1 - 6 |
Highly porous Ti/SnO2 network composite film as stable binder-free anode materials for lithium ion batteries Zhou H, Zhong Y, He ZS, Zhang LY, Wang JM, Zhang JQ, Cao CN |
7 - 14 |
Facile one-pot approach to the synthesis of spherical mesoporous silica nanoflowers with hierarchical pore structure Yang H, Liao SJ, Huang C, Du L, Chen P, Huang PY, Fu ZY, Li YW |
15 - 20 |
Adsorption of alkali metal atoms on germanene: A first-principles study Pang Q, Zhang CL, Li L, Fu ZQ, Wei XM, Song YL |
21 - 29 |
Incubation and nanostructure formation on n- and p-type Si(100) and Si(111) at various doping levels induced by sub-nanojoule femto- and picosecond near-infrared laser pulses Schule M, Afshar M, Feili D, Seidel H, Konig K, Straub M |
30 - 39 |
Obtaining, structural, magnetic and corrosive properties of Nd-Fe-B alloy thin films on glass Neacsu EI, Constantin V, Yanushkevish K, Galyas A, Demidenko O, Calderon-Moreno J, Popescu AM |
40 - 45 |
Electrically conducting superhydrophobic microtextured carbon nanotube nanocomposite Caffrey PO, Gupta MC |
46 - 51 |
The effect of nitrogen incorporation in DLC films deposited by ECR Microwave Plasma CVD Seker Z, Ozdamar H, Esen M, Esen R, Kavak H |
52 - 63 |
Surface pretreatment effects on titanium chips for the adhesion of pathogenic bacteria in the MALDI-TOF MS Hasan N, Gopal J, Wu HF |
64 - 70 |
Enzyme encapsulation in silica gel prepared by polylysine and its catalytic activity Kawachi Y, Kugimiya S, Nakamura H, Kato K |
71 - 77 |
A highly efficient synthetic process of graphene films with tunable optical properties Han F, Yang SM, Jing WX, Jiang K, Jiang ZD, Liu H, Li L |
78 - 89 |
A theoretical and experimental study on the pulsed laser dressing of bronze-bonded diamond grinding wheels Deng H, Chen GY, Zhou C, Zhou XC, He J, Zhang Y |
90 - 96 |
A DFT study on the possibility of using boron nitride nanotubes as a dehydrogenation catalyst for methanol Esrafili MD, Nurazar R |
97 - 103 |
Mg-doped ZnO thin films deposited by the atomic layer chemical vapor deposition for the buffer layer of CIGS solar cell Li ZH, Cho ES, Kwon SJ |
104 - 111 |
Hard Cr-Al-Si-B-(N) coatings deposited by reactive and non-reactive magnetron sputtering of CrAlSiB target Kiryukhantsev-Korneev PV, Pierson JF, Kuptsov KA, Shtansky DV |
112 - 118 |
Effect of rutile phase on V2O5 supported over TiO2 mixed phase for the selective catalytic reduction of NO with NH3 Zhang SL, Zhong Q, Wang YN |
119 - 123 |
Solid source growth of Si oxide nanowires promoted by carbon nanotubes Lu CX, Liu WW, Wang XL, Li XC, Tan CW, Tay BK, Coquet P |
124 - 128 |
Dielectric and ferroelectric properties of (100)-oriented 0.9Pb(Sc0.5Ta0.5)O-3-0.1%PbTiO3/0.55Pb(Sc0.5Ta0.5)O-3-0.45%PbTiO3 heterostructures Li XD, Liu H, Liu G, Xiao DQ, Zhu JG |
129 - 137 |
Pb(II) removal from aqueous solution by a low-cost adsorbent dry desulfurization slag Wu Q, You RR, Clark M, Yu Y |
138 - 144 |
Fabrication Localized Surface Plasmon Resonance sensor chip of gold nanoparticles and detection lipase-osmolytes interaction Ghodselahi T, Hoornam S, Vesaghi MA, Ranjbar B, Azizi A, Mobasheri H |
145 - 150 |
A computational study of the double-bands plasmonic light scattering of Al2O3 coated Al nanoshells in the deep-ultraviolet range Zhu J, Li JJ, Zhao JW |
151 - 157 |
Nanomechanical morphology of amorphous, transition, and crystalline domains in phase change memory thin films Bosse JL, Grishin I, Huey BD, Kolosov OV |
158 - 165 |
Full characterization of Eu(OH)(3) and Eu2O3 nanorods Kang JG, Jung Y, Min BK, Sohn Y |
166 - 173 |
Efficient removal and highly selective adsorption of Hg2+ by polydopamine nanospheres with total recycle capacity Zhang XL, Jia X, Zhang GX, Hu JM, Sheng WB, Ma ZY, Lu JJ, Liu ZY |
174 - 179 |
Epitaxially grown polycrystalline silicon thin-film solar cells on solid-phase crystallised seed layers Li W, Varlamov S, Xue CW |
180 - 187 |
Synergetic effect of organic cores and inorganic shells for core/shell structured composite abrasives for chemical mechanical planarization Chen Y, Li ZN, Miao NM |
188 - 192 |
Band gap widening and d(0) ferromagnetism in epitaxial Li-doped Sno(2) films Wang JC, Zhou W, Wu P |
193 - 198 |
Nanotribological performance of fullerene-like carbon nitride films Flores-Ruiz FJ, Enriquez-Flores CI, Chinas-Castillo F, Espinoza-Beltran FJ |
199 - 207 |
Characterization and functionalities of Pd/hydrotalcite catalysts Naresh D, Kumar VP, Harisekhar M, Nagaraju N, Putrakumar B, Chary KVR |
208 - 214 |
Laser-assisted preparation and photoelectric properties of grating-structured Pt/FTO thin films Ren NF, Huang LJ, Li BJ, Zhou M |
215 - 220 |
High precision patterning of ITO using femtosecond laser annealing process Cheng CW, Lin CY |
221 - 227 |
In vitro biological response to the oxide layer in pure titanium formed at different current densities by plasma electrolytic oxidation Shin KR, Kim YS, Yang HW, Ko YG, Shin DH |
228 - 232 |
Facile synthesis of RGO/NiO composites and their excellent electromagnetic wave absorption properties Zhang H, Tian XY, Wang CP, Luo HL, Hu J, Shen YH, Xie AJ |
233 - 240 |
Electrochemical characteristics of a carbon fibre composite and the associated galvanic effects with aluminium alloys Liu Z, Curioni M, Jamshidi P, Walker A, Prengnell P, Thompson GE, Skeldon P |
241 - 250 |
Effect of wettability and surface roughness on ice-adhesion strength of hydrophilic, hydrophobic and superhydrophobic surfaces Bharathidasan T, Kumar SV, Bobji MS, Chakradhar RPS, Basu BJ |
251 - 259 |
Effect of preparation conditions on the characteristics and photocatalytic activity of TiO2/purified diatomite composite photocatalysts Sun ZM, Hu ZB, Yan Y, Zheng SL |
260 - 265 |
Effective immobilization of DNA for development of polypyrrole nanowires based biosensor Tran TL, Chu TX, Huynh DC, Pham DT, Luu THT, Mai AT |
266 - 272 |
One-step synthesis of a sulfur-graphene composite with enhanced photocatalytic performance Hu CY, Zheng SZ, Lian CJ, Chen F, Lu TW, Hu QH, Duo SW, Zhang RB, Guan CY |
273 - 279 |
Preparation of genosensor for detection of specific DNA sequence of the hepatitis B virus Castro ACH, Franca EG, de Paula LF, Soares MMCN, Goulart LR, Madurro JM, Brito-Madurro AG |
280 - 285 |
UV/ozone surface treatment increases hydrophilicity and enhances functionality of SU-8 photoresist polymer Delplanque A, Henry E, Lautru J, Leh H, Buckle M, Nogues C |
286 - 291 |
Simulating the growth process of aromatic polyamide layer by monomer concentration controlling method Jin Y, Liang SM, Wu ZC, Cai ZQ, Zhao N |
292 - 300 |
Surface studies on benzophenone doped PDMS microstructures fabricated using KrF excimer laser direct write lithography Kant MB, Shinde SD, Bodas D, Patil KR, Sathe VG, Adhi KP, Gosavi SW |
301 - 307 |
Straightforward approach to graft bioactive polysaccharides onto polyurethane surfaces using an ionic liquid Bigot S, Louarn G, Kebir N, Burel F |
308 - 313 |
Surface free energy of alkali and transition metal nanoparticles Aqra F, Ayyad A |
314 - 321 |
CO2 adsorption in amine-grafted zeolite 13X Bezerra DP, da Silva FWM, de Moura PAS, Sousa AGS, Vieira RS, Rodriguez-Castellon E, Azevedo DCS |
322 - 330 |
Loss of implanted heavy elements during annealing of ultra-shallow ion-implanted silicon: The complete picture Chan TK, Koh SY, Fang V, Markwitz A, Osipowicz T |
331 - 340 |
Practical approach in surface modification of biaxially oriented polypropylene films for gravure printability Nuntapichedkul B, Tantayanon S, Laohhasurayotin K |
341 - 347 |
Fabrication and characterization of modified-hydroxyapatite/polyetheretherketone coating materials Ma R, Fang L, Luo ZK, Zheng RS, Song SH, Weng LQ, Lei JP |
348 - 357 |
Antibacterial and bioactivity of silver substituted hydroxyapatite/TiO2 nanotube composite coatings on titanium Yan YJ, Zhang XJ, Huang Y, Ding QQ, Pang XF |
358 - 366 |
Effect of doping on the modification of polycrystalline silicon by spontaneous reduction of diazonium salts Girard A, Coulon N, Cardinaud C, Mohammed-Brahim T, Geneste F |
367 - 375 |
Surface modification of polymeric materials by cold atmospheric plasma jet Kostov KG, Nishime TMC, Castro AHR, Toth A, Hein LRO |
376 - 383 |
Theoretical and experimental study of the incorporation of tobramycin and strontium-ions into hydroxyapatite by means of co-precipitation Wang BC, Lilja M, Ma TR, Sorensen J, Steckel H, Ahuja R, Stromme M |
384 - 391 |
Hydrogen photochromism in V2O5 layers prepared by the sol-gel technology Wang Y, Pan L, Li Y, Gavrilyuk AI |
392 - 399 |
Characteristics and anticorrosion performance of Fe-doped TiO2 films by liquid phase deposition method Liu Y, Xu C, Feng ZD |
400 - 407 |
EXAFS study on yttrium oxide thin films deposited by RF plasma enhanced MOCVD under the influence of varying RF self-bias Chopade SS, Nayak C, Bhattacharyya D, Jha SN, Tokas RB, Sahoo NK, Patil DS |
408 - 414 |
Cu mesh's super-hydrophobic and oleophobic properties with variations in gravitational pressure and surface components for oil/water separation applications Guo W, Zhang Q, Xiao HB, Xu J, Li QT, Pan XH, Huang ZY |
415 - 425 |
Experimental study of pyrolytic boron nitride at high temperature with and without proton and VUV irradiations Balat-Pichelin M, Eck J, Heurtault S, Glenat H |
426 - 432 |
Effect of cationic surfactants on characteristics and colorimetric behavior of polydiacetylene/silica nanocomposite as time-temperature indicator Nopwinyuwong A, Kitaoka T, Boonsupthip W, Pechyen C, Suppakul P |
433 - 442 |
Low energy Cu clusters slow deposition on a Fe (001) surface investigated by molecular dynamics simulation Zhang SX, Gong HF, Chen XZ, Li GP, Wang ZG |
443 - 446 |
Effect of annealing temperature on formation of superparamagnetism in CoFeB/MgO/CoFeB magnetic tunnel junctions Cao JW, Liu Y, Ren Y, Wei FL, Freitas PP |
447 - 452 |
Effect of Na2SiO3 solution concentration of micro-arc oxidation process on lap-shear strength of adhesive-bonded magnesium alloys Gao HT, Zhang M, Yang X, Huang P, Xu KW |
453 - 457 |
Low temperature magneto-transport properties in bilayered magnetic anti-dot mircoarrays Deshpande NG, Hwang JS, Seo MS, Yoo YJ, Rhee JY, Kim KW, Shao YC, Chen KH, Pong WF, Lee YP |
458 - 463 |
Photocatalytic reduction of CO2 on MgO/TiO2 nanotube films Li QY, Zong LL, Li C, Yang JJ |
464 - 467 |
Polymer/porous GaN bulk heterojunction and its optoelectronic property Hu LF, Wang FX, Deng FX, Zhao Y, Pan GB |
468 - 475 |
The dependency of microstructure and mechanical properties of nanostructured alumina-titania coatings on critical plasma spraying parameter Wang HD, Ma JL, Li GL, Kang JJ, Xu BS |
476 - 480 |
Thermochromic VO2 on Zinnwaldite Mica by pulsed laser deposition Mathevula L, Ngom BD, Kotsedi L, Sechogela P, Doyle TB, Ghouti M, Maaza M |
481 - 489 |
BiOI nanosheets decorated TiO2 nanofiber: Tailoring water purification performance of photocatalyst in structural and photo-responsivity aspects Liao CX, Ma ZJ, Dong GP, Qiu JR |
490 - 499 |
Dominantly epitaxial growth of graphene on Ni (111) substrate Fogarassy Z, Rummeli MH, Gorantla S, Bachmatiuk A, Dobrik G, Kamaras K, Biro LP, Havancsak K, Labar JL |
500 - 504 |
Preparation and frictional investigation of the two-components silanes deposited on alumina surface Kosla K, Grobelny J, Cichomski M |
505 - 509 |
Efficient suppression of nanograss during porous anodic TiO2 nanotubes growth Gui QF, Yu DL, Li DD, Song Y, Zhu XF, Cao L, Zhang SY, Ma WH, You SY |
510 - 515 |
Chitosan/graphene oxide nanocomposite films with enhanced interfacial interaction and their electrochemical applications He LH, Wang HF, Xia GM, Sun J, Song R |
516 - 522 |
Effect of various additives on morphological and structural characteristics of pulse electrodeposited tin coatings from stannous sulfate electrolyte Sharma A, Das K, Fecht HJ, Das S |
523 - 529 |
One-pot synthesis of urchinlike Ni nanoparticles/RGO composites with extraordinary electromagnetic absorption properties Liu GZ, Jiang W, Sun DP, Wang YP, Li FS |
530 - 536 |
Geometric study of transparent superhydrophobic surfaces of molded and grid patterned polydimethylsiloxane (PDMS) Davaasuren G, Ngo CV, Oh HS, Chun DM |
537 - 545 |
Corrosion inhibition of Eleusine aegyptiaca and Croton rottleri leaf extracts on cast iron surface in 1 M HCl medium Rajeswari V, Kesavan D, Gopiraman M, Viswanathamurthi P, Poonkuzhali K, Palvannan T |
546 - 551 |
Ti/Al ohmic contacts on AlGaN/GaN heterostructures with different defect density Greco G, Iucolano F, Bongiorno C, Giannazzo F, Krysko M, Leszczynski M, Roccaforte F |
552 - 557 |
Synthesis of hollow silica nanosphere with high accessible surface area and their hybridization with carbon matrix for drastic enhancement of electrochemical property Alam MM, Yamahana H, Bastakoti BP, Luitel HN, Zhao WW, Yamauchi Y, Watari T, Noguchi H, Nakashima K |
558 - 563 |
Theoretical study of SO2 adsorption on goethite (110) surface Zubieta CE, Fortunato LF, Belelli PG, Ferullo RM |
564 - 569 |
Durability of nanostructured coatings based on PTFE nanoparticles deposited on porous aluminum alloy Ghalmi Z, Farzaneh M |
570 - 574 |
Properties of atomic-layer-deposited ultra-thin AIN films on GaAs surfaces Mattila P, Bosund M, Jussila H, Aierken A, Riikonen J, Huhtio T, Lipsanen H, Sopanen M |
575 - 580 |
Structural, energetic and electrical properties of boron nitride nanotubes interacting with DMMP chemical agent Ganji MD, Gholian M, Mohammadzadeh S |
581 - 585 |
Synthesis and characterization of AlTiSiN/CrSiN multilayer coatings by cathodic arc ion-plating Yang B, Tian CX, Wan Q, Yan SJ, Liu HD, Wang RY, Li ZG, Chen YM, Fu DJ |
586 - 591 |
Evolution of kinetically controlled In-induced surface structure on Si(557) surfacee Chauhan AKS, Eldose NM, Mishra M, Niazi A, Nair L, Gupta G |
592 - 598 |
Gadolinium doped cerium oxide for soot oxidation: Influence of interfacial metal-support interactions Durgasri DN, Vinodkumar T, Lin FJ, Alxneit I, Reddy BM |
599 - 602 |
Voltage-driven hysteretic changes in magnetization in multiferroic Co/BTO composite thin films Shu L, Hu JM, Gao Y, Wu L, Ma J, Lin YH, Nan CW |
603 - 609 |
Mechanical and interfacial properties of poly(vinyl chloride) based composites reinforced by cassava stillage residue with different surface treatments Zhang YJ, Gan T, Li Q, Su JM, Lin Y, Wei YZ, Huang ZQ, Yang M |
610 - 621 |
Box-counting methods to directly estimate the fractal dimension of a rock surface Ai T, Zhang R, Zhou HW, Pei JL |
622 - 627 |
Strong enhancement flux pinning in MOD-YBa2Cu3O7-x, films with self-assembled BaTiO3 nanocolumns Ding FZ, Gu HW, Zhang T, Wang HY, Qu F, Qiu QQ, Dai ST, Peng XY, Cao JL |
628 - 632 |
The influence on magnetic property of nickel nanoparticles deposited on the silicon nanowires arrays at low temperature Wang ZL, Yin HH, Chen YH, Guo XL, Zhang XF, Song CQ, Zhang J |
633 - 637 |
Microfabrication of electroluminescent polymer for devices construction Estevam-Alves R, Ferreira PHD, Almeida GFB, Sousa WS, Mendonca CR |
638 - 641 |
Performance enhancement of dye-sensitized solar cells by incorporating graphene sheets of various sizes Satapathi S, Gill HS, Das S, Li L, Samuelson L, Green MJ, Kumar J |
642 - 654 |
Immobilisation of an antibacterial drug to Ti6Al4V components fabricated using selective laser melting Vaithilingam J, Kilsby S, Goodridge RD, Christie SDR, Edmondson S, Hague RJM |
655 - 662 |
Selective adsorption of Cr(VI) from aqueous solution by EDA-Fe3O4 nanoparticles prepared from steel pickling waste liquor Fang XB, Fang ZQ, Tsang PKE, Cheng W, Yan XM, Zheng LC |
663 - 669 |
Facile synthesis and characterization of trimesic acid-Cu based metal organic frameworks Sahiner N, Sel K, Ozturk OF, Demirci S, Terzi G |
670 - 678 |
Cell growing on ion implanted polytetrafluorethylene Kondyurina I, Shardakov I, Nechitailo G, Terpugov V, Kondyurin A |
679 - 685 |
A low-cost, high-efficiency and high-flexibility surface modification technology for a black bisphenol A polycarbonate board Wang SH, Liu JG, Lv M, Zeng XY |
686 - 696 |
Impact of chlorinated disinfection on copper corrosion in hot water systems Montes JC, Hamdani F, Creus J, Touzain S, Correc O |
697 - 703 |
Reversible immobilization of BSA on Cu-chelated PAMAM dendrimer modified iron oxide nanoparticles Demir M, Senel M, Baykal A |
704 - 710 |
Morphology and microstructure of picene thin-films for air-operating transistors Diallo AK, Kurihara R, Yoshimoto N, Videlot-Ackermann C |
711 - 719 |
Synthesis and characterization of thick PZT films via sol-gel dip coating method Shakeri A, Abdizadeh H, Golobostanfard MR |
720 - 724 |
Overhanging ferroelectric nanodot arrays created by high surface energy seeds Kim J, Park KW, Hong J, No K |
725 - 734 |
Oxygen vacancy promoted CO oxidation over Pt/CeO2 catalysts: A reaction at Pt-CeO2 interface Liu HH, Wang Y, Jia AP, Wang SY, Luo MF, Lu JQ |
735 - 745 |
Correlation between microstructure evolution and high temperature properties of TiAlSiN hard coatings with different Si and Al content Chen T, Xie ZW, Gong F, Luo ZZ, Yang Z |
746 - 753 |
Cobalt nanoparticles-embedded magnetic ordered mesoporous carbon for highly effective adsorption of rhodamine B Tang L, Cai Y, Yang GD, Liu YY, Zeng GM, Zhou YY, Li SS, Wang JJ, Zhang S, Fang Y, He YB |
754 - 759 |
Facile fabrication of superhydrophobic surfaces with low roughness on Ti-6Al-4V substrates via anodization Gao YZ, Sun YW, Guo DM |
760 - 767 |
Microstructure and wear properties of Al2O3-CeO2/Ni-base alloy composite coatings on aluminum alloys by plasma spray He L, Tan YF, Wang XL, Xu T, Hong X |
768 - 776 |
Corrosion mechanism of 13Cr stainless steel in completion fluid of high temperature and high concentration bromine salt Liu Y, Xu LN, Lu MX, Meng Y, Zhu JY, Zhang L |
777 - 785 |
High temperature passive film on the surface of Co-Cr-Mo alloy and its tribological properties Guo FF, Dong GN, Dong LS |
786 - 793 |
Wide-spectrum Mg and Ga co-doped ZnO-TCO thin films with introduced hydrogen grown by magnetron sputtering at room temperature Tian CS, Chen XL, Liu JM, Zhang DK, Wei CC, Zhao Y, Zhang XD |
794 - 799 |
A comparative DFT study of the structural and electronic properties of nonpolar GaN surfaces Gonzalez-Hernandez R, Gonzalez-Garcia A, Barragan-Yani D, Lopez-Perez W |
800 - 806 |
Core-level photoemission from nanocluster-matrix composites: Au clusters in amorphous carbon Calliari L, Minati L, Speranza G, Paris A, Baranov A, Fanchenko S |
807 - 814 |
Tailoring of UV/violet plasmonic properties in Ag, and Cu coated Al concaves arrays Norek M, Wlodarski M, Stepniowski WJ |
815 - 821 |
Graphene-poly(vinyl alcohol) composites: Fabrication, adsorption and electrochemical properties Wang N, Chang PR, Zheng PW, Ma XF |
822 - 831 |
Pulse electrochemical machining on Invar alloy: Optical microscopic/SEM and non-contact 3D measurement study of surface analyses Kim SH, Choi SG, Choi WK, Yang BY, Lee ES |
832 - 840 |
Synthesis of a novel multi N-halamines siloxane precursor and its antimicrobial activity on cotton Wu L, Xu Y, Cai L, Zang X, Li ZX |
841 - 844 |
The atomic structure of Pt on Si(111) studied by scanning tunneling microscopy Gao M, Pan Y, Xu WY, Huang L, Wang YL, Lin Y, Gao HJ |
845 - 849 |
Effect of crystal orientation in Cu(In,Ga)Se-2 fabricated by multi-layer precursor method on its cell performance Chantana J, Watanabe T, Teraji S, Kawamura K, Minemoto T |
850 - 857 |
Synchrotron-based XPS studies of AlGaN and GaN surface chemistry and its relationship to ion sensor behaviour Khir FLM, Myers M, Podolska A, Sanders TM, Baker MV, Nener BD, Parish G |
858 - 863 |
Light extraction enhancement from organic light-emitting diodes with randomly scattered surface fixture Zhou DY, Shi XB, Gao CH, Cai SD, Jin Y, Liao LS |
864 - 871 |
Plasmonic TiO2/AgBr/Ag ternary composite nanosphere with heterojunction structure for advanced visible light photocatalyst Dai K, Li DP, Lu LH, Liu Q, Liang CH, Lv JL, Zhu GP |
872 - 876 |
High quality ZnO-TiO2 core-shell nanowires for efficient ultraviolet sensing Shao DL, Sun HT, Xin GQ, Lian J, Sawyer S |
877 - 887 |
Influence of Cd2+/S2- molar ratio and of different capping environments in the optical properties of CdS nanoparticles incorporated within a hybrid diureasil matrix Goncalves LFFF, Silva CJR, Kanodarwala FK, Stride JA, Pereira MR, Gomes MJM |
888 - 895 |
Study of the formation process of titanium oxides containing micro arc oxidation film on Mg alloys Song YW, Dong KH, Shan DY, Han EH |
896 - 905 |
Theoretical calculations on the adhesion, stability, electronic structure and bonding of SiC/W interface Jin N, Yang YQ, Luo X, Li J, Huang B, Liu S, Xiao ZY |
906 - 909 |
Fabrication of superhydrophobic surface on zinc substrate by 3-trifluoromethylbenzene diazonium tetrafluoroborate salts Li H, Huang CY, Zhang L, Lou WQ |
910 - 918 |
Li-N doped and codoped TiO2 thin films deposited by dip-coating: Characterization and photocatalytic activity under halogen lamp Hamden Z, Boufi S, Conceicao DS, Ferraria AM, do Rego AMB, Ferreira DP, Ferreira LFV, Bouattour S |
919 - 930 |
Effect of reaction conditions on methyl red degradation mediated by boron and nitrogen doped TiO2 Galenda A, Crociani L, El Habra N, Favaro M, Natile MM, Rossetto G |
931 - 935 |
Excellent acetone sensing properties of Sm-doped alpha-Fe2O3 Su C, Liu CB, Liu L, Ni MC, Li HY, Bo XQ, Liu LL, Chi X |
936 - 941 |
Electrochemical performance and kinetic behavior of lithium ion in Li4Ti5O12 thin film electrodes Deng JQ, Lu ZG, Chung CY, Han XD, Wang ZM, Zhou HY |
942 - 955 |
Analytical and numerical depth resolution functions in sputter profiling Hofmann S, Liu Y, Wang JY, Kovac J |
956 - 966 |
Ionic liquids influence on the surface properties of electron beam irradiated wood Croitoru C, Patachia S, Doroftei F, Parparita E, Vasile C |
967 - 972 |
Effects of bioglass powders with and without mesoporous structures on fibroblast and osteoblast responses Shih CJ, Lu PS, Hsieh CH, Chen WC, Chen JC |
973 - 982 |
An atomistic study of growth mode and microstructure evolution of amorphous carbon films by different incident carbon atoms Xue C, Zhou JQ |
983 - 990 |
Nanoscale ionic graphene material with liquid-like behavior in the absence of solvent Li PP, Zheng YP, Wu YW, Qu P, Yang RL, Zhang AB |
991 - 999 |
Fabrication of polyimide-based nanocomposites containing functionalized graphene oxide nanosheets by in-situ polymerization and their properties Qian Y, Lan YF, Xu JP, Ye FC, Dai SZ |
1000 - 1006 |
Hydrothermal synthesis of NiCo2O4 nanowires/nitrogen-doped graphene for high-performance supercapacitor Yu M, Chen JP, Ma YX, Zhang JD, Liu JH, Li SM, An JW |
1007 - 1018 |
Microstructural characterization and some mechanical properties of gas-borided Inconel 600-alloy Makuch N, Kulka M |
1019 - 1025 |
Characterization of chemically and enzymatically treated hemp fibres using atomic force microscopy and spectroscopy George M, Mussone PG, Abboud Z, Bressler DC |
1026 - 1033 |
Solution combustion method for synthesis of nanostructured hydroxyapatite, fluorapatite and chlorapatite Zhao JJ, Dong XC, Bian MM, Zhao JF, Zhang Y, Sun Y, Chen JH, Wang XH |
1034 - 1040 |
Crystalline ha coating on peek via chemical deposition Almasi D, Izman S, Assadian M, Ghanbari M, Kadir MRA |
1041 - 1046 |
Competitive graphitization and diamond growth on hot-dip aluminized carbon steel substrate Li YS, Ma HT, Yang LZ, Zhang CZ, Feng RF, Yang Q, Hirose A |
1047 - 1052 |
Effect of residual H2O on epitaxial AN film growth on 4H-SiC by alternating doses of TMA and NH3 Perng YC, Kim T, Chang JP |
1053 - 1062 |
The evaluation of hierarchical structured superhydrophobic coatings for the alleviation of insect residue to aircraft laminar flow surfaces Kok M, Young TM |
1063 - 1069 |
Preparation and characterization of multi-carboxyl-functionalized silica gel for removal of Cu (II), Cd (II), Ni (II) and Zn (II) from aqueous solution Li M, Li MY, Feng CG, Zeng QX |
1070 - 1073 |
Molecular beam deposition and polymerization of parylene-N ultrathin films: Effective buffers in organic light emitting diodes Hu YM, Li RH, He Y, Zhang XQ, Li MQ, Zhu Y, Yi JH, Fu RC |
1074 - 1081 |
Trajectory effect on the properties of large area ZnO thin films deposited by atmospheric pressure plasma jet Juang JY, Chou TS, Lin HT, Chou YF, Weng CC |
1082 - 1086 |
Electrical properties of SAM-modified ITO surface using aromatic small molecules with double bond carboxylic acid groups for OLED applications Can M, Havare AK, Aydin H, Yagmurcukardes N, Demic S, Icli S, Okur S |
1087 - 1092 |
Solubility limit of carbon in Rh measured by graphene growth on the surface Rut'kov EV, Gall NR |
1093 - 1093 |
Measuring the adhesion of alumina coatings onto Fecralloy supports using a mechanical testing system (Retraction of vol 259, pg 338, 2012) Adegbite SA |