1 - 10 |
Performance of Zn-Fe-Mn/MCM-48 sorbents for high temperature H2S removal and analysis of regeneration process Huang ZB, Liu BS, Wang F, Amin R |
11 - 16 |
Annealing effect: Controlled modification of the structure, composition and plasmon resonance of hybrid Au-Ag/C nanostructures Manshina A, Povolotskiy A, Povolotckaia A, Kireev A, Petrov Y, Tunik S |
17 - 23 |
Promotion of Nb2O5 on the wustite-based iron catalyst for ammonia synthesis Han WF, Huang SL, Cheng TH, Tang HD, Li Y, Liu HZ |
24 - 28 |
Influence of alkylphosphonic acid grafting on the electronic and magnetic properties of La2/3Sr1/3MnO3 surfaces Galbiati M, Tatay S, Delprat S, Barraud C, Cros V, Jacquet E, Coloma F, Choueikani F, Otero E, Ohresser P, Haag N, Cinchetti M, Aeschlimann M, Seneor P, Mattana R, Petroff F |
29 - 39 |
Characteristics of oxide scale formed on Cu-bearing austenitic stainless steel during early stages of high temperature oxidation Swaminathan S, Krishna NG, Kim DI |
40 - 47 |
Biomimetic calcium phosphate coating of additively manufactured porous CoCr implants Lindahl C, Xia W, Engqvista H, Snis A, Lausmaa J, Palmquist A |
48 - 53 |
Effect of oxygen pressure on preferential orientation, microstructure and functional properties of Bi1.5MgNb1.5O7 thin films prepared by pulsed laser deposition Yu SH, Li LX, Zheng HR, Sun Z, Zhang WF |
54 - 62 |
Characterisation of carbon nanotube pastes for field emission using their sheet resistances Floweri O, Kim J, Seo Y, Park JY, Lee N |
63 - 70 |
Growth graphene on silver-copper nanoparticles by chemical vapor deposition for high-performance surface-enhanced Raman scattering Zhang XM, Xu SC, Jiang SZ, Wang JH, Wei J, Xu SD, Gao SB, Liu HP, Qiu HW, Li Z, Liu HL, Li ZH, Li HS |
71 - 78 |
Synthesis of hierarchical SnO2 nanoflowers with enhanced acetic acid gas sensing properties Jin WX, Ma SY, Tie ZZ, Li WQ, Luo J, Cheng L, Xu XL, Wang TT, Jiang XH, Mao YZ |
79 - 86 |
Hydrothermal synthesis porous silicon/tungsten oxide nanorods composites and their gas-sensing properties to NO2 at room temperature Wei YL, Hu M, Yan WJ, Wang DF, Yuan L, Qin YX |
87 - 94 |
Hydrothermal synthesis of CdS/Bi2MoO6 heterojunction photocatalysts with excellent visible-light-driven photocatalytic performance Feng Y, Yan X, Liu CB, Hong YZ, Zhu L, Zhou MJ, Shi WD |
95 - 102 |
Novel CuCr2O4 embedded CuO nanocomposites for efficient photodegradation of organic dyes Mageshwari K, Sathyamoorthy R, Lee JY, Park J |
103 - 105 |
Growth of vertically oriented InN nanorods from In-rich conditions on unintentionally patterned sapphire substrates Terziyska PT, Butcher KSA, Rafailov P, Alexandrov D |
106 - 111 |
Theoretical and experimental analysis on effect of porous silicon surface treatment in multicrystalline silicon solar cells Khezami L, Al Megbel AO, Jemai AB, Ben Rabha M |
112 - 117 |
Effects of nanoparticles size and concentration and laser power on nonlinear optical properties of Au and Au-CdSe nanocrystals Salah A, Mansour A, Mohamed MB, Azzouz IM, Elnaby S, Badr Y |
118 - 126 |
RGO/InVO4 hollowed-out nanofibers: Electrospinning synthesis and its application in photocatalysis Ma D, Zhang YX, Gao MC, Xin YJ, Wu J, Bao N |
127 - 136 |
Direct decomposition of methane over Pd promoted Ni/SBA-15 catalysts Pudukudy M, Yaakob Z, Akmal ZS |
137 - 149 |
On the mechanism of apatite-induced precipitation on 45S5 glass pellets coated with a natural-derived polymer Araujo M, Miola M, Bertone E, Baldi G, Perez J, Verne E |
150 - 157 |
The effect of anatase TiO2 surface structure on the behavior of ethanol adsorption and its initial dissociation step: A DFT study Zhang RG, Liu ZX, Ling LX, Wang BJ |
158 - 164 |
Effects of surface chemical properties of activated carbon fibers modified by liquid oxidation for CO2 adsorption Bai BC, Kim EA, Lee CW, Lee YS, Im JS |
165 - 172 |
Adsorption of nucleotides on biomimetic apatite: The case of adenosine 5' monophosphate (AMP) Hammami K, El Feki H, Marsan O, Drouet C |
173 - 183 |
Experimental and theoretical studies of xanthan gum and its graft co-polymer as corrosion inhibitor for mild steel in 15% HCl Biswas A, Pal S, Udayabhanu G |
184 - 188 |
Surface modification of low-carbon nano-crystallite bainite via laser remelting and following isothermal transformation Xing XL, Zhou YF, Yang YL, Gao SY, Ren XJ, Yang QX |
189 - 199 |
Controlled electrophoretic deposition of HAp/beta-TCP composite coatings on piranha treated 316L SS for enhanced mechanical and biological properties Ananth KP, Nathanael AJ, Jose SP, Oh TH, Mangalaraj D, Ballamurugan AM |
200 - 208 |
Evaluation of the kinetic and relaxation time of gentamicin sulfate released from hybrid biomaterial Bioglass-chitosan scaffolds Wers E, Oudadesse H, Lefeuvre B, Merdrignac-Conanec O, Barroug A |
209 - 213 |
Effect of ammonia etching on structural and electrical properties of Cu2ZnSn(S,Se)(4) absorbers Hironiwa D, Takai R, Chantana J, Sakai N, Kato T, Sugimoto H, Minemoto T |
214 - 223 |
Oxidation behavior of 2D C/SiC composites coated with multi-layer SiC/Si-B-C/SiC coatings under wet oxygen atmosphere Liu YS, Wan JJ, Zuo XZ, Cheng LF, Zhang LT |
224 - 231 |
Polyhedral oligomeric silsesquioxanes/carbon nanotube/carbon fiber multiscale composite: Influence of a novel hierarchical reinforcement on the interfacial properties Zhang RL, Wang CG, Liu L, Cui HZ, Gao B |
232 - 237 |
Sn doping in thermoelectric Bi2Te3 films by metal-organic chemical vapor deposition Kim KC, Kwon B, Kim HJ, Baek SH, Hyun DB, Kim SK, Kim JS |
238 - 244 |
Surface modification of an epoxy resin with polyamines and polydopamine: Adhesion toward electroless deposited copper Schaubroeck D, Mader L, Dubruel P, Vanfleteren J |
245 - 253 |
Internal oxidation of laminated ternary Ru-Ta-Zr coatings Chen YI, Lu TS |
254 - 262 |
The improvement of corrosion resistance of fluoropolymer coatings by SiO2/poly(styrene-co-butyl acrylate) nanocomposite particles Chen L, Song RG, Li XW, Guo YQ, Wang C, Jiang Y |
263 - 268 |
(ZnS)x(Cu0.1InS1.55) heteronanocrystals with broadband emission as a single component for potential WLEDs Lu SH, Huang HZ, Wang YS, Chen TF, Wang AJ, Zheng D |
269 - 274 |
Fabrication of hierarchically structured superhydrophobic PDMS surfaces by Cu and CuO casting Migliaccio CP, Lazarus N |
275 - 283 |
Efficient application of nano-TiO2 thin films in the photocatalytic removal of Alizarin Yellow from aqueous solutions Tiwari D, Lalhriatpuia C, Lalhmunsiama, Lee SM, Kong SH |
284 - 290 |
Characteristics of laser ultrasound interaction with multi-layered dissimilar metals adhesive interface by numerical simulation Zhang KS, Zhou ZG, Zhou JH, Sun GK |
291 - 299 |
Statistical characteristics of surface integrity by fiber laser cutting of Nitinol vascular stents Fu CH, Liu JF, Guo A |
300 - 306 |
Graphene assistance enhanced dye-sensitized solar cell performance of tin sulfide microspheres Yang B, Chen P, Zuo XQ, Zhou L, Yang X, Li G, Wu MZ, Ma YQ, Jin SW, Zhu KR |
307 - 316 |
Solvothermal fabrication of activated semi-coke supported TiO2-rGO nanocomposite photocatalysts and application for NO removal under visible light Yang WW, Li CH, Wang L, Sun SN, Yan X |
317 - 325 |
The effect of nanoparticles size on photocatalytic and antimicrobial properties of Ag-Pt/TiO2 photocatalysts Zielinska-Jureka A, Wei Z, Wysocka I, Szweda P, Kowalska E |
326 - 332 |
Tribological characteristics of monodispersed cerium borate nanospheres in biodegradable rapeseed oil lubricant Chen BS, Gu KC, Fang JH, Wu J, Wang J, Zhang N |
333 - 337 |
Metallization and stiffness of the Li-intercalated MoS2 bilayer Petrova NV, Yakovkin IN, Zeze DA |
338 - 341 |
Water repellent spray-type encapsulation of quantum dot light-emitting diodes using super-hydrophobic self-assembled nanoparticles Han J, Bong J, Lim T, Lee KH, Yang H, Ju S |
342 - 349 |
Effect of polydimethylsiloxane (PDMS) coating on TiO2-based MALDI matrix for dimethyl methylphosphonate (DMMP) analysis Park EJ, Han SW, Jeong B, Park SH, Kim YG, Kim YH, Kim YD |
350 - 362 |
Synthesis and characterization of ultrasound assisted "graphene oxide-magnetite" hybrid, and investigation of its adsorption properties for Sr(II) and Co(II) ions Tayyebi A, Outokesh M, Moradi S, Doram A |
363 - 375 |
Structural evolution of chitosan-palygorskite composites and removal of aqueous lead by composite beads Rusmin R, Sarkar B, Liu YJ, McClure S, Naidu R |
376 - 381 |
Preparation, characterization, and catalytic activity of zirconocene bridged on surface of silica gel El Majdoub L, Shi YS, Yuan Y, Zhou AN, Abutartour A, Xu QH |
382 - 390 |
Finite element analysis of the effect of the controlled parameters on plate forming induced by ultrasonic impact forming (UIF) process Guo CB, Hu SS, Wang DP, Wang ZJ |
391 - 399 |
Visible light driven Ag/Ag3PO4/AC photocatalyst with highly enhanced photodegradation of tetracycline antibiotics Wang HQ, Ye ZF, Liu C, Li JZ, Zhou MJ, Guan QF, Lv P, Huo PW, Yan YS |
400 - 404 |
Formation of periodic ripples through excitation of similar to 1 mu m spot using femtosecond-laser Bessel beam on c-Si Sugawara R, Sekiguchi S, Yagi T |
405 - 413 |
Microstructure and properties of the low-power-laser clad coatings on magnesium alloy with different amount of rare earth addition Zhu RD, Li ZY, Li XX, Sun Q |
414 - 418 |
Band alignment at the Cu2SnS3/In2S3 interface measured by X-ray photoemission spectroscopy Jia HJ, Cheng SY, Zhang H, Yu JL, Lai YF |
419 - 424 |
Structural and chemical characterization of novel NixZn1-xGa2O4 nanocatalysts at atomic resolution Xu Q, Wu ZC, Hong JH, Chang XF, Li XJ, Yan SC, Wang P |
425 - 432 |
Oxidation and sensing of ascorbic acid and dopamine on self-assembled gold nanoparticles incorporated within polyaniline film Chu WY, Zhou Q, Li SS, Zhao W, Li N, Zheng JW |
433 - 438 |
Iron and iron oxide nanoparticles obtained by ultra-short laser ablation in liquid De Bonis A, Lovaglio T, Galasso A, Santagata A, Teghil R |
439 - 448 |
Synthesis and characterization of boron antimonide films by pulsed laser deposition technique Das S, Bhunia R, Hussain S, Bhar R, Chakraborty BR, Pal AK |
449 - 458 |
Tuning the morphology of metastable MnS films by simple chemical bath deposition technique Dhandayuthapani T, Girish M, Sivakumar R, Sanjeeviraja C, Gopalakrishnan R |
459 - 468 |
Study of hafnium oxide thin films deposited by RF magnetron sputtering under glancing angle deposition at varying target to substrate distance Haque SM, Rao KD, Misal JS, Tokas RB, Shinde DD, Ramana JV, Rai S, Sahoo NK |
469 - 479 |
Hydrothermal synthesis of fluorinated anatase TiO2/reduced graphene oxide nanocomposites and their photocatalytic degradation of bisphenol A Luo LJ, Yang Y, Zhang A, Wang M, Liu YJ, Bian LC, Jiang FZ, Pan XJ |
480 - 488 |
Prepare core-multishell CdSe/ZnS nanocrystals with pure color and controlled emission by tri-n-octylphosphine-assisted method Ren CL, Hao JJ, Chen HL, Wang K, Wu D |
489 - 493 |
Magnetization reorientation induced by interfacial structures in ultrathin disordered FePt film sandwiched by SiO2 layers Yang G, Zhang JY, Wang SG, Jiang SL, Zhao YC, Ma QD, Wang C, Dong BW, Liu JL, Zhang Y, Sun Y, Wu ZL, Yu GH |
494 - 498 |
Grain size effect on indentation of nanocrystalline copper Huang CC, Chiang TC, Fang TH |
499 - 503 |
Interpolymer complexes of poly(acrylic acid) and poly(ethylene glycol) for low dishing in STI CMP Seo J, Moon J, Moon S, Paik U |
504 - 511 |
Role of Y in the oxidation resistance of CrAlYN coatings Dominguez-Meister S, El Mrabet S, Escobar-Galindo R, Mariscal A, de Haro CJ, Justo A, Brizuela M, Rojas TC, Sanchez-Lopez JC |
512 - 521 |
Investigating and understanding the effects of multiple femtosecond laser scans on the surface topography of stainless steel 304 and titanium Ling EJY, Said J, Brodusch N, Gauvin R, Servio P, Kietzig AM |
522 - 529 |
Further improving the mechanical and tribological properties of low content Ti-doped DLC film by W incorporating Gao KX, Zhang LF, Wang J, Zhang B, Zhang JY |
530 - 539 |
Degradation of modified carbon black/epoxy nanocomposite coatings under ultraviolet exposure Ghasemi-Kahrizsangi A, Shariatpanahi H, Neshati J, Akbarinezhad E |
540 - 547 |
Study of metal specific interaction, F-LUMO and VL shift to understand interface of CuPc thin films and noble metal surfaces Sinha S, Mukherjee M |
548 - 552 |
The effect of periodic magnetic field on the fabrication and field emission properties of nanocrystalline diamond films Long HY, Li SS, Luo H, Wang YJ, Wei QP, Yu ZM |
553 - 563 |
Simple hydrothermal synthesis of metal oxides coupled nanocomposites: Structural, optical, magnetic and photocatalytic studies Ganeshraja AS, Clara AS, Rajkumar K, Wang YJ, Wang Y, Wang JH, Anbalagan K |
564 - 567 |
Effect of droplet size on wetting behavior on laser textured SiC surface Wang R, Bai SX |
568 - 573 |
Hierarchical micro/nanostructures generated by femtosecond laser beams modified through a liquid-crystal spatial light modulator Chen YD, Tsai WJ, Liu SH, Horng JB |
574 - 579 |
Pressure-dependent electrolytic conduction of track-etched single conical nanopore Zhu XR, Wang L, Wang CM, Jiao Z, Wang WD, Qin GY, Xue JM |
580 - 587 |
Reduced graphene oxide/ZnO nanohybrids: Metallic Zn powder induced one-step synthesis for enhanced photocurrent and photocatalytic response Song N, Fan HQ, Tian HL |
588 - 593 |
As-4 overpressure effects on the phase purity of cubic GaN layers grown on GaAs substrates by RF-MBE Casallas-Moreno YL, Gallardo-Hernandez S, Ruiz-Zepeda F, Monroy BM, Hernandez-Hernandez A, Herrera-Gomez A, Escobosa-Echavarria A, Santana G, Ponce A, Lopez-Lopez M |
594 - 599 |
Conductive polymer/reduced graphene oxide/Au nano particles as efficient composite materials in electrochemical supercapacitors Shayeh JS, Ehsani A, Ganjali MR, Norouzi P, Jaleh B |
600 - 607 |
Polarization dependent micro-structuring of silicon with a femtosecond laser Al-Khazraji H, Bhardwaj VR |
608 - 614 |
Electroless silver plating on PET fabric initiated by in situ reduction of polyaniline Mu SP, Xie HY, Wang W, Yu D |
615 - 627 |
Comparison microstructure and sliding wear properties of nickel-cobalt/CNT composite coatings by DC, PC and PRC current electrodeposition Karslioglu R, Akbulut H |
628 - 635 |
Tuning the surface morphology of self-assembled graphene-like thin films through pH variation Alfe M, Gargiulo V, Di Capua R |
636 - 642 |
Wetting transition of the ordered nanoporous matrix layer under impact and static pressure Xue J, Su PB, Dong WW, Jiang XQ, Chen QM, Wang QJ |
643 - 650 |
Tribological performance of Mg/Al/Ce layered double hydroxides nanoparticles and intercalated products as lubricant additives Li S, Qin HJ, Zuo RF, Bai ZM |
651 - 661 |
Rational control on floating catalysts for the growth of carbon nanotube assemblies: From vertically aligned carbon nanotube arrays to carbon nanotube films Chen HY, Chen MH, Zhang YY, Li QW |
662 - 669 |
Adsorptions of SO2, SOF2, and SO2F2 on Pt-modified anatase (101) surface: Sensing mechanism study Zhang XX, Chen QC, Hu WH, Zhang JB |
670 - 678 |
Molecular dynamics study of oil detachment from an amorphous silica surface in water medium Chen JX, Si H, Chen WY |
679 - 685 |
Understanding the dispersion of Ag on high surface area TiO2 supports using XPS intensity ratios Davis ZD, Tatarchuk BJ |
686 - 692 |
Laser and pyrolysis removal of fluorinated ethylene propylene thin layers applied on EN AW-5251 aluminium substrates Guerrero GR, Sevilla L, Soriano C |
693 - 699 |
Valence band structure of PDMS surface and a blend with MWCNTs: A UPS and MIES study of an insulating polymer Schmerl NM, Khodakov DA, Stapleton AJ, Ellis AV, Andersson GG |
700 - 707 |
Femtosecond laser ablation and nanoparticle formation in intermetallic NiAl Jorgensen DJ, Titus MS, Pollock TM |
708 - 713 |
Characterization of carbon contamination under ion and hot atom bombardment in a tin-plasma extreme ultraviolet light source Dolgov A, Lopaev D, Lee CJ, Zoethout E, Medvedev V, Yakushev O, Bijkerk F |
714 - 722 |
Synthesis of single-crystal-like TiO2 hierarchical spheres with exposed {101} and {111} facets via lysine-inspired method Zheng ZY, Wang ZF, Xie LY, Fang ZB, Feng WH, Huang ML, Liu P |
723 - 727 |
Preparation of methoxyl poly(ethylene glycol) (MPEG)-coated carbonyl iron particles (CIPs) and their application in potassium dihydrogen phosphate (KDP) magnetorheological finishing (MRF) Ji F, Xu M, Wang BR, Wang C, Li XY, Zhang YF, Zhou M, Huang W, Wei QL, Tang GP, He JG |
728 - 734 |
Effect of W-Ti target composition on the surface chemistry and electronic structure of WO3-TiO2 films made by reactive sputtering Vargas M, Lopez DM, Murphy NR, Grant JT, Ramana CV |
735 - 743 |
Photoinduced switchable wettability of bismuth coating with hierarchical dendritic structure between superhydrophobicity and superhydrophilicity Su CP, Lu Z, Zhao HP, Yang H, Chen R |
744 - 749 |
Effect of hydrogen flow on growth of 3C-SiC heteroepitaxial layers on Si(111) substrates Yan GG, Zhang F, Niu YX, Yang F, Liu XF, Wang L, Zhao WS, Sun GS, Zeng YP |
750 - 756 |
Detection and analysis of SERS effect of nano gold by self-assembly chemical plating composite method Wang CY, Xu Y, Zhao HZ, Gang C, Lai CH, Liao X, Wang R |
757 - 763 |
Topographic characterization of the self-assembled nanostructures of chitosan on mica surface by atomic force microscopy Wang L, Wu JF, Guo Y, Gong CC, Song YH |
764 - 773 |
Subsurface mechanical damage during bound abrasive grinding of fused silica glass Blaineau P, Andre D, Laheurte R, Darnis P, Darbois N, Cahuc O, Neauport J |
774 - 780 |
Effects of Ni-W(Au) coated Cu microcones on the bonding interfaces Hu FT, Wang HZ, Yang S, Hu AM, Li M |
781 - 787 |
Modeling and experimental study of oil/water contact angle on biomimetic micro-parallel-patterned self-cleaning surfaces of selected alloys used in water industry Nickelsen S, Moghadam AD, Ferguson JB, Rohatgi P |
788 - 792 |
Three-dimensional microporous polypyrrole/polysulfone composite film electrode for supercapacitance performance Feng XJ, Shi YL, Jin SP |
793 - 803 |
The influence of gold nanoparticles on the conductivity response of SnO2-based thin film gas sensors Korotcenkov G, Brinzari V, Gulina LB, Cho BK |
804 - 810 |
Fabrication and wettability of monolithic bimodal porous Cu with Gasar macro-pores and dealloying nano-pores Du M, Zhang HW, Li YX, Liu Y, Chen X, He Y |
811 - 819 |
Optimization of process factors for self-healing vanadium-based conversion coating on AZ31 magnesium alloy Li K, Liu JY, Lei T, Xiao T |
820 - 828 |
A theoretical view of 1,3-butadiene selective hydrogenation toward cis-2-butene on Pd-Ni layered catalyst Gomez G, Belelli PG, Cabeza GF, Castellani NJ |
829 - 834 |
Formation of hydrated layers in PMMA thin films in aqueous solution Akers PW, Nelson ARJ, Williams DE, McGillivray DJ |
835 - 842 |
Porous Zn-doped TiO2 nanowall photoanode: Effect of Zn2+ concentration on the dye-sensitized solar cell performance Saad SKM, Umar AA, Abd Rahman MY, Salleh MM |
843 - 850 |
Wettability of modified silica layers deposited on glass support activated by plasma Terpilowski K, Rymuszka D, Goncharuk OV, Sulym IY, Gun'ko VM |
851 - 855 |
Influence of accumulation effects on heating of silicon surface by femtosecond laser pulses Guk I, Shandybina G, Yakovlev E |
856 - 864 |
Flotation performances and adsorption mechanism of alpha-hydroxyoctyl phosphinic acid to cassiterite Li FX, Zhong H, Zhao G, Wang S, Liu GY |
865 - 872 |
Ag-loaded TiO2/reduced graphene oxide nanocomposites for enhanced visible-light photocatalytic activity Vasilaki E, Georgaki I, Vernardou D, Vamvakaki M, Katsarakis N |
873 - 881 |
The surface modifications of multi-walled carbon nanotubes for multi-walled carbon nanotube/poly(ether ether ketone) composites Cao ZS, Qiu L, Yang YZ, Chen YK, Liu XG |
882 - 889 |
novel collector 2-ethyl-2-hexenoic hydroxamic acid: Flotation performance and adsorption mechanism to ilmenite Xu HF, Zhong H, Tang Q, Wang S, Zhao G, Liu GY |
890 - 901 |
1-Dodecanethiol based highly stable self-assembled monolayers for germanium passivation Cai Q, Xu BJ, Ye L, Di ZF, Huang SL, Du XW, Zhang JS, Jin QH, Zhao JL |
902 - 912 |
First-principles investigation of the activation of CO2 molecule on TM/Cu (TM = Fe, Co and Ni) surface alloys Qiu M, Fang ZX, Li Y, Zhu J, Huang X, Ding KN, Chen WK, Zhang YF |
913 - 923 |
Recyclable and visible light sensitive Ag-AgBr/TiO2: Surface adsorption and photodegradation of MO Liu XX, Zhang D, Guo B, Qu Y, Tian G, Yue HJ, Feng SH |
924 - 932 |
The inhibitive mechanisms of nitrite and molybdate anions on initiation and propagation of pitting corrosion for mild steel in chloride solution Zhou Y, Zuo Y |
933 - 938 |
Interplay effects of humidity and UV light sensitivities of Zn0.9Mg0.1O nanogranular thin films Brouri T, Lescop B, Elies P, Rioual S |
939 - 948 |
Highly effective and stable Ag3PO4-WO3/MWCNTs photocatalysts for simultaneous Cr(VI) reduction and orange II degradation under visible light irradiation Cai L, Xiong XL, Liang NG, Long QY |
949 - 957 |
One-pot facile synthesis of branched Ag-ZnO heterojunction nanostructure as highly efficient photocatalytic catalyst Huang QL, Zhang QT, Yuan SS, Zhang YC, Zhang M |
958 - 963 |
Electrical activation of nitrogen heavily implanted 3C-SiC(100) Li F, Sharma Y, Shah V, Jennings M, Perez-Tomas A, Myronov M, Fisher C, Leadley D, Mawby P |
964 - 972 |
The fabrication of stable superhydrophobic surfaces using a thin Au/Pd coating over a hydrophilic 3C-SiC nanorod network Khan A, Sohail S, Jacob C |
973 - 978 |
High coverage hydrogen adsorption on the Fe3O4(110) surface Yu XH, Zhang XM, Wang SG |
979 - 985 |
Kinetics behavior of long-chain n-alkanethiols adsorbed on copper surface Zhang YZ, Zhou J, Han XL, Zhang XL, Hu J |
986 - 994 |
Adsorption of F2C=CFCl on TiO2 nano-powder: Structures, energetics and vibrational properties from DRIFT spectroscopy and periodic quantum chemical calculations Tasinato N, Moro D, Stoppa P, Charmet AP, Toninello P, Giorgianni S |
995 - 1002 |
Effects of combined plasma chromizing and shot peening on the fatigue properties of a Ti6Al4V alloy Yu SM, Liu DX, Zhang XH, Du DX |
1003 - 1012 |
Co-doped MoS2 NPs with matched energy band and low overpotential high efficiently convert CO2 to methanol Peng H, Lu J, Wu CX, Yang ZX, Chen H, Song WJ, Li PQ, Yin HZ |
1013 - 1022 |
High temperature oxidation behavior of Mg-Y-Sn, Mg-Y, Mg-Sn alloys and its effect on corrosion property Yu XW, Jiang B, Yang H, Yang QS, Xia XS, Pan FS |
1023 - 1030 |
Investigation on the evolution of microstructure and texture of electroplated Ni-Ti composite coating by Rietveld method Zhao YT, Cai F, Wang CX, Chai Z, Zhu KY, Xu Z, Jiang CH |
1031 - 1036 |
Preparation of silica aerogels using CTAB/SDS as template and their efficient adsorption Li W, Li FY, Zhuo FL, Cao MJ, Cai Q, Huang J, Zhang WJ, Mu MW |
1037 - 1045 |
Electrochemical activity of iron in acid treated bentonite and influence of added nickel Mudrinic T, Mojovic Z, Milutinovic-Nikolic A, Mojovic M, Zunic M, Vukelic N, Jovanovic D |
1046 - 1051 |
Pulsed laser deposition of anatase thin films on textile substrates Kramer A, Kunz C, Graf S, Muller FA |
1052 - 1060 |
Effects of B2/B19' phase boundary on thermally induced phase transition in NiTi: An atomistic study Qin SJ, Shang JX, Wang X, Wang FH |
1061 - 1069 |
Synthesis and oxygen vacancy related NO2 gas sensing properties of ZnO:Co nanorods arrays gown by a hydrothermal method Zou CW, Liang F, Xue SW |
1070 - 1081 |
Tailoring molybdenum nanostructure evolution by low-energy He+ ion irradiation Tripathi JK, Novakowski TJ, Hassanein A |
1082 - 1086 |
Correlation between surface morphology and electrical properties of VO2 films grown by direct thermal oxidation method Yoon J, Park C, Park S, Mun BS, Ju H |
1087 - 1094 |
Removal of arsenate by ferrihydrite via surface complexation and surface precipitation Jiang XL, Peng CJ, Fu D, Chen Z, Shen L, Li QB, Ouyang T, Wang YP |
1095 - 1102 |
BSA adsorption onto nanospheres: Influence of surface curvature as probed by electrophoretic light scattering and UV/vis spectroscopy Sanchez-Perez JA, Gallardo-Moreno AM, Gonzalez-Martin ML, Vadillo-Rodriguez V |
1103 - 1111 |
Oil detachment from silica surface modified by carboxy groups in aqueous cetyltriethylammonium bromide solution Li XF, Xue QZ, Wu TT, Jin YK, Ling CC, Lu SF |
1112 - 1116 |
Surface nano-texturing of silicon by picosecond laser irradiation through TiO2 nanotube arrays Babu KESR, Duraiselvam M |
1117 - 1125 |
A mild synthetic route to Fe3O4@TiO2-Au composites: preparation, characterization and photocatalytic activity Ma JQ, Guo SB, Guo XH, Ge HG |
1126 - 1136 |
Studies on interfacial tension and contact angle of synthesized surfactant and polymeric from castor oil for enhanced oil recovery Babu K, Pal N, Bera A, Saxena VK, Mandal A |
1137 - 1142 |
Preparation and surface properties of transparent UV-resistant "petal effect" superhydrophobic surface based on polybenzoxazine Liu J, Lu X, Xin Z, Zhou CL |
1143 - 1149 |
Observation of a crossover in kinetic aggregation of Palladium colloids Ghafari M, Ranjbar M, Rouhani S |
1150 - 1155 |
High-adhesion Cu patterns fabricated by nanosecond laser modification and electroless copper plating Lv M, Liu JG, Zeng XY, Du QF, Ai J |
1156 - 1163 |
Surface properties of W-implanted TiN coatings post-treated by low temperature ion sulfurization Tian B, Yue W, Wang CB, Liu JJ |
1164 - 1169 |
Characterization of the PtNi(111) surface and their influence on the selectivity of C=C and COOH bonds: A DFT study Simonetti S, Tortorella ED, Brizuela G, Juan A |
1170 - 1178 |
Binary iron-chromium oxide as negative electrode for lithium-ion micro-batteries - spectroscopic and microscopic characterization Tian BB, Swiatowska J, Maurice V, Zanna S, Seyeux A, Marcus P |
1179 - 1185 |
Diatomite-immobilized BiOI hybrid photocatalyst: Facile deposition synthesis and enhanced photocatalytic activity Li BY, Huang HW, Guo YX, Zhang YH |
1186 - 1194 |
Rapid fabrication of Al2O3 encapsulations for organic electronic devices Ali K, Ali J, Mehdi SM, Choi KH, An YJ |
1195 - 1202 |
Electric and pyroelectric properties of AIN thin films deposited by reactive magnetron sputtering on Si substrate Stan GE, Botea M, Boni GA, Pintilie I, Pintilie L |
1203 - 1207 |
Transparent and electrically conductive GaSb/Si direct wafer bonding at low temperatures by argon-beam surface activation Predan F, Reinwand D, Klinger V, Dimroth F |
1208 - 1213 |
Photoelectron spectroscopy as an in situ contact-less method for studies of MOS properties of ultrathin oxides on Si Silva AG, Pedersen K, Li ZSS, Morgen P |
1214 - 1222 |
Surface structures induced by ultrashort laser pulses: Formation mechanisms of ripples and grooves He ST, Nivas JJJ, Anoop KK, Vecchione A, Hu ML, Bruzzese R, Amoruso S |
1223 - 1233 |
Mechanical and wet tribological properties of carbon fabric/phenolic composites with different weave filaments counts Li WB, Huang JF, Fei J, Cao LY, Yao CY |
1234 - 1241 |
How to decrease the hydrophilicity of wood flour to process efficient composite materials Pouzet M, Gautier D, Charlet K, Dubois M, Beakou A |
1242 - 1252 |
How deposition parameters affect corrosion behavior of TiO2-Al2O3 nanocomposite coatings Niazi H, Yari S, Golestani-Fard F, Shahmiri M, Wang W, Alfantazi A, Bayati R |
1253 - 1259 |
Solvent-treated PEDOT:PSS on the improvement PTB7 based on polymer solar cells performance Huang D, Xu Z, Zhao SL, Li Y, Zhao L, Jin SQ |
1260 - 1268 |
One-step preparation of CNTs/InVO4 hollow nanofibers by electrospinning and its photocatalytic performance under visible light Zhang YX, Ma D, Wu J, Zhang QZ, Xin YJ, Bao N |
1269 - 1276 |
Improved Si/SiOx interface passivation by ultra-thin tunneling oxide layers prepared by rapid thermal oxidation Gad KM, Vossing D, Balamou P, Hiller D, Stegemann B, Angermann H, Kasemann M |
1277 - 1284 |
Rapid fabrication of SERS substrate and superhydrophobic surface with different micro/nano-structures by electrochemical shaping of smooth Cu surface Guo MM, Liu ML, Zhao W, Xia Y, Huang W, Li ZL |
1285 - 1290 |
The influence of instrumental parameters on the adhesion force in a flat-on-rough contact geometry Colak A, Wormeester H, Zandvliet HJW, Poelsema B |
1291 - 1309 |
Isothermal and dynamic oxidation behaviour of Mo-W doped carbon-based coating Mandal P, Ehiasarian AP, Hovsepian PE |
1310 - 1319 |
A novel approach for application of nylon membranes in the biosensing domain Farahmand E, Ibrahim F, Hosseini S, Rothan HA, Yusof R, Koole LH, Djordjevic I |
1320 - 1325 |
Microstructure and characterization of a novel cobalt coating prepared by cathode plasma electrolytic deposition Quen C, He YD |
1326 - 1333 |
Preparation of a zeolite-modified polymer monolith for identification of synthetic colorants in lipsticks Wang HQ, Li Z, Niu Q, Ma JT, Jia Q |
1334 - 1341 |
Femtosecond laser surface structuring of molybdenum thin films Kotsedi L, Mthunzi P, Nuru ZY, Eaton SM, Sechoghela P, Mongwaketsi N, Ramponi R, Maaza M |
1342 - 1349 |
An electrochemical investigation on the dissolution of bilayered porous anodic alumina Liao JF, Ling ZY, Li Y, Hu X |