1 - 6 |
Synthesis of copper nanocolloids using a continuous flow based microreactor Xu L, Peng JH, Srinivasakannan C, Chen G, Shen AQ |
7 - 13 |
SnS2 nanoplates embedded in 3D interconnected graphene network as anode material with superior lithium storage performance Tang HL, Qi X, Han WJ, Ren L, Liu YD, Wang XY, Zhong JX |
14 - 18 |
UV micro-imprint patterning for tunable light trapping in p-i-n thin-film silicon solar cells Wang YF, Zhang XD, Han B, Bai LS, Zhao HX, Yang F, Liang JH, Huang Q, Chen XL, Zhao Y |
19 - 25 |
Activation treatment effects on characteristics of BeO layer and secondary electron emission properties of an activated Cu-Be alloy Wang B, Wu ED, Wang YL, Xiong LY, Liu S |
26 - 31 |
Power ultrasound irradiation during the alkaline etching process of the 2024 aluminum alloy Moutarlier V, Viennet R, Rolet J, Gigandet MP, Hihn JY |
32 - 44 |
Nanostructured titanium-silver coatings with good antibacterial activity and cytocompatibility fabricated by one-step magnetron sputtering Bai L, Hang RQ, Gao A, Zhang XY, Huang XB, Wang YY, Tang B, Zhao LZ, Chu PK |
45 - 51 |
Product selectivity of visible-light photocatalytic reduction of carbon dioxide using titanium dioxide doped by different nitrogen-sources Zhang ZG, Huang ZF, Cheng XD, Wang QL, Chen Y, Dong PM, Zhang XW |
52 - 58 |
On the increasing of adhesive strength of nanotube layers on beta titanium alloys for medical applications Fojt J, Filip V, Joska L |
59 - 63 |
Enhanced TiC/SiC Ohmic contacts by ECR hydrogen plasma pretreatment and low-temperature post-annealing Liu BB, Qin FW, Wang DJ |
64 - 73 |
Synthesis, characterization and in vitro cytotoxicity analysis of a novel cellulose based drug carrier for the controlled delivery of 5-fluorouracil, an anticancer drug Anirudhan TS, Nima J, Divya PL |
74 - 81 |
The role of structure and surface chemistry of carbon nanomaterials in catalytic conversion of 1,2-dichloroethane Tveritinova EA, Zhitnev YN, Kulakova II, Cherkasov N, Maslakov KI, Nesterova EA, Ivanov AS, Savilov SV, Lunin VV |
82 - 92 |
RF plasma enhanced MOCVD of yttria stabilized zirconia thin films using octanedionate precursors and their characterization Chopade SS, Nayak C, Bhattacharyya D, Jha SN, Tokas RB, Sahoo NK, Deo MN, Biswas A, Rai S, Raman KHT, Rao GM, Kumar N, Patil DS |
93 - 97 |
Oxidation of the 8 x 8-reconstructed beta-Si3N4(0001) surface: A photoemission study Flammini R, Bellucci A, Wiame F, Belkhou R, Carbone M, Trucchi DM, Colonna S, Ronci F, Hajlaoui M, Silly MG, Sirotti F |
98 - 103 |
Microwave accelerated synthesis of zinc oxide nanoplates and their enhanced photocatalytic activity under UV and solar illuminations Anas S, Rahul S, Babitha KB, Mangalaraja RV, Ananthakumar S |
104 - 111 |
Laser surface textured titanium alloy (Ti-6Al-4V): Part 1-Surface characterization Pfleging W, Kumari R, Besser H, Scharnweber T, Majumdar JD |
112 - 120 |
Crystallization mechanism and corrosion property of electroless nickel phosphorus coating during intermediate temperature oxidation Sribalaji M, Arunkumar P, Babu KS, Keshri AK |
121 - 126 |
Multiferroic properties of (Bi, Ca)FeO3 films on glass substrates Chang HW, Shen CY, Yuan FT, Tu KT, Lo YC, Tu SY, Wang CR, Tu CS, Ouyang H, Shih CW, Chang WC, Jen SU |
127 - 132 |
Facile manipulation of receding contact angles of a substrate by roughening and fluorination Li YF, Wu CJ, Sheng YJ, Tsao HK |
133 - 138 |
Effect of annealing atmosphere on the thermal coarsening of nanoporous gold films Chen AY, Shi SS, Liu F, Wang Y, Li X, Gu JF, Xie XF |
139 - 144 |
Engineering optical properties of metal/porous anodic alumina films for refractometric sensing Wang LF, Qin XF, Ji DX, Parry JP, Zhang JQ, Deng CH, Ding GQ, Gan QQ, Zeng H, Xu XH |
145 - 152 |
Fabricating an enhanced stable superhydrophobic surface on copper plates by introducing a sintering process Hu JY, Yuan W, Yan ZG, Zhou B, Tang Y, Li ZT |
153 - 159 |
Facile synthesis and shape evolution of oleic acid decorated Cu2O microcrystals Xu B, Cao XH, Zhu BC, Lou BY, Ma XC, Li X, Wang YG |
160 - 165 |
Enhancement of CNT/PET film adhesion by nano-scale modification for flexible all-solid-state supercapacitors Kang YJ, Chung H, Kim MS, Kim W |
166 - 170 |
Two-dimensional evaluation of 3D needled C-f/SiC composite fiber bundle surface Wei JH, Lin B, Cao XY, Zhang XF, Fang S |
171 - 182 |
Adsorption of sulfur compound utilizing rice husk ash modified with niobium Cavalcanti RM, Pessoa WAG, Braga VS, Barros IDL |
183 - 190 |
Selective hydrodechlorination of 1,2-dichloroethane to ethylene over Pd-Ag/Al2O3 catalysts prepared by surface reduction Han YX, Gu GF, Sun JY, Wang WJ, Wan HQ, Xu ZY, Zheng SR |
191 - 196 |
Synthesis and enhanced photocatalytic property of feather-like Cd-doped CuO nanostructures by hydrothermal method Wang YQ, Jiang TT, Meng DW, Wang DG, Yu MH |
197 - 202 |
SERS detection and antibacterial activity from uniform incorporation of Ag nanoparticles with aligned Si nanowires Chen CY, Hsu LJ, Hsiao PH, Yu CTR |
203 - 208 |
Erosion difference of growth and nucleation sides of free-standing diamond films prepared by DC arc plasma jet CVD Zhu RH, Li CM, Chen LX, Liu JL, Wei JJ, Hei LF, Guo H |
209 - 209 |
Highly efficient oil/water separation and excellent self-cleaning surfaces based on 1-triacontanol-polymerized octadecylsiloxane coatings (vol 351, pg 358, 2015) Jin YX, Ke QP, Jiang P, Zhu YSN, Cheng FH, Zhang YX |
210 - 212 |
The dynamics of ultraviolet-induced oxygen vacancy at the surface of insulating SrTiO3(001) Suwanwong S, Eknapakul T, Rattanachai Y, Masingboon C, Rattanasuporn S, Phatthanakun R, Nakajima H, King PDC, Hodak SK, Meevasana W |
213 - 217 |
Click functionalization of phenyl-capped bithiophene on azide-terminated self-assembled monolayers Zheng YJ, Cui JX, Ikeda T |
218 - 225 |
Facile synthesis of differently shaped, ultrathin, and aligned graphene flakes without a catalyst for highly efficient field emission Wang FJ, Deng LN, Deng JH |
226 - 232 |
Superhydrophobic surface on steel substrate and its anti-icing property in condensing conditions Wang N, Xiong DS, Li MT, Deng YL, Shi Y, Wang K |
233 - 241 |
Adsorption of acetyl halide molecules on the surface of pristine and Al-doped graphene: Ab initio study Rad AS, Kashani OR |
242 - 249 |
Effect of temperature and NO2 surface adsorption on electrical properties of screen printed ITO thin film Madhi I, Meddeb W, Bouzid B, Saadoun M, Bessais B |
250 - 255 |
Atomic scale elemental mapping of light elements in multilayered perovskite coatings Negrea RF, Teodorescu VS, Ghica C |
256 - 261 |
Photovoltaic properties of dye sensitised solar cells using TiO2 nanotube arrays for photoanodes: Role of hydrochloric acid treatment Liu T, Wang BY, Xie J, Li QT, Zhang J, Asghar MI, Lund PD, Wang H |
262 - 267 |
Non-covalent functionalization of graphene oxide by polyindole and subsequent incorporation of Ag nanoparticles for electrochemical applications Dubey P, Kumar A, Prakash R |
268 - 271 |
Depth-selective X-ray absorption spectroscopy by detection of energy-loss Auger electrons Isomura N, Soejima N, Iwasaki S, Nomoto T, Murai T, Kimoto Y |
272 - 278 |
Investigation of carbon nanotube-containing film on silicon substrates and its tribological behavior Sun ZY, Cheng XH |
279 - 289 |
X-ray photoelectron spectroscopic and morphologic studies of Ru nanoparticles deposited onto highly oriented pyrolytic graphite Bavand R, Yelon A, Sacher E |
290 - 297 |
Fabrication of the replica templated from butterfly wing scales with complex light trapping structures Han ZW, Li B, Mu ZZ, Yang M, Niu SC, Zhang JQ, Ren LQ |
298 - 309 |
Microstructural evolution and wear behaviors of laser cladding Ti2Ni/alpha(Ti) dual-phase coating reinforced by TiB and TiC Song R, Li J, Shao JZ, Bai LL, Chen JL, Qu CC |
310 - 319 |
Effect of metal vaporization behavior on keyhole-mode surface morphology of selective laser melted composites using different protective atmospheres Dai DH, Gu DD |
320 - 326 |
Structure and properties of titanium surface layers after electron beam alloying with powder mixtures containing carbon Lenivtseva OG, Bataev IA, Golkovskii MG, Bataev AA, Samoilenko VV, Plotnikova NV |
327 - 333 |
The effect of surface modification on initial ice formation on aluminum surfaces Rahimi M, Afshari A, Fojan P, Gurevich L |
334 - 340 |
Laser cleaning of sulfide scale on compressor impeller blade Tang QH, Zhou D, Wang YL, Liu GF |
341 - 349 |
Synthesis of silver nanoparticles by laser ablation in ethanol: A pulsed photoacoustic study Valverde-Alva MA, Garcia-Fernandez T, Villagran-Muniz M, Sanchez-Ake C, Castaneda-Guzman R, Esparza-Alegria E, Sanchez-Valdes CF, Llamazares JLS, Herrera CEM |
350 - 358 |
Effects of heat treatment on microstructure and mechanical properties of Ni60/h-BN self-lubricating anti-wear composite coatings on 304 stainless steel by laser cladding Lu XL, Liu XB, Yu PC, Zhai YJ, Qiao SJ, Wang MD, Wang YG, Chen Y |
359 - 363 |
Enhanced current efficiency of organic light-emitting devices due to a broad localized surface plasmonic resonance of Au-ZnO nanocomposites Lee YH, Kim DH, Kim TW |
364 - 368 |
Applicability of random sequential adsorption algorithm for simulation of surface plasma polishing kinetics Minarik S, Vana D |
369 - 378 |
Microstructure and wettability of root canal dentine and root canal filling materials after different chemical irrigation Antonijevic D, Milovanovic P, Brajkovic D, Ilic D, Hahn M, Amling M, Rakocevic Z, Djuric M, Busse B |
379 - 387 |
In situ fabrication of novel Z-scheme Bi2WO6 quantum dots/g-C3N4 ultrathin nanosheets heterostructures with improved photocatalytic activity Chen W, Liu TY, Huang T, Liu XH, Zhu JW, Duan GR, Yang XJ |
388 - 397 |
Silver-doped nanocomposite carbon coatings (Ag-DLC) for biomedical applications - Physiochemical and biological evaluation Bociaga D, Komorowski P, Batory D, Szymanski W, Olejnik A, Jastrzebski K, Jakubowski W |
398 - 402 |
Pulse laser deposition of epitaxial TiO2 thin films for high-performance ultraviolet photodetectors Zhang ZF, Wong LM, Zhang ZW, Wu ZY, Wang SJ, Chi DZ, Hong RD, Yang WF |
403 - 410 |
Effects of the geometries of micro-scale substrates on the surface morphologies of ZnO nanorod-based hierarchical structures Jing WX, Qi H, Shi JF, Jiang ZD, Zhou F, Cheng YY, Gao K |
411 - 418 |
Graphene and TiO2 co-modified flower-like Bi2O2CO3. A novel multi-heterojunction photocatalyst with enhanced photocatalytic activity Ao YH, Xu LY, Wang PF, Wang C, Hou J, Qian J, Li Y |
419 - 428 |
One step microwaved-assisted hydrothermal synthesis of nitrogen doped graphene for high performance of supercapacitor Sari FNI, Ting JM |
429 - 435 |
Density functional theory study of SO2-adsorbed Ni(111) and hydroxylated NiO(111) surface Wei X, Dong CF, Chen ZH, Xiao K, Li XG |
436 - 445 |
Graphene immobilized enzyme/polyethersulfone mixed matrix membrane: Enhanced antibacterial, permeable and mechanical properties Duan LL, Wang YM, Zhang YT, Liu JD |
446 - 452 |
Developing of a novel antibacterial agent by functionalization of graphene oxide with guanidine polymer with enhanced antibacterial activity Li P, Sun SY, Dong A, Hao YP, Shi SQ, Sun ZJ, Gao G, Chen YX |
453 - 460 |
Sliding wear behavior of nanostructured WC-Co-Cr coatings Wang HB, Wang XZ, Song XY, Liu XM, Liu XW |
461 - 472 |
Research and application of surface heat treatment for multipulse laser ablation of materials Cai S, Chen GY, Zhou C |
473 - 476 |
Confinement effect on coercive field in relaxor terpolymer nanowires Liu BL, Tian BB, Sun JL, Liu Y, Wang JL, Sun S, Meng XJ, Chu JH |
477 - 483 |
Spatially resolved nanostructural transformation in graphite under femtosecond laser irradiation Marcu A, Avotina L, Porosnicu C, Marin A, Grigorescu CEA, Ursescu D, Lungu M, Demitri N, Lungu CP |
484 - 494 |
Metal oxide nanostructures-containing organic polymer hybrid solar cells: Optimization of processing parameters on cell performance Motaung DE, Makgwane PR, Ray SS |
495 - 501 |
Fabrication of super slippery sheet-layered and porous anodic aluminium oxide surfaces and its anticorrosion property Song TT, Liu Q, Liu JY, Yang WL, Chen RR, Jing XY, Takahashi K, Wang J |
502 - 508 |
Mono- and multiple TiN(/Ti) coating adhesion mechanism on a Ti-13Nb-13Zr alloy Li JZ, Zheng H, Sinkovits T, Hee AC, Zhao Y |
509 - 515 |
Effect of surface treatment on adhesion strength between magnetron sputtered copper thin films and alumina substrate Lim JD, Lee PM, Rhee DMW, Leong KC, Chen Z |
516 - 530 |
Influence of trimethylsilane flow on the microstructure, mechanical and tribological properties of CrSiCN coatings in water lubrication Wu ZW, Zhou F, Wang QZ, Zhou ZF, Yan JW, Li LKY |
531 - 535 |
Interfaces exchange bias and magnetic properties of ordered CoFe2O4/Co3O4 nanocomposites Zhang BB, Xu JC, Wang PF, Han YB, Hong B, Jin HX, Jin DF, Peng XL, Li J, Yang YT, Gong J, Ge HL, Wang XQ |
536 - 546 |
Fullerene C-70 decorated TiO2 nanowires for visible-light-responsive photocatalyst Cho EC, Ciou JH, Zheng JH, Pan J, Hsiao YS, Lee KC, Huang JH |
547 - 552 |
Synthesis and photocatalytic property of multilayered Co3O4 Zhang DE, Ren LZ, Hao XY, Pan BB, Wang MY, Ma JJ, Li F, Li SA, Tong ZW |
553 - 561 |
New nanostructured nickel-polymer nanohybrids with improved surface hydrophobicity and effect on the living cells adhesion Macko J, Orinak A, Orinakova R, Muhmann C, Petrus O, Harvanova D, Vargova J, Jendzelovsky R, Radonak J, Fedorocko P, Arlinghaus HF |
562 - 569 |
Adsorption mechanism of magnetically separable Fe3O4/graphene oxide hybrids Ouyang K, Zhu CH, Zhao Y, Wang LC, Xie S, Wang Q |
570 - 576 |
Dextran hydrogel coated surface plasmon resonance imaging (SPRi) sensor for sensitive and label-free detection of small molecule drugs Li SP, Yang M, Zhou WF, Johnston TG, Wang R, Zhu JS |
577 - 581 |
DFT study of interactions between calcium hydroxyl ions and pyrite, marcasite, pyrrhotite surfaces Zhao CH, Chen JH, Li YQ, Huang DW, Li WZ |
582 - 586 |
Effects of oxygen partial pressure on the characteristics of magnetron-sputtered ZnMgBeO thin films Cuong HB, Lee BT |
587 - 592 |
Palladium nanoparticles deposited on graphene and its electrochemical performance for glucose sensing Mijowska E, Onyszko M, Urbas K, Aleksandrzak M, Shi XZ, Moszynski D, Penkala K, Podolski J, El Fray M |
593 - 601 |
Plasma sprayed rutile titania-nanosilver antibacterial coatings Gao JJ, Zhao CJ, Zhou JF, Li CX, Shao YR, Shi C, Zhu YC |
602 - 614 |
Effect of micro/nano-scale textures on anti-adhesive wear properties of WC/Co-based TiAlN coated tools in AISI 316 austenitic stainless steel cutting Zhang KD, Deng JX, Sun JL, Jiang C, Liu YY, Chen S |
615 - 622 |
Facile synthesis of porous Ag3PO4 nanotubes for enhanced photocatalytic activity under visible light Wan J, Sun L, Fan J, Liu EZ, Hu X, Tang CN, Yin YC |
623 - 630 |
Structural, electronic and magnetic properties of Mn3N2(001) surfaces Guerrero-Sanchez J, Mandru AO, Wang K, Takeuchi N, Cocoletzi GH, Smith AR |
631 - 637 |
Effect of the sheet thickness of hierarchical SnO2 on the gas sensing performance Zhang WL, Zeng W, BinMiao, Wang ZC |
638 - 643 |
Pre-ablation treatment of carbon/carbon composites to improve the thermal shock resistance for SiC coating under oxyacetylene torch Zhang JP, Fu QG, Qu JL, Li HJ |
644 - 652 |
Synthesis of spherical Ag/ZnO heterostructural composites with excellent photocatalytic activity under visible light and UV irradiation Liu HR, Hu YC, Zhang ZX, Liu XG, Jia HS, Xu BS |
653 - 659 |
Nanocone formation on ion-bombarded InP surfaces Kramczynski D, Gnaser H |
660 - 666 |
A density functional theory study of partial oxidation of propylene on Cu2O(001) and CuO(001) surfaces Duzenli D, Atmaca DO, Gezer MG, Onal I |
667 - 671 |
Study on WSb3Te material for phase-change memory applications Meng Y, Zhou XL, Han PG, Song ZT, Wu LC, Zhu CQ, Guo WJ, Xu L, Ma ZY, Song LK |
672 - 680 |
Effect of washing pH on the properties of titanate nanotubes and its activity for photocatalytic oxidation of NO and NO2 Nguyen NH, Bai H |
681 - 685 |
Possible evidence of Coulomb explosion in the femtosecond laser ablation of metal at low laser fluence Li SC, Li SY, Zhang FJ, Tian D, Li H, Liu DL, Jiang YF, Chen AM, Jin MX |
686 - 697 |
Atomic force microscopy analysis of synthetic membranes applied in release studies Olejnik A, Nowak I |
698 - 701 |
Large coincidence lattice on Au/Fe3O4 incommensurate structure for spintronic applications Munoz-Noval A, Rubio-Zuazo J, Salas-Colera E, Serrano A, Rubio-Marcos F, Castro GR |
702 - 705 |
He plasma treatment of transparent conductive ZnO thin films Yao JK, Chen SM, Sun XW, Kwok HS |
706 - 715 |
Adsorption and visible light-driven photocatalytic degradation of Rhodamine B in aqueous solutions by Ag@AgBr/SBA-15 Hu LX, Yuan H, Zou LP, Chen FY, Hu X |
716 - 725 |
Steam assisted oxide growth on aluminium alloys using oxidative chemistries: Part II corrosion performance Din RU, Jellesen MS, Ambat R |
726 - 735 |
Rapid synthesis and characterization of hybrid ZnO@Au core-shell nanorods for high performance, low temperature NO2 gas sensor applications Ponnuvelu DV, Pullithadathil B, Prasad AK, Dhara S, Ashok A, Mohamed K, Tyagi AK, Raja B |
736 - 742 |
Wrinkling of YBa2Cu3O7-x film prepared by trifluoroacetate metal organic deposition Jin LH, Li CS, Yu ZM, Feng JQ, Zhang SN, Sulpice A, Wang Y, Zhang PX |
743 - 747 |
On the target surface cleanness during magnetron sputtering Schelfhout R, Strijckmans K, Boydens F, Depla D |
748 - 760 |
Physico-chemical characterization of Metal-doped bone chars and their adsorption behavior for water defluoridation Rojas-Mayorga CK, Bonilla-Petriciolet A, Silvestre-Albero J, Aguayo-Villarreal IA, Mendoza-Castillo DI |
761 - 765 |
Investigation of factors influencing microscopic interactions between the diamond indenter and material surfaces in nano-indentation Wei QL, Li XY, Yang Q, Gao W |
766 - 773 |
Effect of current density and bath composition on crystalline structure and magnetic properties of electrodeposited FeCoW alloy Ghaferi Z, Sharafi S, Bahrololoom ME |
774 - 777 |
Chlorine-functionalized carbon dots for highly efficient photodegradation of pollutants under visible-light irradiation Hu SL, Ding YL, Chang Q, Yang JL, Lin K |
778 - 783 |
Thermal evolution of Fe on Ge(111)-c(2 x 8) surface and the effect of (root 3 x root 3)R30 degrees Ag-Ge buffer layer Hsu HC, Jhou MK, Lin WC, Fu TY |
784 - 791 |
The effect of different component ratios in block polymers and processing conditions on electrodeposition efficiency onto titanium Fukuhara Y, Kyuzo M, Tsutsumi Y, Nagai A, Chen P, Hanawa T |
792 - 799 |
Evolution of arsenic in high fluence plasma immersion ion implanted silicon: Behavior of the as-implanted Surface Vishwanath V, Demenev E, Giubertoni D, Vanzetti L, Koh AL, Steinhauser G, Pepponi G, Bersani M, Meirer F, Foad MA |
800 - 804 |
Integration of plasmonic Ag nanoparticles as a back reflector in ultra-thin Cu(In,Ga)Se-2 solar cells Yin GC, Steigert A, Andrae P, Goebelt M, Latzel M, Manley P, Lauermann I, Christiansen S, Schmid M |
805 - 813 |
Structure and corrosion behavior of sputter deposited cerium oxide based coatings with various thickness on Al 2024-T3 alloy substrates Liu YY, Huang JM, Claypool JB, Castano CE, O'Keefe MJ |
814 - 819 |
Postsynthetic modification of metal-organic framework for hydrogen sulfide detection Zhang X, Zhang JM, Hu Q, Cui YJ, Yang Y, Qian GD |
820 - 831 |
Steam assisted oxide growth on aluminium alloys using oxidative chemistries: Part I Microstructural investigation Din RU, Piotrowska K, Gudla VC, Jellesen MS, Ambat R |
832 - 841 |
In vitro study of polycaprolactone/bioactive glass composite coatings on corrosion and bioactivity of pure Mg Yang YY, Michalczyk C, Singer F, Virtanen S, Boccaccini AR |
842 - 848 |
Chemical and microstructural characterizations of plasma polymer films by time-of-flight secondary ion mass spectrometry and principal component analysis Cossement D, Renaux F, Thiry D, Ligot S, Francq R, Snyders R |
849 - 860 |
Interface feature characterization and Schottky interfacial layer confirmation of TiO2 nanotube array film Li HC, Tang NX, Yang HZ, Leng X, Zou JP |
861 - 867 |
Preparation and photo-catalytic activities of FeOOH/ZnO/MMT composite Zhou Y, Liu FS, Yu ST |
868 - 877 |
Wettability alteration by novel betaines at polymer-aqueous solution interfaces Hu SS, Zhang L, Xu ZC, Gong QT, Jin ZQ, Luo L, Zhang L, Zhao S |
878 - 883 |
Microstructure and tribological properties of NbN-Ag composite films by reactive magnetron sputtering Ju HB, Xu JH |
884 - 890 |
Synthesis and optical properties of Au decorated colloidal tungsten oxide nanoparticles Tahmasebi N, Mandavi SM |
891 - 901 |
Effectively CO2 photoreduction to CH4 by the synergistic effects of Ca and Ti on Ca-loaded TiSiMCM-41 mesoporous photocatalytic systems Jo SW, Kwak BS, Kim KM, Don JY, Park NK, Ryu SO, Ryu HJ, Baek JI, Kang M |
902 - 911 |
DFT study of Hg adsorption on M-substituted Pd(111) and PdM/gamma-Al2O3(110) (M = Au, Ag, Cu) surfaces Wang JC, Yu HF, Geng L, Liu JW, Han LN, Chang LP, Feng G, Ling LX |
912 - 920 |
Anodic luminescence, structural, photoluminescent, and photocatalytic properties of anodic oxide films grown on niobium in phosphoric acid Stojadinovic S, Tadic N, Radic N, Stefanov P, Grbic B, Vasilic R |
921 - 929 |
Facile synthesis of hierarchical Ag3PO4/TiO2 nanofiber heterostructures with highly enhanced visible light photocatalytic properties Xie JL, Yang YF, He HP, Cheng D, Mao MM, Jiang QX, Song LX, Xiong J |
930 - 938 |
Influence of SiC surface polarity on the wettability and reactivity in an Al/SiC system Shen P, Wang Y, Ren LH, Li SX, Liu YH, Jiang QC |
939 - 958 |
Tungsten-based nanomaterials (WO3 & Bi2WO6): Modifications related to charge carrier transfer mechanisms and photocatalytic applications Kumar SG, Rao KSRK |
959 - 968 |
Influence of triblock copolymer (pluronic F127) on enhancing the physico-chemical properties and photocatalytic response of mesoporous TiO2 Samsudin EM, Abd Hamid SB, Juan JC, Basirun WJ |
969 - 977 |
Superhydrophobic Ag decorated ZnO nanostructured thin film as effective surface enhanced Raman scattering substrates Jayram ND, Sonia S, Poongodi S, Kumar PS, Masuda Y, Mangalaraj D, Ponpandian N, Viswanathan C |
978 - 983 |
Vertically aligned self-assembled gold nanorods as low turn-on, stable field emitters Apte A, Joshi P, Bhaskar P, Joag D, Kulkarni S |
984 - 988 |
Structural defects and electronic structure of N-ion implanted TiO2: Bulk versus thin film Zatsepin DA, Boukhvalov DW, Kurmaev EZ, Zhidkov IS, Gavrilov NV, Korotin MA, Kim SS |
989 - 998 |
Surface modifications of fusion reactor relevant materials on exposure to fusion grade plasma in plasma focus device Niranjan R, Rout RK, Srivastava R, Chakravarthy Y, Mishra P, Kaushik TC, Gupta SC |
999 - 1006 |
Nanoporous SiO2/TiO2 coating with enhanced interfacial compatibility for orthopedic applications Zhao XB, Cao HC, You J, Cheng XB, Xie YT, Cao HL, Liu XY |
1007 - 1012 |
Microstructural and ferroelectric properties of rare earth (Ce, Pr, and Tb)-doped Na0.5Bi4.5Ti3O15 thin films Raghavan CM, Kim JW, Song TK, Kim SS |
1013 - 1019 |
Highly efficient and reliable high power LEDs with patterned sapphire substrate and strip-shaped distributed current blocking layer Zhou SJ, Yuan S, Liu YC, Guo LJ, Liu S, Ding H |
1020 - 1027 |
Influence of carbon nanotube extending length on pyrocarbon microstructure and mechanical behavior of carbon/carbon composites Feng L, Li KZ, Sun JJ, Jia YJ, Li HJ, Zhang LL |
1028 - 1036 |
Colloidal properties of surface functionalized nanocube-TiO2/poly(3-octylthiophene) core/shell conducting nanocomposite Sever E, Unal HI |
1037 - 1043 |
Surface chemical changes of atmospheric pressure plasma treated rabbit fibres important for felting process Stepanova V, Slavicek P, Stupavska M, Jurmanova J, Cernak M |
1044 - 1050 |
Surface state of GaN after rapid-thermal-annealing using AlN cap-layer El-Zammar G, Khalfaoui W, Oheix T, Yvon A, Collard E, Cayrel F, Alquier D |
1051 - 1056 |
A facile method for the structure control of TiO2 particles at low temperature Li ZQ, Zhu Y, Wang LW, Wang JT, Guo Q, Li JG |
1057 - 1062 |
Fabrication and Raman scattering of a core-shell structure based on Mn doped ZnO and barium titanate Sima M, Baibarac M, Vasile E, Sima M, Mihut L |
1063 - 1068 |
Formation, transformation and superhydrophobicity of compound surfactant-assisted aligned ZnO nanoplatelets Xue MS, Xu T, Xie XL, Ou JF, Wang FJ, Li W |
1069 - 1074 |
Effect of Rh oxide as a cocatalyst over Bi0.5Y0.5VO4 on photocatalytic overall water splitting Chen W, Yang BB, Yu QT, Mao LQ, Fan ZY, Wang QZ, Shangguan WF |
1075 - 1082 |
A facile approach for the tunable fabrication of BiOBr photocatalysts with high activity and stability Li R, Gao XY, Fan CM, Zhang XC, Wang YW, Wang YF |
1083 - 1090 |
Transparent self-cleaning lubricant-infused surfaces made with large-area breath figure patterns Zhang PF, Chen HW, Zhang LW, Ran T, Zhang DY |
1091 - 1097 |
First-principles study of Mg/Al2MgC2 heterogeneous nucleation interfaces Wang HL, Tang JJ, Zhao YJ, Du J |
1098 - 1106 |
Visible light photocatalytic disinfection of E. coli with TiO2-graphene nanocomposite sensitized with tetrakis(4-carboxyphenyl)porphyrin Rahimi R, Zargari S, Yousefi A, Berijani MY, Ghaffarinejad A, Morsali A |
1107 - 1115 |
Enhanced visible-light photocatalytic activities and mechanism insight of BiVO4/Bi2WO6 composites with virus-like structures Xue S, Wei ZW, Hou XY, Xie WH, Li SY, Shang XN, He DY |
1116 - 1122 |
The poisoning effect of potassium ions doped on MnOx/TiO2 catalysts for low-temperature selective catalytic reduction Zhang LJ, Cui SP, Guo HX, Ma XY, Luo XG |
1123 - 1131 |
Composite biodegradable biopolymer coatings of silk fibroin -Poly(3-hydroxybutyric-acid-co-3-hydroxyvaleric-acid) for biomedical applications Miroiu FM, Stefan N, Visan AI, Nita C, Luculescu CR, Rasoga O, Socol M, Zgura I, Cristescu R, Craciun D, Socol G |
1132 - 1135 |
First-principles calculations of the twin boundary energies and adhesion energies of interfaces for cubic face-centered transition-metal nitrides and carbides Li TF, Liu TM, Wei HM, Hussain S, Wang JX, Zeng W, Peng XH, Wang ZC |
1136 - 1144 |
One-step, green, and economic synthesis of water-soluble photoluminescent carbon dots by hydrothermal treatment of wheat straw, and their bio-applications in labeling, imaging, and sensing Yuan M, Zhong RB, Gao HY, Li WR, Yun XL, Liu JR, Zhao XM, Zhao GF, Zhang F |
1145 - 1152 |
Molecular dynamics simulation of the deposition and annealing of NiAl film on Ni substrate Wu B, Zhou JQ, Xue C, Liu HX |
1153 - 1160 |
Stress-induced formation mechanism of stacking fault tetrahedra in nano-cutting of single crystal copper Wang QL, Bai QS, Chen JX, Guo YB, Xie WK |
1161 - 1167 |
Surface chemistry and reactivity of SiO2 polymorphs: A comparative study on alpha-quartz and alpha-cristobalite Tang CH, Zhu JX, Li ZH, Zhu RL, Zhou Q, Wei JM, He HP, Tao Q |
1168 - 1174 |
Fabrication of a Au-polystyrene sphere substrate with three-dimensional nanofeatures for surface-enhanced Raman spectroscopy Hu XT, Xu ZW, Li K, Fang FZ, Wang LY |
1175 - 1179 |
Fabrication and characterization and biosensor application of gold nanoparticles on the carbon nanotubes Ghodselahi T, Aghababaie N, Mobasheri H, Salimi KZ, Pasha MA, Vesaghi MA |
1180 - 1185 |
Optimum inductively coupled plasma etching of fused silica to remove subsurface damage layer Jiang XL, Liu Y, Liu ZK, Qiu KQ, Xu XD, Hong YL, Fu SJ |
1186 - 1191 |
Surface topography to reflectivity mapping in two-dimensional photonic crystals designed in germanium Husanu MA, Ganea CP, Anghel I, Florica C, Rasoga O, Popescu DG |
1192 - 1200 |
Hydrothermal self-assembly of novel porous flower-like SnO2 architecture and its application in ethanol sensor Jiang XH, Ma SY, Sun AM, Zhang ZM, Jin WX, Wang TT, Li WQ, Xu XL, Luo J, Cheng L, Mao YZ, Zhang M |
1201 - 1205 |
Temperature and voltage dependent current-voltage behavior of single-walled carbon nanotube transparent conducting films Zhang ZC, Geng HZ, Wang Y, Yang HJ, Da SX, Ding EX, Liu JC, Yu P, Fu YQ, Li X, Pan H |
1206 - 1214 |
Highly sensitive optical sensor that detects Hg2+ and Cu2+ by immobilizing dicarboxylate 1,5-diphenyl-3-thiocarbazone on surface functionalized PVA microspheres Bai X, Gu HX, Hua ZL, Dai ZY, Yang B, Li YL |
1215 - 1221 |
Protection of NdFeB magnets by corrosion resistance phytic acid conversion film Nan HY, Zhu LQ, Liu HC, Li WP |
1222 - 1228 |
Improved rate capability and cycle stability of Li[Ni0.5Co0.2Mn0.3]O-2 with Li2MnO3 coating under high cut-off voltage Liu T, Zhao SX, Wang KZ, Gou LL, Nan CW |
1229 - 1237 |
Synergistic effects of sodium lauroyl sarcosinate and glutamic acid in inhibition assembly against copper corrosion in acidic solution Yu YZ, Zhang DQ, Zeng HJ, Xie B, Gao LX, Lin T |
1238 - 1244 |
Facile fabrication of biomimetic superhydrophobic surface with anti-frosting on stainless steel substrate Liu Y, Bai Y, Jin JF, Tian LM, Han ZW, Ren LQ |
1245 - 1253 |
Influence of crystallite size and surface morphology on electrochemical properties of annealed TiO2 nanotubes Munirathinam B, Pydimukkala H, Ramaswamy N, Neelakantan L |
1254 - 1260 |
Improving water tolerance of Co3O4 by SnO2 addition for CO oxidation Xu XL, Sun XF, Han H, Peng HG, Liu WM, Peng X, Wang X, Yang XJ |
1261 - 1266 |
Morphological analysis of co-evaporated blend films based on initial growth for organic photovoltaics Shibata Y, Taima T, Zhou Y, Ohashi N, Kono T, Yoshida Y |
1267 - 1271 |
The effect of nitrogen incorporation in Ge-In-Ga-O semiconductor and the associated thin film transistors Du Ahn B, Lee KH, Park J, Park JS |
1272 - 1278 |
A facile approach to derive binder protective film on high voltage spinel cathode materials against high temperature degradation Chou WY, Jin YC, Duh JG, Lu CZ, Liao SC |
1279 - 1288 |
Photoelectric performance of TiO2 nanotube array photoelectrodes sensitized with CdS0.54Se0.46 quantum dots Gakhar R, Smith YR, Misra M, Chidambaram D |
1289 - 1294 |
Reduced graphene oxide supported titanium dioxide nanomaterials for the photocatalysis with long cycling life Cao YC, Fu ZT, Wei WJ, Zou LL, Mi T, He D, Yan CL, Liu XY, Zhu Y, Chen LQ, Sun YJ |
1295 - 1305 |
Active role of the support in NOx storage and reductioncatalytic systems Tek M, Ustunel H, Toffoli D |
1306 - 1315 |
On the surface characteristics of a Zr-based bulk metallic glass processed by microelectrical discharge machining Huang H, Yan JW |
1316 - 1320 |
The origin of two-dimensional electron gas formed in LaGaO3/SrTiO3 Wang FN, Li JC, Du YL, Zhang XH, Liu HZ, Liu J, Wang CL, Mei LM |
1321 - 1326 |
CO sensing properties under UV radiation of Ga-doped ZnO nanopowders Dhahri R, Hiiri M, El Mir L, Bonavita A, Iannazzo D, Leonardi SG, Neri G |