| 2513 - 2521 |
Design and control of energy-efficient distillation columns
Kim YH |
| 2522 - 2529 |
Viscosity and rheological properties of ethylene glycol+water+Fe3O4 nanofluids at various temperatures: Experimental and thermodynamics modeling
Atashrouz S, Mozaffarian M, Pazuki G |
| 2530 - 2537 |
Desulfurization of liquid fuels by air assisted peracid oxidation system in the presence of Fe-ZSM-5 catalyst
Ahmad W, Ahmad I, Yaseen M |
| 2538 - 2546 |
A two-dimensional discrete lumped model for a trickle-bed vacuum gas oil hydrocracking reactor
Sadighi S |
| 2547 - 2554 |
CeO2-TiO2 catalyst prepared by physical mixing for NH3 selective catalytic reduction: Evidence about the migration of sulfates from TiO2 to CeO2 via simple calcination
Song I, Youn S, Lee H, Kim DH |
| 2555 - 2566 |
C2H6/CO2 oxidative dehydrogenation (ODH) reaction on nanostructured CrAPSO-34 catalyst: One-pot hydrothermal vs. conventional hydrothermal/impregnation catalyst synthesis
Rahmani F, Haghighi M |
| 2567 - 2574 |
Parametric study of pyrolysis and steam gasification of rice straw in presence of K2CO3
Baloch HA, Yang T, Sun H, Li J, Nizamuddin S, Li R, Kou Z, Sun Y, Bhutto AW |
| 2575 - 2581 |
Optimization of algal lipid extraction by mixture of ethyl acetate and ethanol via response surface methodology for biodiesel production
Lu W, Alam MA, Pan Y, Nock WJ, Wang Z, Yuan Z |
| 2582 - 2588 |
Fe/N/C catalysts systhesized using graphene aerogel for electrocatalytic oxygen reduction reaction in an acidic condition
Roh CW, Lee H |
| 2589 - 2601 |
Physico-chemical study of dew melon peel biochar for chromium attenuation from simulated and actual wastewaters
Ahmadi M, Kouhgardi E, Ramavandi B |
| 2602 - 2609 |
Electrochemical removal of the insecticide imidacloprid from water on a boron-doped diamond and Ta/PbO2 anodes using anodic oxidation process
Brahim MB, Ammar HB, Abdelhedi R, Samet Y |
| 2610 - 2621 |
Operational characteristics of the pilot-scale coal gasification with filtration and hot fuel gas desulfurization
Lee J, Kang SH, Kim HS, Jeon DH, Lee SJ, Chung SW, Lee JW, Yun Y, Ryu HJ, Baek JI |
| 2622 - 2627 |
Efficient continuous epoxidation of biodiesel in a microstructured reactor
Yao X, Zhang Y, Du L, Liu H, Jiang S |
| 2628 - 2637 |
An experimental and kinetic study of toluene oxidation over LaMn1-xBxO3 and La0.8A0.2Mn0.3B0.7O3 (A=Sr, Ce and B=Cu, Fe) nano-perovskite catalysts
Tarjomannejad A, Farzi A, Niaei A, Salari D |
| 2638 - 2643 |
Interactions among biomass components during co-pyrolysis in (macro)thermogravimetric analyzers
Long Y, Zhou H, Meng A, Li Q, Zhang Y |
| 2644 - 2649 |
An integrated slidable direct polymerase chain reaction-capillary electrophoresis microdevice for rapid Y chromosome short tandem repeat analysis
Lee D, Kim YT, Lee JW, Kim DH, Seo TS |
| 2650 - 2658 |
Modeling and simulation of Bacillus cereus chitosanase activity during purification using expanded bed chromatography
de Araujo Padilha CE, de Araujo NK, de Santana Souza DF, de Oliveira JA, de Macedo GR, dos Santos ES |
| 2659 - 2667 |
Synthesis of acrylic-lignosulfonate resin for crystal violet removal from aqueous solution
Xu W, Zhang W, Li Y, Li W |
| 2668 - 2673 |
On the cleaning procedure of reverse osmosis membrane fouled by steel wastewater
Mei Y, Li H, Xia H |
| 2674 - 2683 |
Fabrication of novel polyethersulfone based nanofiltration membrane by embedding polyaniline-co-graphene oxide nanoplates
Moochani M, Moghadassi A, Hosseini SM, Bagheripour E, Parvizian F |
| 2684 - 2690 |
Selective recovery of Fe(III), Pd(II), Pt(IV), Rh(III) and Ce(III) from simulated leach liquors of spent automobile catalyst by solvent extraction and cementation
Nguyen TH, Kumar BN, Lee MS |
| 2691 - 2698 |
Characterization of the bio-oil and bio-char produced by fixed bed pyrolysis of the brown alga Saccharina japonica
Choi JH, Kim SS, Suh DJ, Jang EJ, Min KI, Woo HC |
| 2699 - 2702 |
Ultra-thin Ni dense membrane prepared by polishing treatment of porous nickel support for high-temperature H2 separation
Ryi SK, Han JY, Kim CH, Seo BS |
| 2703 - 2710 |
Hydrochar preparation from black liquor by CO2 assisted hydrothermal treatment: Optimization of its performance for Pb2+ removal
Sun Y, Zhang JP, Guo F, Zhang L |
| 2711 - 2715 |
Effect of oxygen flow rate on the electrical and optical characteristics of dopantless tin oxide films fabricated by low pressure chemical vapor deposition
Kim JH, Lee HM, Kang DW, Lee KM, Kim CK |
| 2716 - 2731 |
Influence of ultrasonication on preparation of novel material for heavy metal removal from wastewater
Anbalagan S, Ponnusamy SK, Selvam SRP, Sankaranarayan A, Dutta A |
| 2732 - 2737 |
Formation of uniform TiO2 nanoshell on α-alumina nanoplates for effective metallic luster pigments
Lee SJ, You MS, Im SH |
| 2738 - 2746 |
Physical characteristics and in vitro skin permeation of elastic liposomes loaded with caffeic acid-hydroxypropyl-β-cyclodextrin
Im NR, Kim KM, Young SJ, Park SN |
| 2747 - 2755 |
Synthesis of metal organic framework (MOF-5) with high selectivity for CO2/N2 separation in flue gas by maximum water concentration approach
Jiang N, Deng Z, Liu S, Tang C, Wang G |
| 2756 - 2760 |
A novel rapid mist spray technique for synthesis of single phase precipitated calcium carbonate using solid-liquid-gas process
Onimisi JA, Ismail R, Ariffin KS, Baharun N, Hussin HB |
