| 1 - 4 |
Fabrication of photocatalytic TiO2 thin film using innovative aerosol deposition method
Kim JO, Choi WY, Choi BK, Jeong JT |
| 5 - 8 |
Titanium oxide-based photocatalysts: From fundamentals to practical applications
Tsujimaru K, Anpo M |
| 9 - 12 |
Design of efficient TiO2/SiC photocatalysts from TiC-SiC nano particles for degradation of organic pollutants diluted in water
Yamashita H, Nishida Y, Chiyoda O, Nose H, Narisawa M, Ohmichi T, Katayama I |
| 13 - 16 |
Bioactivity of plasma-sprayed TiO2 coating in simulated body fluid by hydrofluoric acid treatment
Zhao XB, Liu XY, Ding CX |
| 17 - 21 |
Nitride formation on titanium under irradiation of intense pulsed ion beam
Zhu XP, Suzuki T, Suematsu H, Jiang W, Niihara K |
| 22 - 25 |
VOC decomposition by photocatalytic wall paper
Taoda H, Fukaya M, Watanabe E, Tanaka K |
| 26 - 29 |
Photo-decomposition property of thermal sprayed TiO2 coatings
Yi Z, Wei W, Liu JT, Gao JH, Ding CX |
| 30 - 33 |
Hydrogen production by catalytic decomposition of methane over carbon nanofibers
Han L, Lim TK, Kim YJ, Hahm HS, Kim MS |
| 34 - 37 |
Photocatalytic oxidation and decomposition of acetic acid over TiO(2), TS-1 and Ti-MCM-41 catalysts
Park JH, Kim SG, Park SS, Hong SS, Lee GD |
| 38 - 41 |
Impact evaluation to human body skin of titania photocatalyst fine particles
Watanabe E, Fukaya M, Taoda H |
| 42 - 45 |
A novel formulation for the modification of transition metal oxide surfaces for antifogging optical application
Asthana Y, Kim DP |
| 46 - 49 |
Dispersion stability of TiO2 powder synthesized by homogeneous precipitation process at low temperature
Woo SH, Kim WW, Rhee CK |
| 50 - 53 |
The electrochemical properties of poly(acrylonitrile) polymer electrolyte for Li/S battery
Ryu HS, Choi JW, Ahn JH, Cho GB, Ahn HJ |
| 54 - 57 |
Correlation of superhydrophilicity and photocatalytic activity in the TiO2-based porous thin films
Chai SY, Park JK, Kim HK, Lee WI |
| 58 - 61 |
Photocatalytic properties of mesoporous TiO2 films derived from evaporation-induced self-assembly method
Pan JH, Chai SY, Lee WI |
| 62 - 65 |
Influence of deposition parameters on adhesion/cohesion of plasma sprayed TiO2 coatings
Chen H, Lee SW, Hur BY |
| 66 - 69 |
A comparison of different preparation methods of Fe-Mo-Mg-O catalyst for the large-scale synthesis of carbon nanotubes
Chen YF, Lim YS |
| 70 - 73 |
Photocatalytic characterization of plasma sprayed TiO2 coating in environmental engineering application
Kim TH, Lee SW, Chen H, Cho HY |
| 74 - 77 |
Microstructure characterization on TiO2 based anodes
Zeng Y, Chen KN, Wu W, Gao JH |
| 78 - 81 |
Preparation and antibacterial activity of silver ions-substituted hydroxyapatite/titania
Lv GY, Li YB, Yang AP, Zhang X, Yang WH, Li JD |
| 82 - 85 |
Photocatalytic decomposition of NO(x) using Ti-, V-, and Mo-MCM-41 catalysts
Hu Y, Matsuoka M, Anpo M |
| 86 - 89 |
Influence of doping on the antibacterial effect of TiO2 nanoparticles
Liu GM, Wang K, Zhou ZW |
| 90 - 93 |
Raman spectroscopic investigation of nitrogen-doped titanium dioxide nanoparticles
Shen YF, Xiong TY, Li TF, Yang K |
| 94 - 97 |
Characterization and synthesis of functional TiO2 sol-gel coatings on the glass
Shin DY, So MG, Han SM |
| 98 - 101 |
Photo-oxidation decomposition of TiO2 photocatalyst for the construction materials
Shin DY, Lee HJ, Yeon KS, Han SM |
| 102 - 105 |
Preparation of ternary compound BaLi2Ti6O14 by the sol-gel process.
Tovar LLG, Torres-Martinez LM |
| 106 - 109 |
Dependence of yellow phosphor on optical and electrical properties of the white light emitting diode chip
Son CS, Chang HJ, Jaekal KH, Chang YC, Lee SW |
| 110 - 113 |
Effect of hydrothermal conditions on the cation exchange capacity of MSWI fly ash
Shim YS, Lee WK |
| 114 - 117 |
Mechanical properties of nanocrystalline HVOF coatings
Hannula SP, Falt T, Turunen E, Manninen T |
| 118 - 121 |
Characterization of Li1-xN1+XO2 prepared by using tartaric acid as a complexing agent
Thongtem T, Thongtem S |
| 122 - 125 |
Nd3+-doped TiO2 nanoparticles prepared by sol-hydrothermal process
Kim EY, Kim YH, Whang CM |
| 126 - 129 |
The effect of substrates on the characteristics of titania nano-coated particles prepared by fluidized bed chemical vapor deposition (FBCVD)
Park J, Lee SY, Bae DH, Lim NY, Ha J |
| 130 - 133 |
Photocatalytic properties of TiO2 coatings prepared by cold spray process
Han JH, Lee SW, Lee EA, Xiong TY, Bao ZB, Du H |
| 134 - 137 |
Effects of constituents in bio/photocatalytic hydrogen production system using experimental design tool
Joo H, Lee S, Shul Y, Ha J |
| 138 - 141 |
Nanosized titanium oxynitride and molybdenum oxynitride particles assembled in mesoporous silica MCM-41
Zheng S, Gao L |
| 142 - 145 |
Simulation of electric upsetting and forging process for large marine diesel engine exhaust valves
Jeong HS, Cho JR, Lee NK, Park HC |
| 146 - 149 |
Appearance of indium oxide nanorods in MOCVD growth
Myung JH, Kim HW, Shim SH |
| 150 - 153 |
Compressive deformation behaviour of a closed-cell aluminum
Yamada Y, Banno T, Xie ZK, Wen CE |
| 154 - 157 |
A simple reliable method of selecting epoxy molding compounds for high power short wavelength light emitting diode packages
Lee C, Kang S, Yim K, Kim S, Kim H |
| 158 - 161 |
Evaluating the electrochemical properties in the protection potential of material for use in Al vessels in seawater
Kim SJ |
| 162 - 165 |
A slow strain rate test experiment to evaluate the characteristics of high-strength Al-Mg alloy for application in ships
Kim SJ, Jang SK |
| 166 - 169 |
Effects of current density on the formation of anodic oxide films on AZ91
Kim SJ, Kim JI |
| 170 - 173 |
CdSe/ZnS quantum dots loaded solid lipid nanoparticles: Novel luminescent nanocomposite particles
Liu W, Liang JG, Zhu YL, Xu HB, He ZK, Yang XL |
| 174 - 177 |
Corrosion behavior of chromium cast iron and steel in hot concentrated alkaline
Tu XH, Liu JQ, Li W, Su JY |
| 178 - 181 |
In-situ joining of combustion synthesized Ni-Al alloys with Al casting alloy
Cho GS, Lee KR, Choe KH, Lee KW, Ikenaga A |
| 182 - 185 |
Evaluation of microstructure on SiCp/AZ91 magnesium composite fabricated by rotation-cylinder method
Lee JI, Hong TW, Kim YJ, Kim JS, Park HK |
| 186 - 189 |
Sliding friction and wear properties of composite reinforced by mullite
Lee HY, Cho BR |
| 190 - 193 |
Enhancement of the characteristics of the ALD HfO2 film by using the high-pressure D-2 annealing
Baik KH, Ahn SJ, Park CG, Lee S, Ahn S |
| 194 - 197 |
Improvement of the core loss of SiFe by optimizing the operation conditions of the laser scribing
Ahn SJ, Park CG, Lim JS, Baik KH, Kim DW, Kim HS, Ahn S |
| 198 - 201 |
Nanocrystalline structure of organic photoconducting materials derived by microwave recrystallization method
Park JH, Hwang CH, Son DH, Hong SS, Park HC, Park SS |
| 202 - 205 |
Microstructures and wear properties of Al matrix composites fabricated by two different processes
Kim YS, Kim KT, Kim SJ, Kim JD |
| 206 - 209 |
Dispersion stability of Ni nanoparticles in ethanol with poly (1-vinyl-2-pyrrolidone)
Lee EH, Lee MK, Rhee CK |
| 210 - 213 |
Effect of heat treatment on microstructure, tensile properties and damping capacity of Mg-Zr wrought alloy
Jun JH, Lee GH, Kim JM, Kim KT, Jung WJ |
| 214 - 217 |
Microstructures and mechanical properties of Mg-Zn-RE-Ca casting alloys
Jun JH, Park BK, Kim JM, Kim KT, Jung WJ |
| 218 - 221 |
Characteristics of thin film of nano-hybrid synthesized from acrylic resin and colloidal silca-silane sol
Kang DP, Park HY, Kang YT, Na MK, Lee HW |
| 222 - 225 |
Properties of coating films synthesized from nano colloidal silica and alkoxy silanes
Park HY, Kang DP, Myung IH, Yoon SY |
| 226 - 229 |
Effect of processing parameters on the fabrication of Al2O3p/Al composites by in-site reaction process of molten Al
Kim HJ, Kim JD, Kim MH, Koh SW, Kim YS, Ryu JI, Um YS |
| 230 - 233 |
Effects of processing parameters on the mechanical properties of SiCp/AC8A composites by pressureless metal infiltration process
Kim JD, Kim HJ, Koh SW |
| 234 - 237 |
Wear characteristics of particulate reinforced metal matrix composites fabricated by a pressureless metal infiltration process
Kim JD, Kim HJ, Koh SW |
| 238 - 241 |
Modification of Mg2Si morphology in As-cast Mg-Al-Si alloys with strontium and antimony
Nam KY, Song DH, Lee CW, Lee SW, Park YH, Cho KM, Park IM |
| 242 - 245 |
Chipless forming process using rotary swaging machine with four-dies
Lim SJ, Na KH, Lee CH |
| 246 - 249 |
Microstructure analyses and FE simulation of automotive product in the hot forging process using aluminum alloys
Lim SJ, Lee GA, Jeong HG, Choi S, Lee CH |
| 250 - 253 |
Castability, tensile and creep properties of Mg-xAl-Zn with variation of Al content
Song DH, Lee CW, Nam KY, Lee SW, Park YH, Cho KM, Park IM |
| 254 - 257 |
Development of manufacturing process using cold incremental forming technique for micro-alloyed non-heat-treated material
Lee HW, Lee GA, Yoon DJ, Choi S, Lee NK, Lee HJ, Bae SM |
| 258 - 261 |
Development of cube-textured Ni and Ni-W alloy tapes by focused infrared heating
Chung JK, Bae SY, Lee SG, Park C, Yoo SI, Kim CJ |
| 262 - 265 |
Shape memory effect and superelasticity of an equiatomic Ti-Ni alloy with surface sulfide layers
Nam TH, Hur SG, Lee JH, Cho GB |
| 266 - 269 |
Electrochemical and structural properties of Si/Ni/Cu electrode films fabricated with different methods
Cho GB, Lee BK, Sin WC, Nam TH |
| 270 - 273 |
Reciprocating sliding wear behavior of inconel 600 mated with SUS 304 stainless steel at elevated temperatures
Lee KY, Hwang CS, Kim SJ, Kim GG, Kim JH, Yoon CS |
| 274 - 277 |
The cavitation behavior of Fe-Cr-C-Si-Ni alloys
Kim JH, Na KS, Kim SJ |
| 278 - 281 |
Effect of tin on the microstructures and mechanical properties of a Au-Pt-Cu alloy
Kim MH, Lee SH, Lim HN, Doh JM, Baik HG |
| 282 - 285 |
Effect of indium on bonding between porcelain and Au-Pt-Cu alloy
Lee SH, Jung HY, Doh JM, Yoon JK, Lim HN |
| 286 - 289 |
Fabrication and magnetic properties of mullite based nanocomposites with embedded FeCr alloy nanoparticles
Wang H, Wang WM, Fu ZY, Sekino T, Niihara K |
| 290 - 293 |
Al-La-Ni-Fe amorphous alloys and amorphous-crystalline composites produced by mechanical alloying
Choi PP, Kim JS, Nguyen OTH, Kwon DH, Kwon YS |
| 294 - 297 |
Net-shape forming of TiAl automotive parts for fuel efficiency
Sung SY, Kim YJ |
| 298 - 301 |
Effect of Al on microstructural and mechanical characteristics of plasma electrolytic oxide coatings on magnesium
Yu BG, Kim Y, Kang KM, Chang SY |
| 302 - 305 |
Effect of impurity and gas nature on microstructure of SiC microtubes in double step reaction process
Myoung SW, Kang JH, Park SH, Lee SS, Joo DW, Jung YG |
| 306 - 309 |
Modified fabric and its electromagnetic protection characteristics
Zhang XN |
| 310 - 313 |
Interfacial reaction between molten Al alloys and titanium matrix composites
Sung SY, Choi BJ, Lee SH |
| 314 - 317 |
Preparation and characterization of chemical activated fibers on various carbon fibers
Moon SY, Kim MS, Lim YS |
| 318 - 321 |
Fabrication of Ni sulfides by thermal sulfidation
Nam TH, Yu CA, Jung DW, Cho KK |
| 322 - 325 |
Fabrication of nickel-silver rods and plate through a small cross section continuous casting process
Cho H, Choi HS, Jo HH |
| 326 - 329 |
Combinational effects of Ni precursors on Ni/YSZ cermet anode
Han KR, Jung Y, Kim CS, Lee H |
| 330 - 333 |
Optimization of sheet metal process parameters of a shield case piece using computer simulation
Curiel MC, Aum HS, Lira-Olivares J |
| 334 - 337 |
Development of 2-cavity die casting process for AM50 Mg steering column lock housing module
Kim SK |
| 338 - 341 |
Synthesis nanosized MgAl2O4 spinel powder with excellent sinterability
Lee PY, Suematsu H, Yatsui K, Niihara K |
| 342 - 345 |
High temperature deformation behavior of pre-sintered Al-10Si-5Fe based alloy
Lee DS, Jung TK, Shim GS, Kim MS, Kim WY, Yamagata H |
| 346 - 349 |
Mechanical behavior of TiB2 nanoparticles reinforced Cu matrix composites synthesized by in-situ processing
Kwon DH, Huynh KX, Nguyen TD, Choi PP, Chang MG, Yum YJ, Kim JS, Kwon YS |
| 350 - 353 |
Microstructures and tensile properties of Fe-40Al intermetallic with high boron content
Lee JH, Byeon JW, Kwun SI, Hong SJ, Huh JG, Hyun CY |
| 354 - 357 |
Fluidity of A356 alloy during in-ladle DTC rheocasting
Lee JK, Jo HH, Yoon YO, Ha SH, Kim SK |
| 358 - 361 |
High temperature mechanical properties of Ni-Al-Cr based alloys with refractory alloying elements
Kim WY, Kim HS, Yeo ID, Kim MS |
| 362 - 365 |
Microstructural control of 7075 Al wrought alloys through thixoextrusion route
Yoon YO, Jo HH, Lee JK, Jang DI, Kim SK |
| 366 - 369 |
Thermal and phase evolutions of as-milled powders fabricated by mechanical alloying in the TiH2-C system.
Bae SY, Ahn IS, Sung TK, Park DK |
| 370 - 373 |
H2S/CO2 corrosion behavior of tubular goods under high temperature and high pressure
Zhou Q, Ma Q, Yi YQ, Liu JJ, Xu HL |
| 374 - 377 |
Improved heat and corrosion resistance of Mg-Al-Zn alloys by additions of minor alloying elements
Kim JM, Park BK, Jun JH, Kim KT, Jung WJ |
| 378 - 381 |
Characteristics of spent foundry sand - loess mixture as ceramic support materials
Rhee SW, Lee WK |
| 382 - 385 |
The transfection efficacy of chitosan-DNA nanoparticles on MGC803, SMMC-7721, MG63 cells
Chen S, Zhang B, Ren L, Sun LP, Zhang QQ |
| 386 - 389 |
Characteristic evaluation of extrusion parameters on direct extrusion process of 3003 Al alloy used for automotive condenser tubing
Jo HH, Hwang DY, Cho H |
| 390 - 393 |
Vacuum diffusion brazing of Al5052 alloys using Ag-28Cu insert metal
Lee YS, Seo KW, Lee CH, Lim CH, Lee CH |
| 394 - 397 |
Morphological evolution of primary solid phase in semi-solid slurry during the isothermal holding
Kang SW, Kim KB, Lee DY, Mun JH, Yoon EP |
| 398 - 401 |
Thermal conductivity of hot-pressed BN ceramics
Lee SK, Nakamura K, Kume S, Watari K |
| 402 - 405 |
Evaluation of oxidation behavior of the C-B4C-SiC composite through continuous measurement of mass change and gas concentration
Uchiyama Y, Abe Y, Bin Zheng G, Sano H |
| 406 - 409 |
Modeling for optimum thermal property of wave-typed heat sink by computational simulation
Yu BG |
| 410 - 413 |
High temperature oxidation of TiAI(La)N coating deposited on a steel substrate by arc-ion plating
Shapovalov YA, Lee DB |
| 414 - 417 |
High temperature oxidation of WC-ZrN superhard nanocomposite film
Lee DB, Shapovalov YA |
| 418 - 421 |
High temperature oxidation of electroplated Cr-C coating
Lee DB, Kwon SC |
| 422 - 425 |
Cyclic-oxidation of Ti3SiC2 and Ti3AlC2 between 900 and 1200 degrees C in air
Lee DB, Han JH, Kim YD, Park SW |
| 426 - 429 |
Synthesis and structural investigation of nano-sized BaTiO3 powders
Moon SM, Cho NH |
| 430 - 433 |
Analysis of deformation characteristics in wave-typed heat sink composed of fin and base
Yu BG, Kim Y, Chang SY |
| 434 - 437 |
Thermal stability of 40Cr steel with surface nanocrystallization
Liu YL, Xiong TY, Yang K |
| 438 - 441 |
Recrystallization behaviors and high temperature tensile properties of Mg-Al-Sn-(Zn) wrought alloys
Kim JM, Lee JM, Jun JH, Kim KT, Jung WJ |
| 442 - 445 |
Improvement of corrosion resistance of stainless steel by ZrO2-SiO2 sol-gel coatings
Shin DY, Kim KN, Nam IT, Han SM |
| 446 - 449 |
Fabrication of nano-sized gold dot array using bi-layer nano imprint lithography
Yang KY, Hong SH, Lee H, Choi JW |
| 450 - 453 |
Microstructure evolution with solidification rates in IN 738LC superalloy
Kim HC, Kim YH, Jung YG, Lee JH, Jo CY, Paik U |
| 454 - 457 |
TGO growth behavior with thermal fatigue and its effect on fracture behavior of thermal barrier coatings
Kwon JY, Jang HJ, Jung YG, Paik U |
| 458 - 461 |
Relationship between microstructure and tensile strength in the directionally solidified (23-27) at. % Al-Ni alloys
Lu Y, Kim HC, Lee JH, Oh MH, Wee DM, Hirano T |
| 462 - 465 |
Sub-100nm hybrid stamp fabrication by hot embossing
Hong SH, Yang K, Lee H |
| 466 - 469 |
Characterization of Fe-Mo alloyed nanoparticles synthesized by chemical vapor condensation process
Ha JK, Cho KK |
| 470 - 473 |
Growth of CNTs on 304 stainless steel using sparked iron as a catalyst
Thongtem S, Singjai P, Thongtem T, Daothong S |
| 474 - 477 |
Abnormal grain growth mechanism in alumina
Bang HG, Song JH, Park SY |
| 478 - 481 |
Effect of MgF2 additive on the mechanical properties in hydroxyapatite/zirconia composites
Kim SH, Lee HC, Bang HG, Park SY |
| 482 - 485 |
Estimation of low cycle fatigue life on the accumulated hysterisis energy of Delta sigma.epsilon(p) for direct aged alloy 718. (Ni-based superalloys)
Choe BH, Shin JK, Shin SK, Lee JH, Paik U, Yeom JT, Park NK |
| 486 - 489 |
The XPS and GDS study of SrBi2Ta2O9/ZrO2/Si (MRS) structure according to heat treatment effects of ZrO2 buffer layer
Park CH, Son YG |
| 490 - 493 |
Effect of slag layer on flow patterns in a gas stirred ladle
Cho SH, Hong SH, Han JW, You BD |
| 494 - 497 |
Effect of melt depth and nozzle type on the mixing behavior in bottom-blown steelmaking ladle - A water model approach
Cho SH, Kim CW, Han JW, You BD, Kim DS |
| 498 - 501 |
The effect of cold equal channel angular process on texture of magnesium alloy (AZ31)
Lim HT, Kang JH, Han JW, Hwang SK, Kim WY |
| 502 - 505 |
Kinetic analysis of the decomposition of calcium carbonate using Danyang limestone
Cho SH, Joo SM, Cho JS, Yu YH, Ahn JW, Han C, Kim H |
| 506 - 509 |
Effect of frit content in Ag paste and thickness of transparent dielectric on yellowing phenomenon
Jeon JS, Cha MR, Kim NS, Kim HS |
| 510 - 513 |
Effect of thereto-mechanical variables on the dynamic ferrite transformation induced by hot deformation in 0.22C-Mn steel
An JY, Kwon Y, Kim SI, Lee DL, Lee C, Hwang SK, Yoo YC |
| 514 - 517 |
Formation of ultra fine ferrite and determination of critical strain in the strain induced dynamic transformation for 0.22C-Mn steel
Lee SM, Kwon Y, Lee DL, Cho SH, Hwang SK, Yoo YC |
| 518 - 521 |
Prediction of flow curves and micro-structural evolution in strain induced dynamic transformation of low carbon steel
An JY, Kwon Y, Kim SI, Lee DL, Yoo YC |
| 522 - 525 |
Textures and mechanical properties of melt-extruded Al-Cu alloys
Lee BS, Joo DH, Ryou M, Kim MH |
| 526 - 529 |
Effect of electromagnetic stirring on orientation distribution function of primary solid phase of Al-Cu alloy
Lee DY, Han JH, Kang SW, Mun JH, Kim KB |
| 530 - 533 |
Cell sensing margin of lead-free (Bi,La)(4)Ti3O12 thin film deposited on MTP cell structure in high density FeRAM device
Choi JH, Yoo HS, Cho KW, Kim NK, Oh SH, Choi ES, Yeom SJ, Sun HJ, Lee SS, Lee KN, Hong SK, Hong TW, Kim IH, Ryu SL, Kweon SY |
| 534 - 537 |
Hydrogen absorption kinetics of Ti-Nb-Cr alloys
Shin K, Seok S, Kweon SY, Kim IH, Lee YG, Hong TW |
| 538 - 541 |
Effects of La2O3 on the piezoelectric properties of lead-free (Bi0.5Na0,5)(0.94)Ba0.06TiO3 piezoelectric ceramics
Son YJ, Choi YG, Kwon JC, Cho KW, Kim YM, Kweon SY, Hong TH, Lee YG, Ryu SL, Yoon MS, Ur SC |
| 542 - 545 |
Quantitative analysis of micro-macro domain transition of PNN-PT-PZ(x) system at higher PZ content
Yoon MS, Ur SC |
| 546 - 549 |
Effects of void formation within the pb-free BGA solder balls on the mechanical joint strength
Kim JW, Jung SB |
| 550 - 553 |
Interfacial reaction and joint strength on CuUBM with Pb-free flip chip solder bumps
Kim DG, Ha SS, Jung SB |
| 554 - 557 |
TEM observation of interfacial reaction layers formed between Pb(lead)-free Sn-3.5Ag solder and ENIG plated Cu substrate
Yoon JW, Jung SB |
| 558 - 561 |
Reliability of Sn-Ag-Cu flip chip package with underfill under thermal shock
Noh BI, Jung SB |
| 562 - 565 |
The effect of boron on the sliding wear behavior of iron-based hardfacing alloys for nuclear power plants valves
Yoo JW, Lee KY, Kim JH, Kim KS, Kim SJ |
| 566 - 569 |
Sliding wear behaviors of steam generator tubes in various environments
Kim GG, Noh SD, Park GS, Kim SJ, Lee DH, Hur DH, Choi MS, Han JH |
| 570 - 573 |
Fabrication of lead free micro solder powder by melts dispersion technique
Youn JI, Ha W, Kim YJ |
| 574 - 577 |
Etching mechanism of Pb-free glasses in acid solution for barrier ribs in plasma display panel
Kim JM, Kim HS |
| 578 - 581 |
Thermal properties of Bi2O3-B2O3-ZnO glass system
Kim YJ, Hwang SJ, Kim HS |
| 582 - 585 |
Formation of layer on bismate frit surface during wet milling
Cha ML, Hwang SJ, Kim HS |
| 586 - 589 |
Development of novel wastewater reclamation system using microfiltration with advanced new membrane material and electrodialysis
Kim JO, Jeong JT, Kim SK, Kim RH, Lee YJ |
| 590 - 593 |
Changes in adsorption characterization of MSWI fly ash by NaOH treatment (I)
Shim YS, Lee WK |
| 594 - 597 |
Evaluation of pelletized adsorbent made for removing VOCs by MSWI fly ash (II)
Shim YS, Yoo YS, Rhee SW, Lee WK |
| 598 - 601 |
The effect of meta kaolines on the activation of waste concrete sludges
Kim JJ, Youn SH, Hwang KH, Yoon JB, Lee SG, Jun BS, Lee JK, Yoon SY, Kim H |
| 602 - 605 |
Fabrication characteristics of mineral wool fiber used the waste
Kang KH, Kim SY, Um YS, Hur BY |
| 606 - 609 |
Application of media manufactural by waste plastic to stormwater treatment in urban drainage system
Kim SK, Yun SL, Kim YI, Kang SW, Lee YJ |
| 610 - 613 |
Recycling of waste coal fly ash: Synthesis of zeolite-like minerals from residue yielded by extraction of aluminum ions
Ryu MS, Sin HG, Park SH, Yoon SY, Stevens R, Park HC |
| 614 - 617 |
Polymer/inorganic composite materials for quick repair of cement concrete pavement
Ding H, Xiang RL, Song ZM, Yu ZL |
| 618 - 621 |
Luminescence porous ceramics using recycling glass
Matsushita J, Yasumatsu S, Hosaka N, Okawa K, Fujita T, Li JB, Lin H, Shim KB |
| 622 - 625 |
Effect of pair-mineralizer on the reaction of alite and calcium langbeinite formation
Kwon WT, Kim YP, Kim Y, Kim SR, Bae SY |
| 626 - 629 |
Zeolite synthesis from coal bottom ash for recycling as an absorbent of heavy metals
Ahn JW, Han GC, You KS, Um NI, Cho HC |
| 630 - 633 |
Stabilization behavior of heavy metals derived from wastes on cementitious minerals and hydrates
Ahn JW, You KS, Han GC, Cho KH |
| 634 - 637 |
Effect of slag compositions on the extraction of metallic components from the used PCB
Jang SH, Han JW, Jeong JK, Lee JC |
| 638 - 641 |
Low temperature synthesis of porous cordierite from fly ash
Kim SJ, Bang HG, Park SY |
| 642 - 645 |
Fabrication and characterization of porous ceramic panel using recycled glass powder
Lim TY, Park YM, Hwang JH, Kim CY, Kim CY |
| 646 - 649 |
Formation characterization of ultra-fine Cu powder from Cu(OH)(2) slurry by wet reduction method
Ahn JG, Kim DJ, Hoang H, Lee J, Chung HS |
| 650 - 653 |
Characterization of friction materials reinforced by porous mullite
Cho BR, Lee HY |
| 654 - 657 |
A study of Ga2O3 nanomaterials synthesized by the thermal evaporation of GaN powders
Kim HW, Myung JH, Shim SH |
| 658 - 661 |
Characteristics of SnO2 one-dimensional nanomaterials synthesized on TiN-coated substrates by the evaporation of Sn powders
Kim HW, Shim SH, Myung JH |
| 662 - 665 |
Self-propagating high-temperature synthesis for aluminum oxynitride (AION)
Lee J, Lee I, Chung H, Ahn J, Kim D, Kim B |
| 666 - 669 |
Effect of hydrogen content on characteristics of Cu/C : H films coated on polyethylene terephthalate substrate prepared by ECR-MOCVD coupled with a periodic DC bias
Lee JK, Jeon BJ, Lee S |
| 670 - 673 |
Effects of annealing atmosphere on the optoelectrical properties of ZnO thin films grown by atomic layer deposition
Lee C, Park Y, Park A, Kim C |
| 674 - 677 |
Sputter-deposited Cr as an alternative to electroplated Cr
Lee C, Kim K, Lim J |
| 678 - 681 |
Environmentally friendly polyurea microcapsules of pesticides by PVA mediated interfacial polymerization
Paik S |
| 682 - 685 |
Removal of bilirubin by albumin-fixed polysulfone membrane
Ge DT, Shi W, Ren L, Zhang QQ |
| 686 - 689 |
Effects of anodizing time on anodizing of Mg-Al alloy in alkaline solution
Kim SJ, Kim JI |
| 690 - 693 |
Energy efficiency alloy design in PSN-PMN-PZT ceramic system for piezoelectric transformer application
Choi YG, Son YJ, Kwon JC, Cho KW, Kweon SY, Hong TW, Lee YG, Ryu SL, Kim IH, Yoon MS, Ur SC |
| 694 - 697 |
Vibration-damping capacity of lotus-type porous magnesium at room temperature
Xie ZK, Banno T, Yamada Y, Tane M, Hyun SK, Okuda Y, Nakajima H |
| 698 - 701 |
Microstructural transformations of an amorphous Fe90Zr10 alloy induced by high-energy ball-milling
Choi PP, Kwon YS, Kim JS, Kwon DH |
| 702 - 705 |
A study for microwave enhanced synthesis of NIR absorbing materials
Im JU, Yu CY, Yoo JY, Son SM, Lee GD, Park SS |
| 706 - 709 |
Hydrothermal syntheses of nickel nanosheets and their morphology
Jun SY, Ryou KD, Hong SS, Lee GD, Park HY, Kang DP, Park SS |
| 710 - 713 |
Characterization of Ni nanopowders produced by electrical explosion of wire technique
Kim HT, Seo WS, Kwon DH, Choi PP, Kim JS, Kwon YS |
| 714 - 717 |
Effect of physical and chemical change of lignocellulosic fiber on heavy metal ion removal
Lee BG, Lee HJ, Shin DY |
| 718 - 721 |
Surface characteristics of the engineered polymetric media for filtration and adsorption in urban runoff
Kang SW, Kim SK, Kim YI, Yun SL, Lee TY |
| 722 - 725 |
Preparation of nickel powders by the reduction of hydrazine of Ni(OH)(2) reactant slurries from nonaqueous media
Do Kim Y, Choi EY, Lee YB, Kim YS, Kim HK, Kim KH |
| 726 - 729 |
Synthesis of nickel powders by the reduction of hydrazine from diethanolamine solution
Kim YD, Choi EY, Lee YB, Kim YS, Kim HK, Kim KH |
| 730 - 733 |
Mechanical properties of copper hollow sphere manufactured by sintering process
Koo JM, Jung SB |
| 734 - 737 |
Nano scale material property measurement of MEMS material using piezo actuated material testing machine
Lee HJ, Lee NK, Lee HW, Park HJ, Choi TH |
| 738 - 741 |
Effect of indium on the microstructures and mechanical properties of dental gold alloys
Jung HY, Lee SH, Doh JM, Yoon JK, Lim HN |
| 742 - 745 |
Rheological characteristics of Mg-Al alloys with ceramic particles for meta foam
Park SH, Song KH, Um YS, Hur BY |
| 746 - 749 |
An amperometric biosensor using Prussian blue modified electrode
Yi IJ, Kim JH, Kang CJ, Park J, Kim YS |
| 750 - 753 |
Preparation of activated carbon fibers by chemical activation method with hydroxides
Moon SY, Kim MS, Hahm HS, Lim YS |
| 754 - 757 |
Preparation of porous hydroxyapatite scaffolds for bone tissue engineering
Min SH, Jin HH, Park HY, Park IM, Park HC, Yoon SY |
| 758 - 761 |
Synthesis of biodegradable beta-TCP/PLGA composites using microwave energy
Jin HH, Min SH, Hwang KH, Park IM, Park HC, Yoon SY |
| 762 - 765 |
Synthesis and magnetic properties of Fe/SiO2 nanocomposite powders by the chemical vapor condensation process
Kim JC, Lee JW, Park BY, Choi CJ |
| 766 - 769 |
Fabrication of nanoscale SiC-based ceramic patterns with near-zero residual layers by using imprinting technique and reactive ion etching
Park KH, Park JH, Kim DP |
| 770 - 773 |
Preparation of silver metallic sponge from macroporous carbon template
Yan J, Wang A, Kim DP |
| 774 - 777 |
Synthesis of polymeric precursor for oxidation-resistant SiCBN ceramic microstructure via soft lithography
Nghiem QD, Pham AT, Kim DP |
| 778 - 781 |
Influence of the cup's edge geometry on the transferred stresses to the ball/cup interface in all ceramic THR
Carrillo DG, Lee SW, Lira-Olivares J |
| 782 - 785 |
Effect of pouring temperature and holding time at semi-solid region on the morphology of primary solid phase in semi-solid slurry
Kang SW, Kim KB, Lee DY, Mun JH, Yoon EP |
| 786 - 789 |
Fabrication and microstructure of ZnO-TiO2 composite membranes by a reverse micelle and sol-gel processing
Bae DS, Kim BI, Han KS |
| 790 - 793 |
Fabrication and microstructure of ZnO-SiO2 nanoparticles by a reverse micelle and sol-gel processing
Kim RH, Kim JW, Park KS, Bae DS |
| 794 - 797 |
Investment casting of Ti alloys for biomedical application
Sung SY, Kim YJ |
| 798 - 801 |
Controlled release of active substance from biodegredable copolymer matrix
So HS, Shin HC, Kim BS, Yoo YS |
| 802 - 805 |
Comparison of silicon coatings deposited by vacuum plasma spraying (VPS) & atmospheric plasma spraying (APS)
Niu YR, Liu XY, Ding CX |
| 806 - 809 |
Environmentally conscious gas mixtures for magnesium melt protection
Ha W, Youn JI, Kim YJ |
| 810 - 813 |
Hydrogen permeation and surface characteristics of Pd-coated Ni-Nb-Ta amorphous alloy membrane
Kim K, Kim K, Kim YC, Lee DY, Kim DH |
| 814 - 817 |
Comparison of hydroxyapatite synthesized under different conditions
Mo LR, Li YB, Lv GY, Li JD, Zhang L |
| 818 - 821 |
Densification mechanism of fine Ni-20Cr powder during pulsed electric current sintering
Nanko M, Sato M, Matsumaru K, Ishizaki K |
| 822 - 825 |
Influence of two-step sintering on transparency of high purity alumina
Sung RJ, Kim DS, Ji SA, Park JS, Kim SW |
| 826 - 829 |
Radio frequency interference characteristics of plate-like soft magnetic powders-polymer composites
Kim SW, Yoon YW, Kim GY, Lee KS |
| 830 - 833 |
Synthesis and properties of bulk amorphous/nanocrystalline aluminum alloy composites
Noh SJ, Jung TK, Lee DS, Kim MS, Yi S |
| 834 - 837 |
Design for environment (DfE) of ultralight aluminum camshaft development
Kim SK |
| 838 - 841 |
Tribological analysis of Al2O3/TiO2/ZrO2 nanocomposites as an alternative for THR materials
Visbal S, Lee SW, Morillo C, Carrillo DG, Lira-Olivares J |
| 842 - 845 |
The characteristic of the La3Ga5SiO14 single crystal grown by vertical Bridgman method in Ar atmosphere
Bamba N, Kato K, Taishi T, Hayashi T, Hoshikawa K, Fukami T |
| 846 - 849 |
Preparation and characterization of a new type of Sr-contained hydroxyapatite bone cement
Guo DG, Han Y, Xu KW |
| 850 - 853 |
High grade purification of sericite by hydrocyclone and magnetic separation
Kim KN, Shin DY, Park H |
| 854 - 857 |
Fabrication and properties of high strength Al-8Fe-2Mo-2V-1Zr alloy produced by melt spinning techniques
Jung TK, Lee DS, Kim MS, Kim WY |
| 858 - 861 |
Low elastic modulus beta Ti-Nb-Si alloys for biomedical applications
Kim WY, Kim HS, Yeo ID |
| 862 - 865 |
Surface modification of glass plate to enhance thickness of silica aerogel
Heo D, Jun B, Oh YJ |
| 866 - 869 |
Synthesis of ALON refractory raw materials from aluminum dross using thermite reaction process
Joo H, Yun J, Hwang K, Jun B |
| 870 - 873 |
Thermopneumatic-actuated polydimethylsiloxane (PDMS) microfluidic system
Yoo JC, Kang CJ, Jeon D, Kim YS |
| 874 - 877 |
Process development for cost-effective Ag-Ni contact materials by simple solidification control
Yoon YO, Lee JK |
| 878 - 881 |
Novel method to fabricate porous n-HA/PVA hydrogel scaffolds
Mu YH, Li YB, Wang MB, Xu FL, Zhang X, Tian ZY |
| 882 - 885 |
Biomimic tubulose scaffolds with multilayer prepared by electrospinning for tissue engineering
Qi HX, Kong SL, Hu P, Zhang J, Lin WJ, Song F |
| 886 - 889 |
A fast and low temperature eco-process for alloy's joining
Fu ZY, He DH, Zhang JY, Wang WM, Wang H, Zhang QJ |
| 890 - 893 |
Antibacterial effect and security evaluation on nano-hydroxyapatite bearing Cu2+ and Zn2+
Li JD, Li YB, Zuo Y, Lv GY, Yang WH, Tian ZY |
| 894 - 897 |
Study on improving stainless steel antibacterial capability
Yang WH, Li YB, Wu L, Yang AP, Li JD, Li H |
| 898 - 901 |
Influences of the crystallization behavior of n-HA reinforced PA66 biocomposite on its mechanical properties
Zhang X, Li YB, Zuo Y, Lv GY, Mu YH |
| 902 - 905 |
Foaming characteristics of Al-Mg alloy foam
Kim SY, Um YS, Hur BY |
| 906 - 909 |
Fabrication of porous clay materials with aligned pore structures by freeze-drying
Hwang HJ, Kim DY, Moon JW |
| 910 - 913 |
Solvents effects on physicochemical properties of nano-porous silica aerogels prepared by ambient pressure drying method
Lee SH, Lee EA, Hwang HJ, Moon JW, Han IS, Woo SK |
| 914 - 917 |
Estimation of environment-friendly permeable pavement at laboratory test
Kim RH, Jeong JW, Lee SH, Gee CS |
| 918 - 921 |
Development of fiber filter media to control heavy metals and nutrients in urban stormwater runoff
Kim RH, Lee SH, Jeong JW, Gee CS |
| 922 - 925 |
Use of bauxsite minerals to control pollutant outflow in urban areas
Kim RH, Jeong JW, Lee SH, Gee CS |
| 926 - 929 |
Preparation of SiC nanoporous membrane for hydrogen separation at high temperature
Kim Y, Kim SR, Cho KH, Bae SY, Kwon WT |
| 930 - 933 |
Kinetics of the SiC formation from carbon thin film and SiO gas
Sano H, Karasuyama H, Zheng GB, Uchiyama Y |
| 934 - 937 |
Modification of natural zeolite powder and its application to interior non-woven textile for indoor air quality control
Lim HM, Jung JS, Kim DS, Lee DJ, Lee SH, Kim WN |
| 938 - 941 |
Study on the biomimetic properties of bone substitute material: Nano-hydroxyapatite/polyamide 66 composite
Wu L, Li YB, Zu Y, Zhang L, Yang WH, Mu YH |
| 942 - 945 |
Via/hole filling by pulse-reverse copper electroplating for 3D SiP
Chang GH, Chang SY, Lee JH |
| 946 - 949 |
Electrical and luminescent properties of size controlled ZnO nanorods
Park JY, Oh CW, Kim JJ, Kim SS |
| 950 - 953 |
Structure and electrochemical properties of FeSx nanoparticles synthesized by chemical vapor condensation process
Ha JK, Cho KK, Kim KW, Kim JU, Kim YY |
| 954 - 957 |
Effect of nano-structures on the optical features of hydrogenated amorphous Si films
Park MB, Shim JH, Cho NH |
| 958 - 961 |
Photo- and electroluminescence of hydrogenated nanocrystalline Si prepared by plasma enhanced chemical vapor deposition techniques
Shim JH, Cho NH |
| 962 - 965 |
Nanostructural and optical features of nc-Si : H thin films prepared by plasma enhanced chemical vapor deposition techniques
Shim JH, Cho NH, Kim YJ, Whang CM, Cho WS, Yoo YC, Kim JG, Kwon YJ |
| 966 - 969 |
Effect of porosity on fatigue strength of lotus-type porous copper
Seki H, Yamazaki S, Otsuka M, Tane M, Hyun SK, Nakajima H |
| 970 - 973 |
Microstructure, mechanical property and antibacterial characteristics of ferritic stainless steel
Yang J, Zou DN, Li XM, Zhu J |
| 974 - 977 |
Effect of surface morphology on apatite formation
Zhao Y, Xiong TY, Liu YL, Li TF, Wang LB |
| 978 - 981 |
Effect of compatibilizers on the properties of nano-hydroxyapatite reinforced polyamide 66 and high density polyethylene blends
Zuo Y, Li YB, Zhang X, Yang WH, Li JD, Mo LR, Wang HN |
| 982 - 985 |
Study on the properties of microwave absorption of zinc oxide whisker
Chu LS, Zhou ZW, Zhao Y |
| 986 - 989 |
Preparation of single-phase aragonite precipitated calcium carbonate used as an inorganic eco-material
Ahn JW, Park HS, Kim JH, Cheong SH, Kim JA |
| 990 - 993 |
Inhibition mechanism of magnesium ion on carbonation reaction with Ca(OH)(2) and CO2
Kim JH, Ahn JW, Ko SJ, Park WK, Han C |
| 994 - 997 |
Hydraulic properties of tetracalcium aluminoferrite with adsorption of silicate ions
You KS, Ahn JW, Lee BH, Han C |
| 998 - 1001 |
Growth of ZnO thin films by metalorganic chemical vapor deposition using isopropyl alcohol for oxygen precursor
Park JY, Hong YS, Kim SS |
| 1002 - 1005 |
Growth of carbon nanorodes on tungsten filaments of light bulbs
Thongtem S, Singjai P, Thongtem T, Saksoangmuang P |
| 1006 - 1009 |
A tetragonal phase in Cr(N,O) thin film prepared by pulsed laser deposition
Inoue J, Nakayama T, Suzuki T, Suematsu H, Jiang WH, Niihara K |
| 1010 - 1013 |
Clarification of wire heating process in pulsed wire discharge with high-speed gas puff
Tokoi Y, Nakayama T, Suematsu H, Jiang W, Yatsui K, Niihara K |
| 1014 - 1017 |
Mechanical properties and machinability of Si3N4/hBN composites prepared by pressureless sintering
Cho WS, Lee KJ, Cho MW, Lee J, Hwang WS |
| 1018 - 1021 |
Micro groove forming on AlN/hBN composites using powder blasting process
Cho WS, Cho MW, Park DS |
| 1022 - 1025 |
Microstructural development of SiC ceramics by liquid-phase sintering with spark plasma sintering technique
Hotta M, Hojo J |
| 1026 - 1029 |
Change of formation yield and characterization of PCC particle synthesized with impurity ions contents by carbonation process
Cho JS, Joo SM, Cho SH, Yu YH, Kim IH, Kim H, Han C |
| 1030 - 1033 |
Fabrication of ceramic microchannels with tailored pores
Sung IK, Nghiem QD, Asthana A, Kim DP |
| 1038 - 1041 |
Electrical properties of (Ba,Sr)TiO3 thin films with self-seed layer deposited by RF magnetron sputtering
Park CH, Son YG |
| 1042 - 1045 |
Microstructure and electrical properties of R.F magnetron sputtering derived PZT thin films deposited on interlayer for pyroelectric IR sensor
Park CH, Son YG |
| 1046 - 1049 |
Factors of nozzle design affecting on supersonic flow in cold spray process
Jang SH, Park SH, Han JW, Lee CH, Kim HJ |
| 1050 - 1053 |
Preparation of electrically conducting ceramic foams
Ma YG, Kim EY, Yoon SH, Whang CM |
| 1054 - 1057 |
Silicon to silicon wafer bonding at low temperature using residual stress controlled evaporated glass thin film
Park JS, Choi YS, Kang SG |
| 1058 - 1061 |
Effect of the palladium mid-layer on the cyclic oxidation of platinum aluminide bond coating
Hong SJ, Choi JW, Hwang GH, Han WK, Park JS, Kang SG |
| 1062 - 1065 |
The effect of tungsten content on nanocrystalline structure of Ni-W alloy electrodeposits
Hwang WS, Cho WS |
| 1066 - 1069 |
Materials for devices applications in life sciences
Li GP, Bachman M |
| 1070 - 1073 |
Low-temperature thermoelectric properties of Zn4Sb3 prepared by hot pressing
Kim IH, Park JB, Hong TW, Ur SC, Lee YG, Ryu SL, Nakamoto G, Kurisu M |
| 1074 - 1077 |
Electrochemical characteristics of nano-silicon/graphite composite for the anode material of lithium secondary batteries
Lee JK, Park TJ |
| 1078 - 1081 |
Graphite/carbon nanofiber composite anode modified with nano size metal particles for lithium ion battery
Jin WJ, Kim TR, Moon SH, Lim YS, Kim MS |
| 1082 - 1085 |
Effects on the carbon matrix as conductor in sulfur electrode for lithium/sulfur battery
Choi YJ, Jeong SS, Kim KW, Ahn HJ, Ahn JH |
| 1086 - 1089 |
Fabrication and thermoelectric properties of p-type Bi1Sb4Te7.5 alloy doped with Fe3O4
Min W, Lee C, Park Y, Park I |
| 1090 - 1093 |
Characterization of a piezoresistive microcantilever as a sensor for detecting the bio-molecules
Yoo KA, Na KH, Joung SR, Jeon D, Choi YJ, Kim YS, Kang CJ |
| 1094 - 1097 |
Characterization of electrical properties of Si nanocrystals embedded in an insulating layer by scanning probe microscopy
Kim JM, Her HJ, Son JM, Khang Y, Lee EH, Kim YS, Choi YJ, Kang CJ |
| 1098 - 1101 |
Charge/discharge and electrochemical characteristics of secondary lithium/pyrite battery
Choi JW, Kim JU, Ryu HS, Ahn HJ, Ahn JH |
| 1102 - 1105 |
Microstructure and electrochemical properties of post heat-treated Li(Ni1/3Co1/3Mn1/3,)O-2 cathode materials for lithium ion battery
Kim SH, Shim KB, Han KR, Kim CS |
| 1106 - 1109 |
Effects of multiwalled carbon nanotubes on the cycle performance of sulfur electrode for Li/S secondary battery
Jeong SS, Choi YJ, Kim KW |
| 1110 - 1113 |
Thermoelectric properties of te doped CoSb3-4mol%Zn4Sb3
Jang KW, Kim IH, Lee JI, Choi GS |
| 1114 - 1117 |
Fabrication of YSZ thin-film for SOFC applied by electron beam PVD
Shin TH, Yu JH, Lee S, Han IS, Seo DW, Hong KS, Woo SK, Hyun SH |
| 1118 - 1121 |
Synthesis of ceria-coated copper oxide particles for direct hydrocarbon SOFCs anode
Lee J, Lee S, Lee EA, Hwang HJ |
| 1122 - 1125 |
Microstructure and thermoelectric properties of p-type Bi0.5Sb1.5Te3 compounds prepared by spark plasma sintering
Cho WS, Cho DC, Lim CH, Lee CH, Hwang WS, Yoo YC |
| 1126 - 1129 |
Effects of heat treatment on hardness of nanocrystalline Ni-W electrodeposits
Hwang WS, Lee JJ |
| 1130 - 1133 |
The effects of Si addition to the tin oxide thin films on the electrochemical characteristics for lithium secondary microbattery anode
Park CH, Son YG |
| 1134 - 1137 |
Effects of deformation on atmospheric corrosion of galvanized steel
Choi JW, Hwang GH, Cha HR, Kang SG |
| 1138 - 1141 |
Surface strengthening of polymer micromold using electroless Ni-P deposition
Choi JW, Hong SJ, Hwang GH, Kang SG |
| 1142 - 1145 |
Synthesis and analysis of nano-crystalline LiNiVO4
Thongtem T, Kaowphong S, Thongtem S |
