1 - 4 |
Crystalline silicon solar cells with micro/nano texture Dimitrov DZ, Du CH |
5 - 16 |
Interphase chemistry of Si electrodes used as anodes in Li-ion batteries Pereira-Nabais C, Swiatowska J, Chagnes A, Ozanam F, Gohier A, Tran-Van P, Cojocaru CS, Cassir M, Marcus P |
17 - 21 |
Reaction between NiO and Al2O3 in NiO/gamma-Al2O3 catalysts probed by positronium atom Li CY, Zhang HJ, Chen ZQ |
22 - 26 |
Ultrasonic-assisted synthesis of core-shell structure CePO4:Tb/GdPO4 and GdPO4/CePO4:Tb nanophosphors and their photoluminescence properties Fan YY, Hu ZC, Yang J, Zhang C, Zhu L |
27 - 32 |
Superhydrophobic surfaces by replication of micro/nano-structures fabricated by ultrafast-laser-microtexturing Nayak BK, Caffrey PO, Speck CR, Gupta MC |
33 - 38 |
Preparation of polystyrene/SiO2 microsphere via Pickering emulsion polymerization: Synergistic effect of SiO2 concentrations and initiator sorts Zhou HO, Shi TJ, Zhou X |
39 - 45 |
Single-phase and well-dispersed Cu1.75S nanocrystals by ambient pressure diethylene glycol solution synthesis Zheng XR, Jin ZG, Liu H, Wang YQ, Wang X, Du HY |
46 - 50 |
Characterization for N- and P-type 3C-SiC on Si (100) substrate with thermal anneal and pulsed excimer laser anneal Lee KY, Chang YH, Huang YH, Huang CF, Chung CY, Zhao F |
51 - 56 |
Improving hydrophobicity of laser textured SiC surface with micro-square convexes Ma CH, Bai SX, Peng XD, Meng YG |
57 - 61 |
The biocompatibility of hydroxyapatite film deposition on micro-arc oxidation Ti6Al4V alloy Luo R, Liu ZD, Yan FX, Kong Y, Zhang YT |
62 - 66 |
Substrate surface effect on the structure of cubic BN thin films from synchrotron-based X-ray diffraction and reflection Zhang XM, Wen W, Li XL, He Q, Zhou XT |
67 - 72 |
Antibacterial action of silver-doped activated carbon prepared by vacuum impregnation Zhao Y, Wang ZQ, Zhao X, Li W, Liu SX |
73 - 80 |
Microscopic observations of osteoblast growth on micro-arc oxidized beta titanium Chen HT, Chung CJ, Yang TC, Tang CH, He JL |
81 - 88 |
Construct Scaffold-like delivery system with poly (lactic-co-glycolic) microspheres on micro-arc oxidation titanium Wang L, Zheng HD, Du C, Shi ZF, Ren L, Wang YJ |
89 - 93 |
Improvement in electrical characteristics of HfO2 gate dielectrics treated by remote NH3 plasma Huang LT, Chang ML, Huang JJ, Lin HC, Kuo CL, Lee MH, Liu CW, Chen MJ |
94 - 99 |
Preparation of aqueous dispersion of thermoplastic sizing agent for carbon fiber by emulsion/solvent evaporation Giraud I, Franceschi-Messant S, Perez E, Lacabanne C, Dantras E |
100 - 104 |
Structural and magnetic properties of annealed FePt/Ag/FePt thin films Pavlova OP, Verbitska TI, Vladymyrskyi IA, Sidorenko SI, Katona GL, Beke DL, Beddies G, Albrecht M, Makogon IM |
105 - 109 |
A simple approach to fabricate stable superhydrophobic glass surfaces Ji HY, Chen G, Yang J, Hu J, Song HJ, Zhao YT |
110 - 117 |
Effect of thermoplastic coating on interfacial adhesion of oxygen-plasma-pretreated PBO/PPESK composites Zhang XY, Chen P, Han DB, Yu Q, Ding ZF, Zhu XL |
118 - 125 |
Surface modification of oil fly ash and its application in selective capturing of carbon dioxide Yaumi AL, Hussien IA, Shawabkeh RA |
126 - 131 |
Fabrication of TiO2 film with different morphologies on Ni anode and application in photoassisted water electrolysis He HB, Chen AP, Lv H, Dong HJ, Chang M, Li CZ |
132 - 140 |
Controllable atomic layer deposition of one-dimensional nanotubular TiO2 Meng XB, Banis MN, Geng DS, Li XF, Zhang Y, Li RY, Abou-Rachid H, Sun XL |
141 - 147 |
Hydrophilicity, photocatalytic activity and stability of tetraethyl orthosilicate modified TiO2 film on glazed ceramic surface Zhang P, Tian J, Xu RF, Ma GJ |
148 - 154 |
Fe2O3 particles enwrapped by graphene with excellent cyclability and rate capability as anode materials for lithium ion batteries Xiao W, Wang ZX, Guo HJ, Li XH, Wang JX, Huang SL, Gan L |
155 - 160 |
Preparation of amino-functionalized silica in aqueous conditions Cuoq F, Masion A, Labille J, Rose J, Ziarelli F, Prelot B, Bottero JY |
161 - 169 |
Nanostructured Ag4O4 thin films produced by ion beam oxidation of silver Dellasega D, Casari CS, Vario F, Conti C, Bottani CE, Bassi AL |
170 - 175 |
Titanium interlayer to improve the adhesion of multilayer amorphous boron carbide coating on silicon substrate Vassallo E, Caniello R, Cremona A, Dellasega D, Miorin E |
176 - 181 |
Cell viability and adhesion on diamond-like carbon films containing titanium dioxide nanoparticles Wachesk CC, Pires CAF, Ramos BC, Trava-Airoldi VJ, Lobo AO, Pacheco-Soares C, Marciano FR, Da-Silva NS |
182 - 187 |
DFT study on the functionalization of a BN nanotube with sulfamide Beheshtian J, Peyghan AA, Tabar MB, Bagheri Z |
188 - 193 |
Synthesis of silver nanoparticles on reduced graphene oxide under microwave irradiation with starch as an ideal reductant and stabilizer Han YJ, Luo ZM, Yuwen LH, Tian J, Zhu XR, Wang LH |
194 - 198 |
Room temperature radio-frequency plasma-enhanced pulsed laser deposition of ZnO thin films Huang SH, Chou YC, Chou CM, Hsiao VKS |
199 - 204 |
Effect of strontium ions on the early formation of biomimetic apatite on single crystalline rutile Lindahl C, Engqvist H, Xia W |
205 - 208 |
Nickel adsorption and incorporation on a 2 x 2-T-4 GaN(0001) surface: A DFT study Gonzalez-Hernandez R, Lopez-Perez W, Rodriguez JA |
209 - 213 |
Thermal stability and effect of substrate temperature of TiSiBC hard nanocomposite coatings on microstructure, mechanical, thermal behaviour deposited by magnetron sputtering Mishra SK, Mahato P, Mahato B, Pathak LC |
214 - 218 |
Preparation of magnetic nickel hollow fibers with a trilobe structure using cellulose acetate fibers as templates Zeng CF, Li P, Zhang LX |
219 - 224 |
Simple quantification of surface carboxylic acids on chemically oxidized multi-walled carbon nanotubes Gong H, Kim ST, Lee JD, Yim S |
225 - 229 |
Superhydrophobicity determines the buoyancy performance of kapok fiber aggregates Zhang XY, Fu WY, Duan CT, Xiao H, Shi MW, Zhao N, Xu J |
230 - 234 |
Investigation on the sulfur state and phase transformation of spent and regenerated S zorb sorbents using XPS and XRD Qiu LM, Zou K, Xu GT |
235 - 238 |
Hydrophobic acrylic hard coating by surface segregation of hyper-branched polymers Haraguchi M, Hirai T, Ozawa M, Miyaji K, Tanaka K |
239 - 244 |
A new striped-phase of decanethiol self-assembled monolayers on Au(111) formed at a high solution temperature Azzam W, Al-Momani L |
245 - 249 |
Key technique for texturing a uniform pyramid structure with a layer of silicon nitride on monocrystalline silicon wafer Huang BR, Yang YK, Yang WL |
250 - 255 |
Formation and characterization of titania coatings with cortex-like slots formed on Ti by micro-arc oxidation treatment Liu ZF, Wang WQ, Liu HY, Wang TY, Qi M |
256 - 267 |
Application of multireflection grazing incidence method for stress measurements in polished Al-Mg alloy and CrN coating Marciszko M, Baczmanski A, Wierzbanowski K, Wrobel M, Braham C, Chopart JP, Lodini A, Bonarski J, Tarkowski L, Zazi N |
268 - 271 |
Impact of n-heptane as surfactant in the formation of CdO nanowires through microwave combustion Raj DS, Jayaprakash R, Prakash T, Kumar S, Neri G, Krishnakumar T |
272 - 279 |
Adsorption behavior of antimony(III) oxyanions on magnetite surface in aqueous organic acid environment Mittal VK, Bera S, Narasimhan SV, Velmurugan S |
280 - 287 |
Effective water disinfection using silver nanoparticle containing silica beads Quang DV, Sarawade PB, Jeon SJ, Kim SH, Kim JK, Chai YG, Kim HT |
288 - 293 |
Relationship between the electrochemical behavior of multiwalled carbon nanotubes (MWNTs) loaded with CuO and the photocatalytic activity of Eosin Y-MWNTs-CuO system Bui DN, Kang SZ, Qin LX, Li XQ, Mu J |
294 - 299 |
Surface acid etching of (BiO)(2)CO3 to construct (BiO)(2)CO3/BiOX (X = Cl, Br, I) heterostructure for methyl orange removal under visible light Cao J, Li X, Lin HL, Xu BY, Chen SF, Guan QM |
300 - 305 |
Hierarchical structure of Co3O4 nanoparticles on Si nanowires array films for lithium-ion battery applications Sun F, Huang K, Liu YP, Gao T, Han YA, Zhong JX |
306 - 312 |
Interfacial microstructure and properties of poly (phenylene benzobisoxazole) fiber grafted with graphene oxide via solvothermal method Li YW, Zhao F, Song YJ, Li J, Hu Z, Huang YD |
313 - 318 |
Poly(acrylic acid) brushes pattern as a 3D functional biosensor surface for microchips Wang YM, Cui Y, Cheng ZQ, Song LS, Wang ZY, Han BH, Zhu JS |
319 - 325 |
Lotus-like paper/paperboard packaging prepared with nano-modified overprint varnish Chen WT, Wang XL, Tao QS, Wang JF, Zheng Z, Wang XL |
326 - 331 |
Spectral and nonlinear optical transmission studies of Zr4+-doped TiO2 nanoparticles Rahulan KM, Stephen LD, Kanakam CC |
332 - 336 |
Ultraviolet, visible, and near infrared photoresponse properties of solution processed graphene oxide Qi X, Zou XH, Huang ZY, Ren L, Hao GL, Liu YD, Wei XL, Zhong JX |
337 - 343 |
Silver nanoparticles incorporated onto ordered mesoporous silica from Tollen's reagent Zienkiewicz-Strzalka M, Pasieczna-Patkowska S, Kozak M, Pikus S |
344 - 349 |
Evaporation and removal mechanism of phosphorus from the surface of silicon melt during electron beam melting Shi S, Dong W, Peng X, Jiang DC, Tan Y |
350 - 354 |
Theoretical study of oxidation-reduction reaction of Fe2O3 supported on MgO during chemical looping combustion Qin W, Chen QL, Wang Y, Dong CQ, Zhang JJ, Li WY, Yang YP |
355 - 359 |
Structural and dielectric properties of Ti and Er co-doped HfO2 gate dielectrics grown by RF sputtering Khaskheli MA, Wu P, Chand R, Li XF, Wang H, Zhang SP, Chen S, Pei YL |
360 - 367 |
Functionalized graphene nanoplatelets for enhanced mechanical and thermal properties of polyurethane nanocomposites Yadav SK, Cho JW |
368 - 374 |
The effect of adding PDMS-OH and silica nanoparticles on sol-gel properties and effectiveness in stone protection Li D, Xu FG, Liu ZH, Zhu JQ, Zhang QJ, Shao L |
375 - 379 |
Superparamagnetic iron oxide nanoparticles prepared by using an improved polyol method Zhang BL, Tu ZJ, Zhao FY, Wang J |
380 - 385 |
Study on the electron structure and optical properties of Ga0.5Al0.5As(100) beta(2)(2 x 4) reconstruction surface Yu XH, Du YJ, Chang BK, Ge ZH, Wang HG, Wang MS |
386 - 394 |
Fabrication of millimeter scale nanochannels using the AFM tip-based nanomachining method Geng YQ, Yan YD, Zhao XS, Hu ZJ, Liang YC, Sun T, Dong S |
395 - 399 |
The fabrication of controlled coral-like Cu2O films and their hydrophobic property Ding YB, Li Y, Yang LL, Li ZY, Xin WH, Liu X, Pan L, Zhao JP |
400 - 404 |
The impact of thermal annealing on the morphology of sputter deposited platinum clusters into anodic aluminum oxide pores Wu SJ, Brault P, Wang C, Courtois B |
405 - 409 |
Adsorption of formaldehyde and formyl intermediates on Pt, PtRu-, and PtRuMo-alloy surfaces: A density functional study Cahyanto WT, Shukri G, Agusta MK, Kasai H |
410 - 419 |
Preparation of photoactive nitrogen-doped rutile Dolat D, Moszynski D, Guskos N, Ohtani B, Morawski AW |
420 - 425 |
Influence of surface nitriding treatment on rolling contact behavior of Fe-based plasma sprayed coating Piao ZY, Xu BS, Wang HD, Wen DH |
426 - 432 |
Physicochemical properties of phospholipid model membranes hydrolyzed by phospholipase A(2) (PLA(2)) in the presence of cholesterol at different temperatures Jurak M, Szczes A, Chibowski E |
433 - 439 |
Facile single-step ammonia heat-treatment and quenching process for the synthesis of improved Pt/N-graphene catalysts Xiong B, Zhou YK, O'Hayre R, Shao ZP |
440 - 444 |
Effects of power on properties of ZnO thin films grown by radio frequency magnetron sputtering Zhao YJ, Jiang DY, Zhao M, Deng R, Qin JM, Gao S, Liang QC, Zhao JX |
445 - 450 |
A simple immersion approach for fabricating superhydrophobic Mg alloy surfaces Song JL, Lu Y, Huang S, Liu X, Wu LB, Xu WJ |