| 351 - 387 |
Efficient thermal desalination technologies with renewable energy systems:A state-of-the-art review
Esfahani IJ, Rashidi J, Ifaei P, Yoo CK |
| 388 - 400 |
Recent trends in environmentally friendly water-borne polyurethane coatings: A review
Noreen A, Zia KM, Zuber M, Tabasum S, Saif MJ |
| 401 - 404 |
Facile route to multi-walled carbon nanotubes under ambient conditions
Ha H, Jeong SH |
| 405 - 415 |
A design procedure for heat-integrated distillation column sequencing of natural gas liquid fractionation processes
Yoo H, Binns M, Jang MG, Cho H, Kim JK |
| 416 - 422 |
Globally stable control systems for processes with input multiplicities
Lee J, Edgar TF |
| 423 - 437 |
Simultaneous multi-objective optimization of a new promoted ethylene dimerization catalyst using grey relational analysis and entropy measurement
Mahdaviani SH, Parvari M, Soudbar D |
| 438 - 447 |
Dynamic modeling of fixed-bed adsorption of flue gas using a variable mass transfer model
Park J, Lee JW |
| 448 - 455 |
Flocculation and viscoelastic behavior of industrial papermaking suspensions
Nasser MS, Al-Marri MJ, Benamor A, Onaizi SA, Khraisheh M, Saad MA |
| 456 - 464 |
Graphene-ZnO nanocomposite for highly efficient photocatalytic degradation of methyl orange dye under solar light irradiation
Posa VR, Annavaram V, Koduru JR, Ammireddy VR, Somala AR |
| 465 - 472 |
Catalytic application of metallic iron from the dyeing sludge ash for benzene steam reforming reaction in tar emitted from biomass gasification
Nam SB, Park YS, Yun YS, Gu JH, Sung HJ, Horio M |
| 473 - 480 |
High temperature water gas shift reaction over Fe-Cr-Cu nanocatalyst fabricated by a novel method
Latifi SM, Salehirad A |
| 481 - 489 |
Adsorption and photocatalytic degradation of organic dyes onto crystalline and amorphous hydroxyapatite: Optimization, kinetic and isotherm studies
Valizadeh S, Rasoulifard MH, Dorraji MSS |
| 490 - 499 |
COx-free hydrogen and carbon nanofibers production by methane decomposition over nickel-alumina catalysts
Bayat N, Rezaei M, Meshkani F |
| 500 - 506 |
CO hydrogenation to higher alcohols over Ni- and Mo-modified Cu/CeO2 catalyst
Chen J, Li W, Shen R |
| 507 - 513 |
Oxidation of ash-free coal from sub-bituminous and bituminous coals in a direct carbon fuel cell
Vu DL, Lee CG |
| 514 - 526 |
Properties of LiNi0.8Co0.1Mn0.1O2 as a high energy cathode material for lithium-ion batteries
Vu DL, Lee JW |
| 527 - 531 |
Energy efficiency of a scaled-up microwave-assisted transesterification for biodiesel production
Kim D, Seol SK, Chang WS |
| 532 - 538 |
Degradation of azo dye C.I. Acid Red 18 using an eco-friendly and continuous electrochemical process
Rahmani AR, Godini K, Nematollahi D, Azarian G, Maleki S |
| 539 - 546 |
Photocatalytic degradation of azo dye using nano-ZrO2/UV/Persulfate: Response surface modeling and optimization
Moradi M, Ghanbari F, Manshouri M, Angali KA |
| 547 - 552 |
Enhanced electrokinetic remediation of fluorine-contaminated soil by applying an ammonia continuous circulation system
Zhu S, Zhou M, Zhang S |
| 553 - 558 |
Adsorption properties of Friedel’s salt for the nitrate in the landfill
Yao J, Kong Q, Zhu H, Shen D, Zhang Z |
| 559 - 566 |
Simultaneous removal of Cr(VI) and phenol from synthetic binary solution using consortium culture of Bacillus sp. and E. coli immobilized on tea waste biomass in packed bed reactor
Gupta A, Balomajumder C |
| 567 - 575 |
Characterization, isotherm and kinetic study of Phaseolus vulgaris husk as an innovative adsorbent for Cr(VI) removal
Srivastava S, Agrawal SB, Mondal MK |
| 576 - 581 |
Effective removal of anilines using porous activated carbon based on ureaformaldehyde resin
An FQ, Zhang D, Yue XX, Ou GL, Gao JF, Hu TP |
| 582 - 586 |
Esterification of acetic and oleic acids within the Amberlyst 15 packed catalytic column
Khan JA, Jamal Y, Shahid A, Boulanger BO'N |
| 587 - 593 |
CO2 fixation and lipid production by microalgal species
Parupudi P, Kethineni C, Dhamole PB, Vemula S, Allu PR, Botlagunta M, Kokilagadda S, Ronda SR |
| 594 - 602 |
Preparation of polyphenol fine particles potent antioxidants by a supercritical antisolvent process using different extracts of Olea europaea leaves
Chinnarasu C, Montes A, Pereyra C, Casas L, Fernandez-Ponce MT, Mantell C, Pattabhi S, de la Ossa EM |
| 603 - 609 |
Synergetic effect of biomass mixture on pyrolysis kinetics and biocrude-oil characteristics
Soysa R, Choi YS, Choi SK, Kim SJ, Han SY |
| 610 - 615 |
A facile technique to prepare cross-linked enzyme aggregates of bovine pancreatic lipase using bovine serum albumin as an additive
Cui JD, Liu RL, Li LB |
| 616 - 622 |
Preparation of nanoporous activated carbon and its application as nano adsorbent for CO2 storage
Rashidi AM, Kazemi D, Izadi N, Pourkhalil M, Jorsaraei A, Ganji E, Lotfi R |
| 623 - 628 |
Impact of seed loading ratio on the growth kinetics of mono-ammonium phosphate under isothermal batch crystallization
Long B, Yang H, Ding Y |
| 629 - 637 |
Fabrication of poly(ether sulfone) based mixed matrix membranes modified by TiO2 nanoparticles for purification of biodiesel produced from waste cooking oils
Halek FS, Farahani SK, Hosseini SM |
| 638 - 648 |
Sorption of Cr(VI) by MgAl-NO3 hydrotalcite in fixed-bed column:Experiments and prediction of breakthrough curves
Khitous M, Salem Z, Halliche D |
| 649 - 656 |
Kinetic model for sorption of divalent heavy metal ions on low cost minerals
Chawla A, Prasad M, Goswami R, Ranshore S, Kulshreshtha A, Sinha ASK |
| 657 - 665 |
CO2/CH4 separation with poly(4-methyl-1-pentyne) (TPX) based mixed matrix membrane filled with Al2O3 nanoparticles
Nematollahi MH, Dehaghani AHS, Abedini R |
| 666 - 668 |
1-Methyl-3-octylimidazolium tetrafluoroborate/AgO nanoparticles composite membranes for facilitated gas transport
Ji D, Kang SW |
| 669 - 677 |
Polypyrrole-polyaniline/Fe3O4 magnetic nanocomposite for the removal of Pb(II) from aqueous solution
Afshar A, Sadjadi SAS, Mollahosseini A, Eskandarian MR |
| 678 - 682 |
Controlling the morphology of the active layer by using additives and its effect on bulk hetero-junction solar cell performance
Pham VHT, Truong NTN, Trinh TK, Lee SH, Park C |
| 683 - 687 |
Synthesis of rare earth oxide nanoplates with single unit cell thickness using a thermal decomposition method
Jung E, Yu T, Kim WS |
| 688 - 696 |
Characteristics of LiFePO4/C composite prepared by sonochemical method under multibubble sonoluminescence
Kang KM, Kim HW, Kwak HY |
| 697 - 706 |
Oxidative conversion of anilines to azobenzenes with alkaline chloramine-T
Manjunatha AS, Dakshayani S, Vaz N, Puttaswamy |
| 707 - 710 |
Effects of composition and layer thickness of a butyl acrylate/acrylic acid copolymer on the adhesion properties
Ghim D, Kim JH |
| 711 - 719 |
Synthesis and characterization of a new polymeric surfactant for chemical enhanced oil recovery
Babu K, Pal N, Saxena VK, Mandal A |
| 720 - 725 |
Enhanced adsorption of fluoride from aqueous solutions by hierarchically structured Mg-Al LDHs/Al2O3 composites
Zhang T, Yu H, Zhou Y, Rong J, Mei Z, Qiu F |
| 726 - 734 |
Characteristics of pressure drop during the pulse-jet cleaning of a ceramic filter for high temperature and high pressure
Kim JH, Kim YC, Choi JH |
