| 947 - 954 |
Multivariate monitoring for time-derivative non-Gaussian batch process
Kim MH, Yoo CK |
| 955 - 965 |
Data reconciliation: Development of an object-oriented software tool
Farzi A, Mehrabani-Zeinabad A, Boozarjomehry RB |
| 966 - 971 |
Effect of alumina nanoparticles in the fluid on heat transfer in double-pipe heat exchanger system
Chun BH, Kang HU, Kim SH |
| 972 - 979 |
Model predictive control of condensate recycle process in a cogeneration power station: Controller design and numerical application
Won W, Lee KS, Kim IS, Lee B, Lee S, Lee S |
| 980 - 981 |
Thermal decomposition kinetics of 5-fluorouracil from thermogravimetric analysis
Liu QY, Bei YL, Qi GB, Ding YJ |
| 982 - 986 |
Alkylation of isobutane and butene using chloroaluminate imidazolium ionic liquid as catalyst: Effect of organosulfur compound additive
Zhang J, Huang C, Chen B, Li J, Li Y |
| 987 - 997 |
Effect of Ni in palladium β-zeolite on hydroisomerization of n-decane
Karthikeyan D, Lingappan N, Sivasankar B |
| 998 - 1003 |
Application of KF/MgO as a heterogeneous catalyst in the production of biodiesel from rapeseed oil
Wan T, Yu P, Gong S, Li Q, Luo Y |
| 1004 - 1007 |
Synthesis of cyclic carbonate from allyl glycidyl ether and CO2 over silica-supported ionic liquid catalysts prepared by sol-gel method
Lee MK, Shim HL, Dharman MM, Kim KH, Park SW, Park DW |
| 1008 - 1013 |
Synthesis of isoamyl salicylate using a novel mesoporous titania superacid as a catalyst
Zhao Q, Chu J, Jiang T, Yin H |
| 1014 - 1017 |
Synthesis of superacidic mesoporous alumina and its application in the dehydration of glycerol
Yang L, Joo JB, Kim YJ, Oh S, Kim ND, Yi J |
| 1018 - 1021 |
Effect of reaction conditions on the catalytic performance of H3PW12O40 heteropolyacid catalyst in the direct preparation of dichloropropanol from glycerol in a liquid-phase batch reactor
Lee SH, Park DR, Kim H, Lee J, Jung JC, Woo SY, Song WS, Kwon MS, Song IK |
| 1022 - 1025 |
Nitrogen requirement for the mesophilic and thermophilic upflow anaerobic filters of a simulated papermill wastewater
Ahn JH |
| 1026 - 1030 |
Formic acid oxidation by carbon-supported palladium catalysts in direct formic acid fuel cell
Choi JH, Noh SY, Han SD, Yoon SK, Lee CS, Hwang TS, Rhee YW |
| 1031 - 1035 |
Cobalt(III)-mediated oxidative destruction of phenol using divided electrochemical cell
Matheswaran M, Chung SJ, Moon IS |
| 1036 - 1039 |
Optimization of organic bi-layer solar cell through systematic study of anode treatment and material thickness
Kim YW, Monroe ML, Seol J, Truong NTN, Cho SM, Anderson TJ, Park C |
| 1040 - 1046 |
Zirconium mesostructures immobilized in calcium alginate for phosphate removal
Yeon KH, Park H, Lee SH, Park YM, Lee SH, Iwamoto M |
| 1047 - 1053 |
Thermogravimetric characteristics and kinetic study of biomass co-pyrolysis with plastics
Chattopadhyay J, Kim C, Kim R, Pak D |
| 1054 - 1059 |
Autothermal reforming of methane to syngas with palladium catalysts and an electric metal monolith heater
Koo K, Yoon J, Lee C, Joo H |
| 1060 - 1064 |
Removal of Basic Blue 3 from aqueous solution by Corynebacterium glutamicum biomass: Biosorption and precipitation mechanisms
Mao J, Won SW, Min J, Yun YS |
| 1065 - 1069 |
A simple unstructured model-based control for efficient expression of recombinant porcine insulin precursor by Pichia pastoris
Hang HF, Chen W, Guo MJ, Chu J, Zhuang YP, Zhang S |
| 1070 - 1075 |
Effect of thermal pretreatment on recovery of nickel and cobalt from Sukinda lateritic nickel ore using microorganisms
Mohapatra S, Sengupta C, Nayak BD, Sukla LB, Mishra BK |
| 1076 - 1081 |
Synthesis and characterization of a novel soil stabilizer based on biodegradable poly(aspartic acid) hydrogel
Yang J, Wang F, Tan T |
| 1082 - 1087 |
Multiple-copy-gene integration on chromosome of Escherichia coli for beta-galactosidase production
Chen HT, Lin MS, Hou SY |
| 1088 - 1093 |
Xylitol fermentation by Candida subtropicalis WF79 immobilized in polyacrylic hydrogel films
Liaw WC, Chang WS, Chen KP, Chen YF, Chen CS |
| 1094 - 1102 |
A CFD model for predicting the flow patterns of viscous fluids in a bioreactor under various operating conditions
Um BH, Hanley TR |
| 1103 - 1109 |
Lipid body formation by Thraustochytrium aureum (ATCC 34304) in response to cell age
Jeh EJ, Kumaran RS, Hur BK |
| 1110 - 1114 |
A fermentation strategy for production of recombinant protein subjected to plasmid instability
Chen SJ, Ke BS, Chiu IC |
| 1115 - 1119 |
Fabrication of functional biomolecular layer using recombinant technique for the bioelectronic device
Kim SU, Kim YJ, Yea CH, Min J, Choi JW |
| 1120 - 1124 |
Determination of meaty peptide in enzymatic hydrolyzate of beef protein by HPLC-MS
Zeng S, Wang Y, Bai X, Lin W, Yang M, Xing H |
| 1125 - 1130 |
Analysis and comparison of cloning methods for the preparation of repetitive polypeptides
Chu HS, Choi CY, Won JI |
| 1131 - 1135 |
Characterization of thiosulfate-oxidizing Enterobacter hormaechei JH isolated from barnyard manure
Kim SH, Kim IH, Lee WJ, Lee JH |
| 1136 - 1139 |
Effects of di-(2-ethylhexyl) phthalate (DEHP) released from laboratory equipments
Nguyen DH, Nguyen DTM, Kim EK |
| 1140 - 1144 |
Adsorption characteristics of bamboo activated carbon
Kim BK, Kim YH, Yamamoto T |
| 1145 - 1150 |
Effects of magnetic field on calcium carbonate precipitation: Ionic and particle mechanisms
Saksono N, Gozan M, Bismo S, Krisanti E, Widaningrum R, Song SK |
| 1151 - 1153 |
Electrochemical characterization of phosphonic acid cation exchange membrane prepared by plasma-induced graft polymerization
Choi EY, Moon SH |
| 1154 - 1159 |
Adsorption characteristics of binary vapors among acetone, MEK, benzene, and toluene
Lee SW, Cheon JK, Park HJ, Lee MG |
| 1160 - 1164 |
Excess molar enthalpies for the binary and ternary mixtures of ether compounds (di-isopropyl ether, di-butyl ether, propyl vinyl ether) with ethanol and isooctane at 298.15K
Kim MG, Park SJ, Hwang IC |
| 1165 - 1169 |
The development of a high functional continuous filtration system for sericite powders
Choi H, Bayanjargal O, Tsubaki J, Mori T, Sugimoto T, Lee JE |
| 1170 - 1177 |
Hydrodynamic characteristics of activated carbon in air- and water-fluidized beds
Ujhidy A, Bucsky G, Nemeth J |
| 1178 - 1183 |
Development of novel two-interconnected fluidized bed system
Ryu HJ, Park YC, Jo SH, Park MH |
| 1184 - 1189 |
Epitaxial growth of GaN on (0001) Al2O3 via solution-cast seed layer formation process using Ga(mDTC)3
Kim DH, Farva U, Jung WS, Kim EJ, Park C |
| 1190 - 1194 |
Surface modification of polypropylene by nitrogen-containing plasma
Jung JS, Myung SW, Choi HS |
| 1195 - 1200 |
Preparation and barrier property of poly(vinyl alcohol)/SiO2 hybrid coating films
Kim SW |
| 1201 - 1204 |
Fabrication of ethyl cellulose microspheres: Chitosan solution as a stabilizer
Li XW, Yang TF |
| 1205 - 1207 |
Preparation of CeO2-ZrO2 mixed oxide with high surface area and high thermal stability
Zhang D |
| 1208 - 1211 |
Fracture behavior of carbon/epoxy laminated composite reinforced by iron powder
Choi H, Huang H, Kim DU, Joe CR |
| 1212 - 1220 |
Improvement of polymer electrolyte membrane by radiation-induced grafting of styrene onto FEP film with subsequent sulfonation
Kim BN, Lee DH, Lee SW, Han DH |
| 1221 - 1225 |
Liposomes incorporating hydrophobically modified glucose oxidase
Jo SM, Xia Y, Lee HY, Kim YC, Kim JC |
| 1226 - 1231 |
Preparation of graphite composite bipolar plate for PEMFC
Bhlapibul S, Pruksathorn K |
| 1232 - 1238 |
Photocatalytic degradation of methylene blue and acetaldehyde by TiO2/glaze coated porous red clay tile
Yoo SJ, Lee SI, Kwak DH, Kim KG, Hwang KJ, Lee JW, Hwang UY, Park HS, Kim JO |
