화학공학소재연구정보센터
홈 로그인 로그아웃 연락처 사이트맵
Applied Chemistry for Engineering, Vol.28, No.1, 80-86, February, 2017
DOI10.14478/ace.2016.1111  Export Citation
질소가 도핑 된 흑연섬유 발열체의 제조 및 발열특성
Preparation and Heating Characteristics of N-doped Graphite Fiber as a Heating Element
김민지, 이경민, 이상민, 여상영1, 최석순2, 이영석†
  • 충남대학교 응용화학공학과
  • 1한국생산기술연구원
  • 2세명대학교 바이오환경공학과
Min-Ji Kim, Kyeong Min Lee, Sangmin Lee, Sang Young Yeo1, Suk Soon Choi2, and Young-Seak Lee†
  • Department of Applied Chemistry and Biological Engineering, Chungnam National University, Daejeon 34134, Korea
  • 1Korea Institute of Industrial Technology (KITECH), Ansan 15588, Korea
  • 2Department of Biological and Environmental Engineering, Semyung University, Jecheon 27136, Korea
E-mail:
초록
본 연구에서는 흑연섬유(GF)의 전기적 특성을 변화시키기 위하여 질소관능기 도입을 실시하였고, 처리조건에 따라 흑연섬유의 발열성능을 평가하였다. 흑연섬유는 200 °C에서 2 h 동안 열-고상반응법으로 처리되었다. 질소도핑 된 흑연섬유의 표면특성은 XPS로 조사되었으며, 저항 및 발열온도는 전위계 시스템과 열화상카메라를 이용하여 측정하였다. XPS 결과 우레아 함량이 증가함에 따라 흑연섬유 표면의 질소관능기가 증가하였으며, 이 질소관능기가 도입됨에 따라서 흑연섬유의 발열특성이 또한 향상되었다. 우레아 처리된 흑연섬유의 최대 발열온도는 60 V에서 53.8 °C로 나타났으며, 이는 미처리 흑연섬유와 비교하여 발열특성이 약 55% 향상됨을 알 수 있었다. 이러한 효과는 열고상반응법에 의해서 흑연섬유 표면에 도입된 질소관능기 때문에 기인한 것으로, 이는 흑연섬유의 열적 특성에 상당히 영향을 주었다.
In this study, nitrogen functional groups were introduced on graphite fiber (GF) to modify their electrical properties, and heating properties were investigated according to the treatment conditions. GF was prepared by a thermal solid-state reaction at 200 °C for 2 h. Surface properties of the nitrogen doped GF were examined by XPS, and its resistance and heating temperature were measured using a programmable electrometer and thermo-graphic camera, respectively. The XPS result showed that the nitrogen functional groups on the GF surface were increased with increasing of urea contents, and the heating property of the GF was also improved as nitrogen functional groups were introduced. The maximum heating temperature of GF treated by urea was 53.8 °C at 60 V, which showed 55% improved heating characteristics compared to that of non-treated GF. We ascribe this effect to introduced nitrogen functional groups on the GF surface by thermal solid-state reaction, which significantly affects the heating characteristics of GF.
Keywords:graphite fiber;heating element;resistance heating properties;urea treatment
  1. Suh YC, Seo BS, Song JK, Cho NH, J. Korean Soc. Road Eng., 15, 19 (2013)
  2. Han KI, Cho DH, Lee AH, J. Korean Soc. Power Syst. Eng., 10, 34 (2006)
  3. Rees SJ, Spitler JD, Xiao X, ASHRAE Trans., 108, 406 (2002)
  4. Kim JH, Kim JH, Lee GT, Korean J. Air-Cond. Refrig. Eng., 6, 1251 (2009)
  5. Choi DI, Hwang KI, J. Korean Sol. Energy Soc., 32, 138 (2012)
  6. Choi DI, Kim JH, Hwang KI, Trans. Korea Soc. Geotherm. Energy Eng., 8, 7 (2012)
  7. Kim YH, Lee JW, Park CW, Park SJ, J. Ocean Eng. Technol., 28, 351 (2014)
  8. Ahn HJ, Kim SH, Choi SK, J. Korea Inst. Build. Constr., 16, 247 (2016)
  9. Choi KE, Park CH, Seo MK, Appl. Chem. Eng., 27(2), 210 (2016)
  10. Chu K, Yun DJ, Kim D, Park H, Park SH, Org. Electron., 15, 2734 (2014)
  11. Jee MH, Lee JH, Lee IS, Baik DH, Text. Sci. Eng., 50, 108 (2013)
  12. Kim M, Kong K, Kim N, Park HW, Park O, Park YB, Jung M, Lee SH, Kim SG, J. Korean Soc. Compos. Mater., 26, 72 (2013)
  13. Athanasopoulos N, Kostopoulos V, Compos. Sci. Technol., 72, 1273 (2012)
  14. Zantout AE, Zhupanska OI, Compos. Pt. A-Appl. Sci. Manuf., 41, 1719 (2010)
  15. Rudolf R, Mitschang P, Neitzel M, Compos. Pt. A-Appl. Sci. Manuf., 31, 1191 (2000)
  16. Pyo D, Eom S, Lee YS, Ryu S, Korean Chem. Eng. Res., 49(2), 218 (2011)
  17. Kim BJ, Choi WK, Um MK, Park SJ, Surf. Coat. Technol., 205, 3416 (2011)
  18. Park MS, Yun KJ, Lee YS, Appl. Chem. Eng., 25(6), 613 (2014)
  19. Liu Y, Chen TQ, Lu T, Sun Z, Chua DHC, Pan LK, Electrochim. Acta, 158, 403 (2015)
  20. Rasines G, Lavela P, Macias C, Zafra MS, Tirado JL, Parra JB, Ania CO, Carbon, 82, 262 (2015)
  21. Yang JJ, Choi YJ, Kim HJ, Yuk YJ, Park SG, J. Korean Electrochem. soc., 16, 65 (2013)
  22. Kim JH, Cho S, Bae TS, Lee YS, Sens. Actuators B-Chem., 197, 20 (2014)
  23. Mou ZG, Chen XY, Du YK, Wang XM, Yang P, Wang SD, Appl. Surf. Sci., 258(5), 1704 (2011)
  24. Sun L, Wang L, Tian C, Tan T, Xie Y, Shi K, Li M, Fu H, RSC Adv., 2, 4498 (2012)
  25. Kim J, Kwon YK, Lee JK, Choi HS, Korean Chem. Eng. Res., 50(6), 1043 (2012)
  26. Kim MJ, Jung MJ, Choi SS, Lee YS, Appl. Chem. Eng., 26(4), 432 (2015)
  27. Diez N, Alvarez P, Granda M, Blanco C, Santamaria R, Menendez R, Microporous Mesoporous Mater., 201, 10 (2015)
  28. Chen JJ, Zhai YB, Chen HM, Li CT, Zeng GM, Pang DX, Lu P, Appl. Surf. Sci., 263, 247 (2012)
  29. Kim Y, Cho S, Park SK, Jeon JD, Lee YS, Appl. Chem. Eng., 25(3), 292 (2014)
  30. Seredych M, Hulicova-Jurcakova D, Lu GO, Bandosz TJ, Carbon, 46, 1475 (2008)
  31. Lim JW, Jeong E, Jung MJ, Lee SI, Lee YS, J. Ind. Eng. Chem., 18(1), 116 (2012)
  32. Shao YY, Wang XQ, Engelhard M, Wang CM, Dai S, Liu J, Yang ZG, Lin YH, J. Power Sources, 195(13), 4375 (2010)
  33. Kim ND, Kim W, Joo JB, Oh S, Kim P, Kim Y, Yi J, J. Power Sources, 180(1), 671 (2008)
  34. Kim JW, Choi YS, Lee KS, Cho SY, Hwang JS, J. Korean Inst. Electr. Electron. Mater. Eng., 24, 654 (2011)
  35. Park HJ, Yun MS, Chung CS, J. Korean Inst. Illum. Electr. Install. Eng., 19, 39 (2005)