - 878	Fabrication of the superhydrophobic surface on aluminum alloy by anodizing and polymeric coating Liu WY, Luo YT, Sun LY, Wu RM, Jiang HY, Liu YJ
879 - 885	Synthesis and characterization of in situ TiC-TiB2 composite coatings by reactive plasma spraying on a magnesium alloy Zou BL, Tao SY, Huang WZ, Khan ZS, Fan XZ, Gu LJ, Wang Y, Xu JY, Cai XL, Ma HM, Cao XQ
886 - 891	Surface modification of calcium-copper hydroxyapatites using polyaspartic acid Othmani M, Aissa A, Bachoua H, Debbabi M
892 - 901	Effect of laser operating mode in paint removal with a fiber laser Madhukar YK, Mullick S, Shukla DK, Kumar S, Nath AK
902 - 902	Effect of surface modification on carbon fiber and its reinforced phenolic matrix composite (vol 259, pg 288, 2012) Yuan H, Wang CG, Zhang S, Lin X
903 - 904	Study of methanol oxidation of hydrothermally synthesized PtRuMo on multi wall carbon nanotubes (vol 257, pg 8433, 2011) Kakati N, Maiti J, Oh JY, Yoon YS