1 - 7 |
The interface quality of Ge nanoparticles grown in thick silica matrix Dasovic J, Dubcek P, Pucic I, Bernstorff S, Radic N, Pivac B |
8 - 17 |
Synthesis and magnetic properties of inverted core-shell polyaniline-ferrite composite Donescu D, Fierascu RC, Ghiurea M, Manaila-Maximean D, Nicolae CA, Somoghi R, Spataru CI, Stanica N, Raditoiu V, Vasile E |
18 - 24 |
Isothermal and cyclic oxidation resistance of pack siliconized Mo-Si-B alloy Majumdar S |
25 - 33 |
Stable configurations of graphene on silicon Javvaji B, Shenoy BM, Mahapatra DR, Ravikumar A, Hegde GM, Rizwan MR |
34 - 40 |
Novel electronic properties of a new MoS2/TiO2 heterostructure and potential applications in solar cells and photocatalysis Li YH, Cai CZ, Gu YH, Cheng WD, Xiong W, Zhao CJ |
41 - 51 |
Experimental observation of zinc dialkyl dithiophosphate (ZDDP)-induced iron sulphide formation Soltanahmadi S, Morina A, van Eijk MCP, Nedelcu I, Neville A |
52 - 62 |
Fabrication and durable antibacterial properties of 3D porous wet electrospun RCSC/PCL nanofibrous scaffold with silver nanoparticles Zhang M, Lin H, Wang YL, Yang G, Zhao H, Sun DH |
63 - 67 |
Surface microstructures and corrosion resistance of Ni-Ti-Nb shape memory thin films Li K, Li Y, Huang X, Gibson D, Zheng Y, Liu J, Sun L, Fu YQ |
68 - 72 |
Facile fabrication of plate-shaped hydrohausmannite as electrode material for supercapacitors Liang J, Chai Y, Li DL, Li M, Lu JX, Li L, Luo M |
73 - 81 |
Combination of mechanical and chemical pre-treatments to improve nitriding efficiency on pure iron Lacaille V, Peres V, Langlade C, Morel C, Feulvarch E, Bergheau JM, Kermouche G |
82 - 91 |
Influence of Ce3+ doping on molecular organization of Si-based organic/inorganic sol-gel layers for corrosion protection Fedel M, Callone E, Fabbian M, Deflorian F, Dire S |
92 - 100 |
Carbon disulfide (CS2) adsorption and dissociation on the Cu(100) surface: A quantum chemical study Wang WJ, Fan LL, Wang GP |
101 - 106 |
Electronic properties of graphene with single vacancy and Stone-Wales defects Zaminpayma E, Razavi ME, Nayebi P |
107 - 113 |
Surface modification of epoxy resin using He/CF4 atmospheric pressure plasma jet for flashover withstanding characteristics improvement in vacuum Chen SL, Wang S, Wang YB, Guo BH, Li GQ, Chang ZS, Zhang GJ |
114 - 123 |
Structure and morphology of magnetron sputter deposited ultrathin ZnO films on confined polymeric template Singh A, Schipmann S, Mathur A, Pal D, Sengupta A, Klemradt U, Chattopadhyay S |
124 - 130 |
Effect of the structure distortion on the high photocatalytic performance of C-60/g-C3N4 composite Ma XJ, Li XR, Li MM, Ma XC, Yu L, Dai Y |
131 - 139 |
Fe-doped CeO2 solid solutions: Substituting-site doping versus interstitial-site doping, bulk doping versus surface doping Bao HZ, Qian K, Fang J, Huang WX |
140 - 146 |
Na role during sulfurization of NaF/Cu/SnS2 stacked precursor for formation of Cu2SnS3 thin film as absorber of solar cell Suzuki K, Chantana J, Minemoto T |
147 - 152 |
Surface modification of BMN particles with silane coupling agent for composites with PTFE Qi YY, Luo Q, Shen J, Zheng L, Zhou J, Chen W |
153 - 162 |
N-2 emission in steady-state N2O + CO and NO plus CO reactions on Ir(110) by means of angle-resolved desorption Matsushima T, Kokalj A |
163 - 170 |
Combined surface activated bonding using H-containing HCOOH vapor treatment for Cu/Adhesive hybrid bonding at below 200 degrees C He R, Fujino M, Akaike M, Sakai T, Sakuyama S, Suga T |
171 - 187 |
Cobalt nanoparticles for biomedical applications: Facile synthesis, physiochemical characterization, cytotoxicity behavior and biocompatibility Ansari SM, Bhor RD, Pai KR, Sen D, Mazumder S, Ghosh K, Kolekar YD, Ramana CV |
188 - 196 |
Contact angle and droplet heat transfer during evaporation on structured and smooth surfaces of heated wall Misyura SY |
197 - 204 |
Enhancing thermoelectric properties of Sb2Te3 flexible thin film through microstructure control and crystal preferential orientation engineering Shen SF, Zhu W, Deng Y, Zhao HZ, Peng YC, Wang CJ |
205 - 211 |
Femtosecond pulsed laser ablation in microfluidics for synthesis of photoluminescent ZnSe quantum dots Yang C, Feng GY, Dai SY, Wang ST, Li G, Zhang H, Zhou SH |
212 - 217 |
Epitaxial growth of ZnO nanorod arrays via a self-assembled microspheres lithography Lin BC, Ku CS, Lee HY, Wu AT |
218 - 223 |
Three-dimensional polypyrrole-derived carbon nanotube framework for dye adsorption and electrochemical supercapacitor Xin SC, Yang N, Gao F, Zhao J, Li L, Teng C |
224 - 229 |
Effects of plasma treatment time on surface characteristics of indium-tin-oxide film for resistive switching storage applications Chen PH, Chang TC, Chang KC, Tsai TM, Pan CH, Shih CC, Wu CH, Yang CC, Chen WC, Lin JC, Wang MH, Zheng HX, Chen MC, Sze SM |
230 - 237 |
Long-term antibacterial characteristics and cytocompatibility of titania nanotubes loaded with Au nanoparticles without photocatalytic effects Wang GM, Feng HQ, Jin WH, Gao A, Peng X, Li W, Wu H, Li Z, Chu PK |
238 - 243 |
One-step synthesis of nitrogen-doped carbon nanodots for ratiometric pH sensing by femtosecond laser ablation method Xu HH, Yan LH, Nguyen V, Yu Y, Xu YM |
244 - 250 |
Effect of layer number on recovery rate of WS2 nanosheets for ammonia detection at room temperature Qin ZY, Zeng DW, Zhang J, Wu CY, Wen YW, Shan B, Xie CS |
251 - 261 |
Enhanced visible light photocatalytic activity of copper-doped titanium oxide-zinc oxide heterojunction for methyl orange degradation Dorraj M, Alizadeh M, Sairi NA, Basirun WJ, Goh BT, Woi PM, Alias Y |
262 - 269 |
Reduced water vapor transmission rates of low-temperature solution-processed metal oxide barrier films via ultraviolet annealing Park S, Jeong YJ, Baek Y, Kim LH, Jang JH, Kim Y, An TK, Nam S, Kim SH, Jang J, Park CE |
270 - 276 |
Microwave assisted hydrothermal synthesis of Ni1.5Co1.5S4 as high-performance electrode material for lithium storage Yuan DX, Wang XX, Yin DM, Liang F, Wang LM |
277 - 291 |
Effects of phosphorus-doping on energy band-gap, structural, surface, and photocatalytic characteristics of emulsion-based sol-gel derived TiO2 nano-powder Ganesh I |
292 - 302 |
Surface modification of knit polyester fabric for mechanical, electrical and UV protection properties by coating with graphene oxide, graphene and graphene/silver nanocomposites Ouadil B, Cherkaoui O, Safi M, Zahouily M |
303 - 312 |
Sulfur amino acids and alanine on pyrite (100) by X-ray photoemission spectroscopy: Surface or molecular role? Sanchez-Arenillas M, Galvez-Martinez S, Mateo-Marti E |
313 - 324 |
Modification of wetting property of Inconel 718 surface by nanosecond laser texturing Yang Z, Tian YL, Yang CJ, Wang FJ, Liu XP |
325 - 334 |
Facile preparation of SERS and catalytically active Au nanostructures using furfuryl derivatives Kim KJ, Kim HC, Park M, Huh S |
335 - 344 |
RF magnetron sputtering of a hydroxyapatite target: A comparison study on polytetrafluorethylene and titanium substrates Surrnenev RA, Surmeneva MA, Grubova IY, Chernozem RV, Krause B, Baumbach T, Loza K, Epple M |
345 - 352 |
Catalytic hydrolysis of COS over CeO2 (110) surface: A density functional theory study Song X, Ning P, Wang C, Li K, Tang LH, Sun X |
353 - 360 |
Facile fabrication of gold coated nickel nanoarrays and its excellent catalytic performance towards sodium borohydride electro-oxidation Ma XK, Ye K, Wang G, Duan MY, Cheng K, Wang GL, Cao DX |
361 - 364 |
Kinetic Monte Carlo study on the evolution of silicon surface roughness under hydrogen thermal treatment Wang G, Wang Y, Wang JZ, Pan LJ, Yu LW, Zheng YD, Shi Y |
365 - 372 |
Synergetic effects of I- ions and BiOI on visible-light-activity enhancement of wide-band-gap (BiO)(2)CO3 Liang L, Cao J, Lin HL, Guo XM, Zhang MY, Chen SF |
373 - 379 |
Dielectric properties of ligand-modified gold nanoparticle/SU-8 photopolymer based nanocomposites Toor A, So H, Pisano AP |
380 - 389 |
Epoxy based oxygen enriched porous carbons for CO2 capture Tiwari D, Bhunia H, Bajpai PK |
390 - 397 |
Determination of NH2 concentration on 3-aminopropyl tri-ethoxy silane layers and cyclopropylamine plasma polymers by liquid-phase derivatization with 5-iodo 2-furaldehyde Manakhov A, Cechal J, Michlicek M, Shtansky DV |
398 - 404 |
Cobalt-phthalocyanine-derived ultrafine Co3O4 nanoparticles as high-performance anode materials for lithium ion batteries Wang HG, Zhu YJ, Yuan CP, Li YH, Duan Q |
405 - 412 |
Adsorption of Zn(II) on the kaolinite(001) surfaces in aqueous environment: A combined DFT and molecular dynamics study Wang Q, Kong XP, Zhang BH, Wang J |
413 - 423 |
Temperature and solution assisted synthesis of anisotropic ZnO nanostructures by pulsed laser ablation Navas MP, Soni RK, Tarasenka N, Tarasenko N |
424 - 434 |
Enhancement of p-nitrophenol adsorption capacity through N-2-thermal-based treatment of activated carbons Alvarez-Torrellas S, Martin-Martinez M, Gomes HT, Ovejero G, Garcia J |
435 - 441 |
Functionalizable self-assembled trichlorosilyl-based monolayer for application in biosensor technology De la Franier B, Jankowski A, Thompson M |