1625 - 1630 |
Epoxy-functionalized mesostructured cellular foams as effective support for covalent immobilization of penicillin G acylase Xue P, Xu F, Xu LD |
1631 - 1636 |
Effect of annealing temperature on the optical properties of thermally evaporated tin phthalocyanine thin films El-Nahass MM, Yaghmour S |
1637 - 1645 |
Lead-based titanate ferroelectric thin films fabricated by a sol-gel technique Wang DG, Chen CZ, Ma J, Liu TH |
1646 - 1653 |
Analysis of crack behavior for Ni-based WC composite coatings by laser cladding and crack-free realization Zhou SF, Zeng XY, Hu QW, Huang YJ |
1654 - 1660 |
Hydrogen permeation inhibition by zinc-nickel alloy plating on steel XC68 El Hajjami A, Gigandet MP, De Petris-Wery M, Catonne JC, Duprat JJ, Thiery L, Raulin F, Starck B, Remy P |
1661 - 1671 |
Effect of negative dc substrate bias on morphology and adhesion of diamond coating synthesised on carbide turning tools by modified HFCVD method Chattopadhyay A, Sarangi SK, Chattopadhyay AK |
1672 - 1680 |
Molybdate/phosphate composite conversion coating on magnesium alloy surface for corrosion protection Yong ZY, Zhu J, Qiu C, Liu YL |
1681 - 1685 |
Anisotropic growth of hydroxyapatite on the silk fibroin films Li YC, Cai YR, Kong XD, Yao JM |
1686 - 1691 |
Effects of annealing temperature on the crystal structure and properties of electroless deposited Ni-W-Cr-P alloy coatings Zhang L, Jin Y, Peng B, Zhang YF, Wang XJ, Yang QS, Yu J |
1692 - 1698 |
Laser cladding of SiC reinforced Zr65Al7.5Ni10Cu17.5 amorphous coating on magnesium substrate Yue TM, Su YP |
1699 - 1704 |
Infrared laser wavelength dependence of particles ablated from glycerol Fan X, Little MW, Murray KK |
1705 - 1711 |
Hydrophobicity in DLC films prepared by electrodeposition technique Paul R, Dalui S, Das SN, Bhar R, Pal AK |
1712 - 1718 |
Formation of surface periodic microstructure at laser irradiation of the multilayer Ni/Cu/Cr system Vasylyev MA, Nischenko MM, Tinkov VA, Sidorenko SI, Voloshko SM |
1719 - 1725 |
Synthesis and characteristics of continuous mesoporous carbon films by a rapid solvent evaporation method Wang XX, Li TH, Ji YB, Ai YL, Lin QL |
1726 - 1735 |
A comparative study of the growth of octadecyltrichlorosilane and 3-mercaptopropyltrimethoxysilane self-assembled monolayers on hydrophilic silicon surfaces Yang SR, Kolbesen BO |
1736 - 1740 |
Comparative study of compact hexagonal cluster self-diffusion on Cu(111) and Pt(111) Yang JY, Hu WY, Xu MC |
1741 - 1743 |
Hydrogen termination for extended queue times for low temperature epitaxy Brabant P, Ferrara J, Pagliaro B, Weeks K, Rittgers M, Scott R, Zhang Y, Landin T, Irving T, Spear J, Italiano J, Thomas SG |
1744 - 1749 |
Pre-doping effects on Ni fully silicided metal gate on SiO2 dielectric Wang BM, Ru GP, Jiang YL, Qu XP, Li BZ, Liu R |
1750 - 1753 |
Synthesis and characterization of spherical hollow composed of Cu2S nanoparticles Yang M, Yang X, Huai LF, Liu W |
1754 - 1758 |
Morphological and magnetic properties of cobalt nanoclusters electrodeposited onto HOPG Rivera M, Rios-Reyes CH, Mendoza-Huizar LH |
1759 - 1765 |
High temperature oxidation of stainless steel AISI316L in air plasma Vesel A, Mozetic M, Drenik A, Hauptman N, Balat-Pichelin M |
1766 - 1775 |
Nanometer-scale patterning of alkali halide surfaces by ion bombardment Saeed SR, Sinha OP, Krok F, Szymonski M |
1776 - 1781 |
Fabrication of super-hydrophobic surfaces on aluminum alloy substrates Fu XY, He XH |
1782 - 1789 |
Interfacial chemistry of organic conversion film on AZ61 magnesium alloy surface Yang X, Pan FS, Zhang DF |
1790 - 1795 |
Influence of RF power and fluorine doping on the properties of sputtered ITO thin films Nisha M, Jayaraj MK |
1796 - 1800 |
Easy and versatile functionalization of lithium niobate wafers by hydrophobic trichlorosilanes Bennes J, Ballandras S, Cherioux F |
1801 - 1805 |
Compositional, structural and mechanical characteristics of nc-TiC/a-C:H nanocomposite films Wang YH, Zhang X, Wu XY, Zhang HX, Zhang XJ |
1806 - 1810 |
Influence of Ag-doping on the optical properties of ZnO films Xue H, Xu XL, Chen Y, Zhang GH, Ma SY |
1811 - 1818 |
Adsorption and inhibitive properties of a new synthesized guanidine derivative on corrosion of copper in 0.5 M H2SO4 Khaled KF |
1819 - 1823 |
Studies on electrodeposited silver sulphide thin films by double exposure holographic interferometry Prabhune VB, Shinde NS, Fulari VJ |
1824 - 1829 |
Investigations on the nanocrystallization of 40Cr using ultrasonic surface rolling processing Ting W, Dongpo W, Gang L, Baoming G, Ningxia S |
1830 - 1835 |
Catalytic properties of molecular sieves MCM41 type doped with heteropolyacids for ethanol oxidation Popa A, Sasca V, Halasz J |
1836 - 1840 |
Stress relief patterns of hydrogenated amorphous carbon films grown by dc-pulse plasma chemical vapor deposition Wang Q, Wang CB, Wang Z, Zhang JY, He DY |
1841 - 1849 |
Diphosphonate thin films on zinc: Preparation, structure characterization and corrosion protection effects Pilbath A, Bertoti I, Sajo I, Nyikos L, Kalman E |
1850 - 1859 |
Investigation of thermally oxidised Mn-Co thin films for application in SOFC metallic interconnects Mardare CC, Asteman H, Spiegel M, Savan A, Ludwig A |
1860 - 1864 |
Improvement in the oxidation resistance of a gamma-TiAl-based alloy by sol-gel derived Al2O3 film Zhang XJ, Li Q, Zhao SY, Gao CX, Wang L, Zhang J |
1865 - 1869 |
Optimization of hybrid PVD process of TiAlN coatings by Taguchi method Yu DH, Wang CY, Cheng XL, Zhang FL |
1870 - 1873 |
The properties of La0.7Sr0.3MnO3 films prepared by dc magnetron sputtering using nanosized powder compacted target: Effect of substrate temperature Sahu DR |
1874 - 1879 |
Strong inter-conduction-band absorption in heavily fluorine doped tin oxide Canestraro CD, Oliveira MM, Valaski R, da Silva MVS, David DGF, Pepe I, da Silva AF, Roman LS, Persson C |
1880 - 1887 |
Processing conditions and microstructural features of porous 316L stainless steel components by DMLS Gu DD, Shen YF |
1888 - 1893 |
Stereoregular polyacrylamide and its copolymer brushes: Preparation and surface characters Jiang JG, Wang XS, Lu XY, Lu Y |
1894 - 1900 |
Surface modification of self-healing poly(urea-formaldehyde) microcapsules using silane-coupling agent Li HY, Wang RG, Hu HL, Liu WB |
1901 - 1905 |
SERS enhancement dependence on the diameter and aspect ratio of silver-nanowire array fabricated by anodic aluminium oxide template Du YB, Shi LF, He TC, Sun XW, Mo YJ |
1906 - 1910 |
Hydrogen adsorption on carbon nanocone material studied by thermal desorption and photoemission Yu XF, Tverdal M, Raaen S, Helgesen G, Knudsen KD |
1911 - 1915 |
Gravimetrical and chemical characterization of SiOx structures deposited on fine powders by short plasma exposure in a plasma down stream reactor Spillmann A, Sonnenfeld A, von Rohr PR |
1916 - 1920 |
Hybrid bulk heterojunction solar cells from a blend of poly(3-hexylthiophene) and TiO2 nanotubes Wang ZJ, Qu SC, Zeng XB, Liu JP, Zhang CS, Tan FR, Jin L, Wang ZG |
1921 - 1928 |
Formation of dense nitroxide radical layers on the Au(111) substrate for ESN-STM measurement Krukowski P, Kozlowski W, Olejniczak W, Klusek Z, Puchalski M, Dabrowski P, Kowalczyk PJ, Gwozdzinski K, Grabowski G |
1929 - 1933 |
Real-time kinetic modeling of YSZ thin film roughness deposited by e-beam evaporation technique Galdikas A, Cerapaite-Trusinskiene R, Laukaitis G, Dudonis J |
1934 - 1941 |
Growth, surface morphology, optical properties and electrical resistivity of epsilon-TiNx (0.4 <= x <= 0.5) films Kiran MSRN, Krishna MG, Padmanabhan KA |
1942 - 1945 |
Improved performance of organic light emitting diodes by pentacene as hole transporting layer Zhang FJ, Xu Z, Zhao SL, Zhao DW, Yuan GC, Cheng ZM |
1946 - 1958 |
Deconvolution of SIMS depth profiles: Towards simple and faster techniques Boulsina F, Berrabah M, Dupuy JC |
1959 - 1966 |
Field emission from strained carbon nanotubes on cathode substrate Mahapatra DR, Sinha N, Yeow JTW, Melnik R |
1967 - 1974 |
Oxidation behavior and kinetics of SiC/alumina-borosilicate coating for carbon-carbon composites Li J, Luo RY, Chen YP, Xiang Q, Lin C, Ding P, An N, Cheng JW |
1975 - 1981 |
Thermodynamics of pentachlorophenol adsorption from aqueous solutions by oxidized multi-walled carbon nanotubes Salam MA, Burk RC |
1982 - 1987 |
Hydrothermal self-assembling of ZnO nanorods into sphere-like superstructures and their optical characteristics Gao YJ, Zhang WC, Wu XL, Xia Y, Huang GS, Xu LL, Shen JC, Siu GG, Chu PK |
1988 - 1995 |
Stability of embossed PEI-(PSS-PDADMAC)(20) multilayer films versus storage time and versus a change in ionic strength Ladhari N, Hemmerle J, Haikel Y, Voegel JC, Schaaf P, Ball V |
1996 - 1999 |
Effect of silver ions on the structure of ZnO and photocatalytic performance of Ag/ZnO composites Xu J, Chang YG, Zhang YY, Ma SY, Qu Y, Xu CT |
2000 - 2005 |
Effective biaxial modulus and strain energy density of ideally (h k l)-fiber-textured hexagonal, tetragonal and orthorhombic films Wu HP, Wu LZ, Wang B, Yu HJ, Du SY |
2006 - 2011 |
Influences of annealing temperature on the optical properties of SiOx thin film prepared by reactive magnetron sputtering Huang F, Song QM, Li M, Xie B, Wang HQ, Jiang YS, Song YZ |
2012 - 2019 |
Morphological and textural characterization of vanadium oxide supported on zirconia by ionic exchange Gazzoli D, De Rossi S, Ferraris G, Valigi M, Ferrari L, Selci S |
2020 - 2025 |
Attapulgite-Fe3O4 magnetic nanoparticles via co-precipitation technique Liu YS, Liu P, Su ZX, Li FS, Wen FS |
2026 - 2029 |
Codoped (AlN) and monodoped (Al) ZnO thin films grown by RF sputtering: A comparative study Bhuvana KP, Elanchezhiyan J, Gopalakrishnan N, Balasubramanian T |
2030 - 2039 |
Collagen fibrils in UV irradiated poly(vinyl pyrrolidone) films Sionkowska A, Kozlowska J, Planecka A, Skopinska-Wisniewska J |
2040 - 2045 |
Selective growth of zigzagged and straight GaN nanowires by sublimation sandwich method and their photoluminescence property Lei M, Song B, Guo X, Tang WH |
2046 - 2051 |
Preparation of bioactive amorphous-like titanium oxide layer on titanium by plasma oxidation treatment Ou KL, Shih YH, Huang CF, Chen CC, Liu CM |
2052 - 2056 |
Strong room-temperature ultraviolet emission from nanocrystalline ZnO and ZnO: Ag films grown by ultrasonic spray pyrolysis Liu KP, Yang BF, Yan HW, Fu ZP, Wen MW, Chen YJ, Zuo J |
2057 - 2062 |
Dependence of N-2 pressure on the crystal structure and surface quality of AlN thin films deposited via pulsed laser deposition technique at room temperature Shukla G, Khare A |
2063 - 2068 |
Formation of periodic nanostructure network through substrate-mediated assembly Prabhakaran K, Kurian J, Kumar KNP, Chabal YJ |
2069 - 2074 |
Fabrication of internal diffraction gratings in planar fluoride glass using low-density plasma formation induced by a femtosecond laser Cho SH, Chang WS, Kim JG, Kim KR, Hong JW |
2075 - 2079 |
Ion beam induced mixing of co-sputtered Au-Ni films analyzed by Rutherford backscattering spectrometry Datta D, Bhattacharyya SR |
2080 - 2086 |
Probing the role of surface treated montmorillonite on the properties of semi-aromatic polyamide/clay nanocomposites Zulfiqar S, Kausar A, Rizwan M, Sarwar MI |
2087 - 2090 |
Improvement of carbon nanotube field emission properties by ultrasonic nanowelding Zhao B, Yadian BL, Chen D, Xu D, Zhang YF |
2091 - 2097 |
Polyaniline-coated halloysite nanotubes via in-situ chemical polymerization Zhang L, Wang T, Liu P |
2098 - 2103 |
Microstructure and corrosion resistance of phytic acid conversion coatings for magnesium alloy Cui XF, Li QF, Li Y, Wang FH, Jin G, Ding MH |
2104 - 2108 |
A transmission electron microscopy study on the crystal structure and atomic arrangement of Al-Nd thin films deposited on glass substrates Park YJ, Kim HN, Shin HH |
2109 - 2112 |
Effect of clay on the surface morphology and field emission properties of screen-printed activated carbon Lisunova MO, Lisunova YO, Lee S, Kim J, Kim Y, Joo K, Moon H, Zang D |
2113 - 2117 |
Low-temperature hydrothermal formation of a net-like structured TiO2 film and its performance of photogenerated cathode protection Yun H, Lin CJ, Li J, Wang JR, Chen HB |
2118 - 2124 |
Growth and characterization of the ZnO/ZnS bilayer obtained by chemical spray pyrolysis Lopez MC, Espinos JP, Leinen D, Martin F, Centeno SP, Romero R, Ramos-Barrado JR |
2125 - 2128 |
Surface treatment of CoFe2O4 nanoparticles to improve their dispersibility in aqueous phase with new fluorine-contain polymers Tang ZB, Liu P, Guo JS, Su ZX, Yang C |
2129 - 2132 |
Ba0.5Sr0.5TiO3/Bi1.5Zn1.0Nb1.5TiO7 multilayer thin films prepared by sol-gel method Yan X, Ren W, Shi P, Wu XQ, Chen XF, Yao X |
2133 - 2138 |
Effect of substrate temperature on the structural properties of magnetron sputtered titanium nitride thin films with brush plated nickel interlayer on mild steel Subramanian B, Ashok K, Jayachandran M |
2139 - 2142 |
Modifying the properties of fluorinated amorphous films using argon by filtered cathodic vacuum arc Lin YH, Syue YC, Lin HD, Chen US, Chang YS, Chen JR, Shih HC |
2143 - 2148 |
Formation of ZnTe by stacked elemental layer method Bhahada KC, Tripathi B, Acharya NK, Kulriya PK, Vijay YK |
2149 - 2152 |
Analysis of ITO/Mg:GaN interfaces by synchrotron radiation hard X-ray photoemission spectroscopy and their electrical characteristics Toyoshima Y, Horiba K, Oshima M, Ohta J, Fujioka H, Miki H, Ueda S, Yamashita Y, Yoshikawa H, Kobayashi K |
2153 - 2158 |
A systematic study of chemical vapor deposition growth of InN Cai XM, Ye F, Jing SY, Zhang DP, Fan P, Xie EQ |
2159 - 2161 |
Fabrication of nanoparticle micro-arrays patterned using direct write laser photoreduction Lau D, Furman S |
2162 - 2166 |
Reinforcement of hydrogenated carboxylated nitrile-butadiene rubber by multi-walled carbon nanotubes Lu L, Zhai YH, Zhang Y, Ong C, Guo SR |
2167 - 2172 |
A silicon-doped TiO2 nanotube arrays electrode with enhanced photoelectrocatalytic activity Su Y, Chen SO, Quan X, Zhao HM, Zhang YB |
2173 - 2175 |
Fabrication of As-doped p-type ZnO thin films using As2O3 as doping source material by E-beam evaporation Kumar M, Choi SY |
2176 - 2179 |
Effects of Yb3+ on the corrosion resistance and deposition rate of electroless Ni-P deposits Yan M, Ying HG, Ma TY, Luo W |
2180 - 2184 |
Formation of SiC using low energy CO2 ion implantation in silicon Sari AH, Ghorbani S, Dorranian D, Azadfar P, Hojabri AR, Ghoranneviss M |
2185 - 2191 |
A new approach to the surface modification of polymeric gate insulators for organic thin-film transistor applications Ahn T, Choi Y, Yi MH |
2192 - 2195 |
Structure and optical properties of Nb2O5 sculptured thin films by glancing angle deposition Xiao XD, Dong GP, Xu C, He HB, Qi HJ, Fan ZX, Shao JD |
2196 - 2199 |
Ion surface modification for space TWT multistage depressed collectors Ding MQ, Huang MG, Feng JJ, Bai GD, Yan TC |
2200 - 2204 |
Effects of an external magnetic field in pulsed laser deposition Garcia T, de Posada E, Villagran M, Ll JLS, Bartolo-Perez P, Pena JL |
2205 - 2213 |
Synthesis and characterization of TiO2 and Fe/TiO2 nanoparticles and their performance for photocatalytic degradation of 1,2-dichloroethane Hung WC, Chen YC, Chu H, Tseng TK |
2214 - 2218 |
Composition and structure of a-C:Au nanocomposites obtained by physical vapour deposition Calliari L, Speranza G, Minati L, Micheli V, Baranov A, Fanchenko S |
2219 - 2224 |
Fabrication of glass/Ni-Fe-P ternary alloy core/shell composite hollow microspheres through a modified electroless plating process An ZG, Zhang JJ, Pan SL |
2225 - 2229 |
Preparation, characteristics and electrochemical properties of surface-modified LiMn2O4 by doped LiNi0.05Mn1.95O4 Yuan YF, Wu HM, Guo SY, Wu JB, Yang JL, Wang XL, Tu JP |
2230 - 2236 |
Plasma plume induced during ArF laser ablation of hydroxyapatite Jedynski M, Hoffman J, Mroz W, Szymanski Z |
2237 - 2243 |
The effect of polymer matrix on laser microfabrication of Au nanoparticles dispersed polymer resists Yagyu H, Tabata O |
2244 - 2250 |
Synthesis and characterization of polyurethane/CdS-SiO2 nanocomposites via ultrasonic process Chen J, Zhou YM, Nan QL, Ye XY, Sun YQ, Wang ZQ, Zhang SM |
2251 - 2255 |
Controlled synthesis of diamond and carbon nanotubes on Ni-base alloy Li YS, Hirose A |
2256 - 2258 |
Preparation of porous TiO2/Ti composite membrane for immunoisolation Zhan MJ, Li G, Wei Q, Cui HL, Lin L |
2259 - 2264 |
Investigation of NO dissociation and reduction by H-2 on nanosized W2N surface with transient-response techniques Yao ZW, Dong HT |
2265 - 2269 |
Focused ion beam imaging of laser ablation sub-surface effects on layered materials Tellez H, Vadillo JM, Chater RJ, Laserna JJ, McPhail DS |
2270 - 2275 |
UV-vis-DR study of VOx/SiO2 catalysts prepared by sol-gel method Moussa N, Ghorbel A |
2276 - 2283 |
Microtribological properties of molecularly thin carboxylic acid functionalized imidazolium ionic liquid film on single-crystal silicon Mo YF, Yu B, Zhao WJ, Bai MW |
2284 - 2289 |
High throughput diffractive multi-beam femtosecond laser processing using a spatial light modulator Kuang Z, Perrie W, Leach J, Sharp M, Edwardson SP, Padgett M, Dearden G, Watkins KG |
2290 - 2294 |
Mechanism of the etching rate change of aluminosilicate glass in HF acid with micro-indentation Saito Y, Okamoto S, Inomata H, Kurachi J |
2295 - 2302 |
Preparation of polystyrene brush film by radical chain-transfer polymerization and micromechanical properties Zhao J, Chen M, An YQ, Liu JX, Yan FY |
2303 - 2311 |
Effect of two typical focus positions on microstructure shape and morphology in femtosecond laser multi-pulse ablation of metals Wang WJ, Mei XS, Jiang GD, Lei ST, Yang CJ |
2312 - 2315 |
Hydrostatic pressure effects on the impurity states in InAs/GaAs coupled quantum dots Xia CX, Liu YM, Wei SY |
2316 - 2321 |
Observation of silane coupling agents adsorbed on silica by solid state H-1 NMR under fast magic angle spinning Han JL, Zuo CW, Gu Q, Li DW, Wang XL, Xue G |
2322 - 2328 |
An organic chromium-free conversion coating on AZ91D magnesium alloy Chen XM, Li GY, Lian JS, Jiang Q |
2329 - 2332 |
Semi-circular shaped ZnO nanowhiskers assemblies deposited using an aqueous solution Hu XL, Masuda Y, Ohji T, Kato K |
2333 - 2337 |
Surface topography and morphology characterization of PIII irradiated silicon surface Sharma SK, Barthwal S |
2338 - 2341 |
Lanthanum-based conversion coating on Mg-8Li alloy Yang LH, Li JQ, Yu X, Zhang ML, Huang XM |
2342 - 2346 |
Heterointerfaces of stable and metastable ZnO phases Ashrafi A |
2347 - 2352 |
Effects of low-temperature surface-wave plasma treatment with various gases on surface modification of chitosan Ogino A, Kral M, Yamashita M, Nagatsu M |
2353 - 2359 |
Structural, optical and electrical properties of F-doped ZnO nanorod semiconductor thin films deposited by sol-gel process Ilican S, Caglar Y, Caglar M, Yakuphanoglu F |
2360 - 2364 |
Surface-phase separation of PEO-containing biodegradable PLLA blends and block copolymers Lee JW, Jeong ED, Cho EJ, Gardella JA, Hicks W, Hard R, Bright FV |
2365 - 2369 |
Synthesis of Bi2O3-TiO2 composite film with high-photocatalytic activity under sunlight irradiation Xu JJ, Ao YH, Fu DG, Yuan CW |
2370 - 2374 |
Microstructure and properties of nanocrystalline titanium monoxide films synthesized by inductively coupled plasma assisted reactive direct current magnetron sputtering Li ZG, Miyake S, Makino M, Wu YX |
2375 - 2381 |
Effect of temperature on the kinetics of acetylene decomposition over reduced iron oxide catalyst for the production of carbon nanotubes Khedr MH, Halim KSA, Soliman NK |
2382 - 2387 |
Growth and characterization of ZnO nanostructured thin films by a two step chemical method Kumar PS, Raj AD, Mangalaraj D, Nataraj D |
2388 - 2399 |
XPS and ToF-SIMS analysis of natural rubies and sapphires heat-treated in a reducing (5 mol% H-2/Ar) atmosphere Achiwawanich S, James BD, Liesegang J |
2400 - 2403 |
The elastic relaxation energy and equilibrium aspect ratio of self-organized pyramidal quantum dot Zhou WM, Cai CY, Yin SY, Wang CY |
2404 - 2407 |
Influence of evaporation conditions for BCP and Alq(3) on the performance of the PVK:Ir(ppy)(3) emitting system Li YR, Zhao SL, Zhang FJ, Xu Z, Song DD |
2408 - 2413 |
Preparation of flame sprayed poly(tetrafluoroethylene-co-hexafluoropropylene) coatings and their tribological properties under water lubrication Feng ZZ, Xu HY, Yan FY |
2414 - 2418 |
Effect of oxygen partial pressure on structural, optical and electrical properties of titanium-doped CdO thin films Gupta RK, Ghosh K, Patel R, Kahol PK |
2419 - 2424 |
Silica coating of CeO2 nanoparticles by a fast microwave irradiation method Siddiquey IA, Furusawa T, Hoshi Y, Ukaji E, Kurayama F, Sato M, Suzuki N |
2425 - 2432 |
Surface modification of ceramic matrix composites induced by laser treatment Costil S, Lukat S, Langlade C, Coddet C |
2433 - 2441 |
Quantum chemical studies on the inhibition of corrosion of copper surface by substituted uracils Issa RM, Awad MK, Atlam FM |
2442 - 2448 |
Accelerating calcium phosphate growth on NaOH-treated poly-(lactic-co-glycolic acid) by evaporation-induced surface crystallization Duan K, Tang A, Wang RZ |
2449 - 2455 |
Young's modulus of silicon nanoplates at finite temperature Wang J, Huang QA, Yu H |
2456 - 2460 |
Immobilization of TiO2 nanofibers on titanium plates for implant applications Lim JI, Yu B, Woo KM, Lee YK |
2461 - 2465 |
High energy ions and energetic plasma irradiation effects on aluminum in a Filippov-type plasma focus Roshan MV, Rawat RS, Babazadeh AR, Emami M, Kiai SMS, Verma R, Lin JJ, Talebitaher AR, Lee P, Springham SV |
2466 - 2473 |
Surface morphological, mechanical and thermal characterization of electron beam irradiated fibers Choi HY, Han SO, Lee JS |
2474 - 2477 |
Controlled variation of the information depth by angle dependent soft X-ray emission spectroscopy: A study on polycrystalline Cu(In,Ga)Se-2 Monig H, Lauermann I, Grimm A, Camus C, Kaufmann CA, Pistor P, Jung C, Kropp T, Lux-Steiner MC, Fischer CH |
2478 - 2484 |
Preparation, characterization and activity evaluation of p-n junction photocatalyst p-ZnO/n-TiO2 Chen SF, Zhao W, Liu W, Zhang SJ |
2485 - 2489 |
H2SO4/HNO3/HCl-Functionalization and its effect on dispersion of carbon nanotubes in aqueous media Osorio AG, Silveira ICL, Bueno VL, Bergmann CP |
2490 - 2493 |
Sputter damage in Si (001) surface by combination of C-60(+) and Ar+ ion beams Yu BY, Lin WC, Chen YY, Lin YC, Wong KT, Shyue JJ |
2494 - 2499 |
Preparation of TiO2-doped ZnO films by radio frequency magnetron sputtering in ambient hydrogen-argon gas Chung JL, Chen JC, Tseng CJ |
2500 - 2503 |
Effects of substrate on morphologies and photoluminescence properties of ZnO nanorods Yang JH, Lang JH, Li CS, Yang LL, Han Q, Zhang YJ, Wang DD, Gao M, Liu XY |
2504 - 2511 |
Evaluation of surface roughness of a plasma treated polymeric membrane by wavelet analysis and quantification of its enhanced performance Pal S, Ghatak SK, De S, DasGupta S |
2512 - 2516 |
Ge nanocrystal charge trapping devices fabricated by one-step oxidation on poly-SiGe Kao CH, Lai CS, Huang CS, Fan KM |
2517 - 2523 |
On the formation of lithium oxides and carbonates on Li metal electrodes in comparison to LiCoO2 surface phases investigated by photoelectron spectroscopy Ensling D, Thissen A, Jaegermann W |
2524 - 2526 |
Effect of bias voltage polarity on hydrogen sensing with AlGaN/GaN Schottky diodes Anderson TJ, Wang HT, Kang BS, Ren F, Pearton SJ, Osinsky A, Dabiran A, Chow PP |
2527 - 2532 |
Effect of thickness on structural, electrical, optical and magnetic properties of Co and Al doped ZnO films deposited by sol-gel route Sharma M, Mehra RM |
2533 - 2537 |
The adsorption of Be on the surface of (0001) InN Wang JL, Wu XS, Dong JM, Bai DM, Dai XQ |
2538 - 2544 |
Cold spraying of Fe/Al powder mixture: Coating characteristics and influence of heat treatment on the phase structure Wang HT, Li CJ, Yang GJ, Li CX |
2545 - 2549 |
Study of ferromagnetic, transparent and conductive AZO/Fe/AZO composite films Wang LS, Chen YZ, Yue GH, She HD, Luo XH, Peng DL |
2551 - 2556 |
Comparative surface and nano-tribological characteristics of nanocomposite diamond-like carbon thin films doped by silver Zhang HS, Endrino JL, Anders A |
2557 - 2560 |
Investigation of local order of a-SiN:H films deposited by hot wire chemical vapour deposition (HWCVD) Swain BP, Swain BS, Hwang NM |
2561 - 2568 |
Microscopic studies of spherical particles for nuclear safeguards Donohue D, Ciurapinski A, Cliff J, Rudenauer F, Kuno T, Poths J |
2569 - 2573 |
XPS analysis of laser transmission micro-joint between poly (vinylidene fluoride) and titanium Sultana T, Georgiev GL, Auner G, Newaz G, Herfurth HJ, Patwa R |
2574 - 2580 |
Experimental study on the bandgap narrowings of TiO2 films calcined under N-2 or NH3 atmosphere Mi L, Xu P, Wang PN |
2581 - 2590 |
Comparative study on oxidation behavior of selected MCrAlY coatings by elemental concentration profile analysis Seo D, Ogawa K, Suzuki Y, Ichimura K, Shoji T, Murata S |
2591 - 2595 |
The role of surface properties of activated carbon in the catalytic reduction of NO by carbon Xue YY, Guo Y, Zhang ZG, Guo YL, Wang YQ, Lu GZ |
2596 - 2602 |
Characterization of rough interfaces obtained by boriding Campos-Silva I, Balankin AS, Sierra AH, Lopez-Perrusquia N, Escobar-Galindo R, Morales-Matamoros D |
2603 - 2607 |
Chemically deposited nanocrystalline NiO thin films for supercapacitor application Patil UM, Salunkhe RR, Gurav KV, Lokhande CD |
2608 - 2612 |
Pd-catalyzed coupling reaction on the organic monolayer: Sonogashira reaction on the silicon (111) surfaces Qua MN, Zhang Y, He JM, Cao XP, Zhang JY |
2613 - 2618 |
Influence of surface properties of ceramic particles on their incorporation into cobalt electroless deposits Rudnik E |
2619 - 2622 |
An application of Au thin-film emissivity barrier on Ni alloy Huang ZB, Zhu DM, Lou F, Zhou WC |
2623 - 2626 |
The electronic properties and electron affinity of the hydrogenated nanodiamonds with surface reconstructions Zhang ZK, Dai Y, Huang BB |
2627 - 2631 |
The effects of post-treatments on the photovoltaic properties of spray-deposited SnO2:F thin films Ikhmayies SJ, Ahmad-Bitar RN |
2632 - 2640 |
Ti-MCM-41 supported phosphotungstic acid: An effective and environmentally benign catalyst for epoxidation of styrene Wang GJ, Liu GQ, Xu MX, Yang ZX, Liu ZW, Liu YW, Chen SF, Wang L |
2641 - 2645 |
A novel preparation method of Sn-modified Pt nanoparticles and application for methanol oxidation Du YL, Su BQ, Zhang N, Wang CM |
2646 - 2650 |
Low-temperature growth and optical properties of Ce-doped ZnO nanorods Yang JH, Gao M, Yang LL, Zhang YJ, Lang JH, Wang DD, Wang YX, Liu HL, Fan HG |
2651 - 2654 |
Growth and electrical properties of Ce-doped Bi2Ti2O7 thin films by chemical solution deposition Jing XY, Huang BB, Yang XN, Wei JY, Wang ZY, Wang P, Zheng LR, Xu ZH, Liu HX, Wang XN |
2655 - 2659 |
Optical characterization of hydrogen-free CeO2 doped DLC films deposited by unbalanced magnetron sputtering Zhang ZY, Zhou HX, Guo DM, Gao H, Kang RK |
2660 - 2664 |
Promoting strain relaxation of Si0.72Ge0.28 film on Si (100) substrate by inserting a low-temperature Ge islands layer in UHVCVD Zhou ZW, Cai ZM, Li C, Lai HK, Chen SY, Yu JZ |
2665 - 2670 |
Preparation and characterization of CdO thin films obtained by thermal oxidation of evaporated Cd thin films Dantus C, Rusu GG, Dobromir M, Rusu M |
2671 - 2674 |
Fabrication of surface self-lubricating composites of aluminum alloy Zhang WJ, Zhang D, Le YK, Li L, Ou B |
2675 - 2681 |
Interaction of femtosecond laser pulses with tempera paints Gaspard S, Oujja M, Moreno P, Mendez C, Garcia A, Domingo C, Castillejo M |
2682 - 2687 |
Growth of TiO2 nanorods by chemical bath deposition method More AM, Gujar TP, Gunjakar JL, Lokhande CD, Joo OS |
2688 - 2696 |
The effect of second-phase on the corrosion and wear behaviors of composite alloying layer Xu J, Zhuo CZ, Tao J, Jiang SY |
2697 - 2703 |
Microstructure and tribological properties of in situ synthesized TiC, TiN, and SiC reinforced Ti3Al intermetallic matrix composite coatings on pure Ti by laser cladding Pu YP, Guo BG, Zhou JS, Zhang ST, Zhou HD, Chen JM |
2704 - 2709 |
Size effects in liquid-phase photo-oxidation of phenol using nanometer-sized TiO2 catalysts Liu S, Jaffrezic N, Guillard C |
2710 - 2714 |
Orientation dependence of electrical properties for Bi4-xNdxTi3O12 (x=0.85) thin film deposited on p-type Si(100) substrate Yi SW, Kim SS, Kim WJ, Do D |
2715 - 2722 |
Styrene-butadiene rubber/halloysite nanotubes nanocomposites modified by methacrylic acid Guo BC, Lei YD, Chen F, Liu XL, Du ML, Jia DM |
2723 - 2729 |
Fabrication of high concentration barium titanate/polyvinylpyrrolidone nano-composite thin films and their dielectric properties Kobayashi Y, Kosuge A, Konno M |
2730 - 2734 |
XPS study of the Cu@Cu2O core-shell nanoparticles Ghodselahi T, Vesaghi MA, Shafiekhani A, Baghizadeh A, Lameii M |
2735 - 2739 |
Space charge and electroluminescence characteristics of thermally aged LDPE films Yang K, Zhang GJ, Tu DM, Yan Z |
2740 - 2745 |
Properties of electroless Ni-P deposition of glass substrates using a mercapto organosilanes for functional groups to graft palladium Chi FT, Jiang K, Li B, Jiang B |
2746 - 2751 |
A variable density model for the interpretation of ARXPS data Paynter RW, Chanbi Z |
2752 - 2758 |
The surface change of TiO2 film induced by UV illumination and the effects on UV-vis transmission spectra Liu BS, Wen LP, Zhao XJ |
2759 - 2766 |
Surface defect (Ti3+) controlling in the first step on the anatase TiO2 nanocrystal by using sol-gel technique Suriye K, Jongsomjit B, Satayaprasert C, Praserthdam P |
2767 - 2772 |
Ion irradiation induced nano granular magnetic Fe5Si3 silicide phase formation in Fe/Si structures Tripathi JK, Srivastava PC |
2773 - 2776 |
Preparation of (100)-oriented LaNiO3 on Si for the textured Ba0.5Sr0.5TiO3 thin films Zhang CC, Shi JC, Yang CS, Ding GF |
2777 - 2781 |
Extended measurement of crater depths for aluminum and copper at high irradiances by nanosecond visible laser pulses Gojani AB, Yoh JJ, Yoo JH |
2782 - 2786 |
Effect of moisture content on solid-state interaction at the interface between magnesium stearate and captopril Cheng WT, Wang SL, Lin SY |
2787 - 2790 |
Field emission properties of nitrogen incorporated DLC films prepared by electrodeposition Li RS, Xie EQ, Zhou M, Zhang ZX, Wang T, Lu BA |
2791 - 2795 |
Effect of Bi addition on the optical behavior of a-Ge-Se-In-Bi thin films Sharma I, Tripathi SK, Barman PB |
2796 - 2802 |
Femtosecond laser surface texturing of a nickel-based superalloy Semaltianos NG, Perrie W, French P, Sharp M, Dearden G, Watkins KG |
2803 - 2807 |
A facile route for the preparation of morphology-controlled NaTaO3 films Zhou XF, Chen Y, Mei H, Hu ZL, Fan YQ |
2808 - 2812 |
Ag-metallization effects on optical and electrical properties of porous silicon Kayahan E, Ceylan N, Esmer K |
2813 - 2821 |
The diamond pyramid structure in electroless copper deposit, its atomic model and molecular dynamics simulation Wu X, Sha W |
2822 - 2824 |
Interfacial studies on the O-3 modified carbon fiber-reinforced polyamide 6 composites Li J |
2825 - 2829 |
Studies on spin coated PANI/PMMA composite thin film: Effect of post-deposition heating Yadav JB, Patil RB, Puri RK, Puri V |
2830 - 2839 |
Incorporation of zirconia into coatings formed by DC plasma electrolytic oxidation of aluminium in nanoparticle suspensions Matykina E, Arrabal R, Monfort F, Skeldon P, Thompson GE |
2840 - 2844 |
Influence of thermal cycling on structural, optical and electrical properties of vanadium oxide thin films Wu XC, Lai FC, Lin LM, Li YZ, Lin LH, Qu Y, Huang ZG |
2845 - 2850 |
Structural and luminescence characterization of porous anodic oxide films on aluminum formed in sulfamic acid solution Stojadinovic S, Vasilic R, Belca I, Tadic M, Kasalica B, Zekovic L |
2851 - 2858 |
Effect of addition of pore expanding agent on changes of structure characteristics of ordered mesoporous silicas Derylo-Marczewska A, Marczewski AW, Skrzypek I, Pikus S, Kozak M |
2859 - 2863 |
Zinc oxide thin film synthesized by combustion chemical vapor deposition Li ZY, Xu FC, Wu QH, Li J |
2864 - 2868 |
Plasma penetration depth and mechanical properties of atmospheric plasma-treated 3D aramid woven composites Chen X, Yao L, Xue J, Zhao D, Lan Y, Qian X, Wang CX, Qiu Y |
2869 - 2873 |
Adsorptive property of albumin and streptokinase on sputtered hydroxyapatite films and its antithrombogenicity Yoshihara H, Ozeki K, Masuzawa T, Aoki H |
2874 - 2878 |
Formation of mesoporous alumina via hydrolysis of modified aluminum isopropoxide in presence of CTAB cationic surfactant Khalil KMS |
2879 - 2884 |
Improving visible-light photocatalytic activity of N-doped TiO2 nanoparticles via sensitization by Zn porphyrin Chen DM, Yang D, Geng JQ, Zhu JH, Jiang ZY |
2885 - 2889 |
Characterization of anti-adhesive self-assembled monolayer for nanoimprint lithography Zhou WM, Zhang J, Liu YB, Li XL, Niu XM, Song ZT, Min GQ, Wan YZ, Shi LY, Feng SL |
2890 - 2895 |
Influence of ejection angle on residual stress and optical properties of sputtering Ta2O5 thin films Tien CL |
2896 - 2902 |
Functionalization of SU-8 photoresist surfaces with IgG proteins Blagoi G, Keller S, Johansson A, Boisen A, Dufva M |
2903 - 2909 |
Preferential oxidation properties of CO in excess hydrogen over CuO-CeO2 catalyst prepared by hydrothermal method Zhu PF, Li J, Zuo SF, Zhou RX |
2910 - 2915 |
Gas doping ratio effects on p-type hydrogenated nanocrystalline silicon thin films grown by hot-wire chemical vapor deposition Luo PQ, Zhou ZB, Chan KY, Tang DY, Cui RQ, Dou XM |
2916 - 2919 |
Au/p-diamond ohmic contacts deposited by RF sputtering Zhen CM, Wang XQ, Wu XC, Liu CX, Hou DL |
2920 - 2924 |
The surface properties of sepiolite Helmy AK, de Bussetti SG |
2925 - 2931 |
Growth and characterization of chromium oxide coatings prepared by pulsed-direct current reactive unbalanced magnetron sputtering Barshilia HC, Rajam KS |
2932 - 2941 |
Nano-phase titanium dioxide thin film deposited by repetitive plasma focus: Ion irradiation and annealing based phase transformation and agglomeration Rawat RS, Aggarwal V, Hassan M, Lee P, Springham SV, Tan TL, Lee S |
2942 - 2946 |
Preparation of bioactive porous HA/PCL composite scaffolds Zhao J, Guo LY, Yang XB, Weng J |
2947 - 2950 |
Bead structured nanocrystalline ZnO thin films: Synthesis and LPG sensing properties Mishra D, Srivastava A, Srivastava A, Shukla RK |
2951 - 2957 |
Low-energy hydrogen ion shower (LEHIS) treatment of polytetrafluoroethylene (PTFE) materials Salapare HS, Blantocas GQ, Noguera VR, Ramos HJ |
2958 - 2962 |
Synthesis of p-type Al-N codoped ZnO films using N2O as a reactive gas by RF magnetron sputtering Chou SM, Hon MH, Leu IC |
2963 - 2970 |
Covalent functionalization of multi-wall carbon nanotubes (MWNTs) by nickel(II) Schiff-base complex: Synthesis, characterization and liquid phase oxidation of phenol with hydrogen peroxide Salavati-Niasari M, Bazarganipour M |
2971 - 2977 |
Internal photoemission study on charge trapping behavior in rapid thermal oxides on strained-Si/SiGe heterolayers Bera MK, Mahata C, Bhattacharya S, Chakraborty AK, Armstrong BM, Gamble HS, Maiti CK |
2978 - 2984 |
Structure stability and corrosion inhibition of super-hydrophobic film on aluminum in seawater Yin YS, Liu T, Chen SG, Liu T, Cheng S |
2985 - 2988 |
An effect of As flux on GaAs/AlAs quantum wells: A combined photoluminescence and reflection high-energy electron diffraction study Pakarinen J, Polojarvi V, Laukkanen P, Tukiainen A, Laakso A, Peng CS, Tuomisto P, Korpijarvi VM, Puustinen J, Pessa M |
2989 - 2993 |
Effect of chemical treatment to hollow carbon nanoparticles (HCNP) on catalytic behaviors of the platinum catalysts Du JP, Song C, Zhao JH, Zhu ZP |
2994 - 2999 |
pH-dependent 2-amino-5-mercapto-1,3,4-thiadiazole monolayers at the silver surface: Surface enhanced Raman scattering spectroscopic and electrochemical observations Yang HF, Song W, Ji JH, Zhu X, Sun YP, Yang RY, Zhang ZR |
3000 - 3003 |
First nucleation steps of nickel nanoparticle growth on Al2O3 (0001) studied by XPS inelastic peak shape analysis Gallardo-Vega C, De La Cruz W, Tougaard S, Cota-Araiza L |
3004 - 3010 |
Surface structure and composition of Ni-Ti alloys and their influence on the temperature-dependent segregation behavior Bozzolo G, Mosca HO, del Grosso MF |
3011 - 3015 |
Hydride formation on titanium surfaces by cathodic polarization Videm K, Lamolle S, Monjo M, Ellingsen JE, Lyngstadaas SP, Haugen HJ |
3016 - 3018 |
Nanostructured surface morphology of ZnO grown on p-type GaN and Si by metal organic chemical vapor deposition Hung SC, Huang PJ, Chan CE, Uen WY, Ren F, Pearton SJ, Yang TN, Chiang CC, Lan SM, Chi GC |
3019 - 3027 |
Effect of mixed Catalysts system on TEOS-based silica aerogels dried at ambient pressure Gurav JL, Nadargi DY, Rao AV |
3028 - 3032 |
Polarization-dependent single-beam laser-induced grating-like effects on titanium films Camacho-Lopez S, Evans R, Escobar-Alarcon L, Camacho-Lopez MA, Camacho-Lopez MA |
3033 - 3039 |
Carbon monoxide gas-sensing properties of CeO2-ZnO thin films Al-Kuhaili MF, Durrani SMA, Bakhtiari IA |
3040 - 3045 |
Tribological properties of self-assembled monolayers covalently bonded to Si Nakano M, Ishida T, Sano H, Sugimura H, Miyake K, Ando Y, Sasaki S |
3046 - 3048 |
Effect of thickness on optoelectrical properties of Mo-doped indium oxide films Gupta RK, Ghosh K, Patel R, Kahol PK |
3049 - 3055 |
The thermal stability of porous alumina/stainless steel catalyst support obtained by spray pyrolysis Novakovic T, Radic N, Grbic B, Dondur V, Mitric M, Randjelovic D, Stoychev D, Stefanov P |
3056 - 3062 |
Nanostructured bioglass thin films synthesized by pulsed laser deposition: CSLM, FTIR investigations and in vitro biotests Floroian L, Savu B, Stanciu G, Popescu AC, Sima F, Mihailescu IN, Mustata R, Sima LE, Petrescu M, Tanaskovic D, Janackovic D |
3063 - 3070 |
Inferring fractal dimension of rough/porous surfaces-A comparison of SEM image analysis and electrochemical impedance spectroscopy methods Risovic D, Poljacek SM, Furic K, Gojo M |
3071 - 3078 |
Variation of microindentation hardness with solidification and microstructure parameters in the Al based alloys Kaya H, Cadirli E, Boyuk U, Marasli N |
3079 - 3084 |
On the argon and oxygen incorporation into SiOx through ion implantation during reactive plasma magnetron sputter deposition van Hattum ED, Boltje DB, Palmero A, Arnoldbik WM, Rudolph H, Habraken FHPM |
3085 - 3089 |
Improved free-standing GaN Schottky diode characteristics using chemical mechanical polishing Arjunan AC, Singh D, Wang HT, Ren F, Kumar P, Singh RK, Pearton SJ |
3090 - 3096 |
Novel ceria-polymer microcomposites for chemical mechanical polishing Coutinho CA, Mudhivarthi SR, Kumar A, Gupta VK |
3097 - 3103 |
Hybrid atomistic-macroscale modeling of long-time phase change in nanosecond laser-material interaction Zhang LJ, Wang XW |
3104 - 3111 |
High temperature oxidation and corrosion in marine environments of thermal spray deposited coatings Chaliampalias D, Vourlias G, Pavlidou E, Stergioudis G, Skolianos S, Chrissafis K |
3112 - 3116 |
Fabrication of superhydrophobic ZnO/Zn surface with nanowires and nanobelts structures using novel plasma assisted thermal vapor deposition Li G, Wang B, Liu Y, Tan T, Song X, Yan H |
3117 - 3120 |
Selective oxidation of cyclopentene to glutaraldehyde over the WO3/SiO2 catalyst Lu G, Li XY, Qu ZP, Wang YX, Chen GH |
3121 - 3125 |
Interface metallization and electrical characterization of Ta-Pt multilayers on n-type SiC Yang H, Peng TH, Wang WJ, Wang WY, Chen XL |
3126 - 3131 |
Micro-architecture of nonlinear optical Ba2TiGe2O8 crystal dots and lines on the surface of laser-induced crystallized glasses by chemical etching Honma T, Hirokawa N, Komatsu T |
3132 - 3136 |
Damage channeling in femtosecond laser micro-structured SBN crystals Rodenas A, Lamela J, Jaque F, Jaque D, Torchia G, Mendez C, de Aldana JRV, Roso L |
3137 - 3140 |
Preparation of porous titania thin film and its photocatalytic activity Ao YH, Xu JJ, Fu DG, Yuan CW |
3141 - 3148 |
Roles of oxygen vacancy in the adsorption properties of CO and NO on Cu2O(111) surface: Results of a first-principles study Sun BZ, Chen WK, Zheng JD, Lu CH |
3149 - 3152 |
Growth temperature dependences of InN films grown by MOCVD Yang CB, Wang XL, Xiao HL, Zhang XB, Hua GX, Ran JX, Wang CM, Li JP, Li JM, Wang ZG |
3153 - 3158 |
Effects of oxygen plasma treatment power on surface properties of poly(p-phenylene benzobisoxazole) fibers Chen P, Zhang CS, Zhang XY, Wang BC, Li W, Lei QQ |
3159 - 3163 |
Electroforming of continuous Al-AlN granular films Liang HF, Meng LG, Liu CL |
3164 - 3169 |
Study of hydrogen adsorption on the Ti (0001)-(1 x 1) surface by density functional theory Guo JX, Guan L, Wang SB, Zhao QX, Wang YL, Liu BT |
3170 - 3174 |
Microstructure and electrical properties of the conductive Pt-LaNiO3 composite films deposited with co-sputtering Qiao L, Bi XF |
3175 - 3178 |
Structural, electrical and optical properties of Al-Ti codoped ZnO (ZATO) thin films prepared by RF magnetron sputtering Jiang MH, Liu XY |
3179 - 3183 |
Evaluation of femtosecond laser pulse irradiation of ancient parchment Walczak M, Oujja M, Crespo-Arca L, Garcia A, Mendez C, Moreno P, Domingo C, Castillejo M |
3184 - 3187 |
Adsorption of iodide and iodate on colloidal silver surface Zhang AP, Tie XY, Zhang JZ, An YW, Li LJ |
3188 - 3194 |
Pulsed laser synthesis of ceramic-metal composite coating on steel Du B, Samant AN, Paital SR, Dahotre NB |
3195 - 3200 |
Effect of the thickness and hydrogen treatment on the properties of Ga-doped ZnO transparent conductive films Lee MJ, Lim J, Bang J, Lee W, Myoung JM |
3201 - 3204 |
Synthesis and photoluminescence property of indium oxide nanowires Wu P, Li Q, Zhao CX, Zhang DL, Chi LF, Xiao T |
3205 - 3209 |
Effect of yttrium and chromium ion implantation on crevice electrochemical behavior of carbon steel in sodium chloride solution Liang CH, Huang NB |
3210 - 3216 |
Direct micro-patterning of aluminum substrates via laser interference metallurgy D'Alessandria M, Lasagni A, Mucklich F |
3217 - 3229 |
Effects of atmospheric plasma activation on surface properties of pigment-coated and surface-sized papers Pykonen M, Sundqvist H, Jarnstrom J, Kaukoniemi OV, Tuominen M, Lahti J, Peltonen J, Fardim P, Toivakka M |
3230 - 3234 |
Effect of TiO2 buffer layer on the structural and optical properties of ZnO thin films deposited by E-beam evaporation and sol-gel method Xu LH, Shi LX, Li XY |
3235 - 3239 |
Survival of the excited Mg atoms sputtered from Mg, MgO, MgF2 and oxygen-covered Mg surface Dogar AH, Ullah S, Hussain S, Qayyum A |
3240 - 3250 |
Multiscale simulation of nanoindentation on Ni (100) thin film Wang CT, Jian SR, Jang JSC, Lai YS, Yang PF |
3251 - 3256 |
Microstructure and mechanical characteristics of laser coating-texturing alloying dimples Wan DP, Chen BK, Shao YM, Wang SL, Hu DJ |
3257 - 3262 |
Field emission characteristics of nano-structured carbon films deposited on differently pretreated Mo films Wang LY, Wang XP, Wang LJ, Zhang L |
3263 - 3266 |
Influence of surface treatment on preparing nanosized TiO2 supported on carbon nanotubes Wang S, Ji LJ, Wu B, Gong QM, Zhu YF, Liang J |
3267 - 3275 |
Online study of cracks during laser cladding process based on acoustic emission technique and finite element analysis Wang FJ, Mao HD, Zhang DW, Zhao XY, Shen Y |
3276 - 3282 |
Assembly of octadecyl phosphonic acid on the alpha-Al2O3 (0001) surface of air annealed alumina: Evidence for termination dependent adsorption Liakos IL, McAlpine E, Chen XY, Newman R, Alexander MR |
3283 - 3288 |
Atomic force microscopy study of fullerene-based colloids Todorovic-Markovic B, Jovanovic S, Jokanovic V, Nedic Z, Dramicanin M, Markovic Z |
3289 - 3293 |
Enhancement of optical second harmonic generation by nitrogen adsorption on Cu(001) Sano H, Miyaoka M, Iimori T, Sakiba D, Nakatsuji K, Wolf W, Podloucky R, Kawamura N, Mizutani G, Komori F |
3294 - 3299 |
An efficient route to functionalize singe-walled carbon nanotubes using alcohols Tian R, Wang XB, Li MJ, Hu HT, Chen R, Liu FM, Zheng H, Wan L |
3300 - 3309 |
Hydrodechlorination of chlorobenzene over NiB/SiO2 and NiP/SiO2 amorphous catalysts after being partially crystallized: A consideration of electronic and geometrical factors Chen JX, Ci DH, Wang RJ, Zhang JY |
3310 - 3317 |
Adsorption of methane with the presence of water on oxide, polymer and carbon adsorbents studied using H-1 NMR spectroscopy at low temperatures Turov VV, Turova AA, Goncharuk EV, Gun'ko VM |
3318 - 3321 |
Oxidation of hydrogen terminated Ge(100) surface in the presence of iodine in methanol Lee Y, Park K, Lim S |
3322 - 3327 |
Depth-sensitive characterization of surface magnetic properties of as-quenched FeNbB ribbons Zivotsky O, Postava K, Hrabovska K, Hendrych A, Pistora J, Kraus L |
3328 - 3331 |
The impurity Franz-Keldysh effect in 2D photonic macroporous silicon structures Karachevtseva LA, Ivanov VI, Lytvynenko OO, Parshin KA, Stronska OJ |
3332 - 3335 |
Metal organic chemical vapor deposition growth of Cd1-xFexSe thin films Ju ZG, Lu YM, Zhang JY, Shan CX, Zhao DX, Zhang ZZ, Li BH, Yao B, Shen DZ |
3336 - 3341 |
Spreading dynamics of functional droplets Li X, Hu YZ, Jiang L |
3342 - 3349 |
Multi-length scale Monte Carlo simulation of the growth process of SiC film by chemical vapor deposition Liu CX, Yang YQ, Luo X, Zhang RJ, Huang B |
3350 - 3353 |
High Al-content AlInGaN epilayers with different thicknesses grown on GaN/sapphire templates Shang JZ, Zhang BP, Wu CM, Cai LE, Zhang JY, Yu JZ, Wang QM |
3354 - 3360 |
Fractal dimension and energetic heterogeneity of gold-modified Al-Fe-Ce pilc's Carriazo JG, Molina R, Moreno S |
3361 - 3370 |
Chemical modification of silica-gel with hydroxyl- or amino-terminated polyamine for adsorption of Au(III) Qu RJ, Wang MG, Sun CM, Zhang Y, Ji CA, Chen H, Meng YF, Yin P |
3371 - 3374 |
Superhydrophobic or superhydrophilic surfaces regulated by micro-nano structured ZnO powders Zhou XF, Guo XF, Ding WP, Chen Y |
3375 - 3380 |
Study of the effect of plasma power on ZnO thin films growth using electron cyclotron resonance plasma-assisted molecular-beam epitaxy Yang Z, Lim JH, Chu S, Zuo Z, Liu JL |
3381 - 3387 |
Langmuir films of nitro substituted N-benzylidene hexadecylamine Schiff bases at air/water interface-Phase transitions and molecular dynamics simulation Lakshmanan M, Raman SS, Dhathathreyan A |
3388 - 3393 |
Synthesis and high catalytic properties of mesoporous Pt nanowire array by novel conjunct template method Zhong Y, Xu CL, Kong LB, Li HL |
3394 - 3399 |
Influence of H13 steel unit on wear behavior of vermicular cast iron Zhou H, Guo QC, Lin PY, Wei-Zhang, Zhang XL, Ren LQ |
3400 - 3406 |
Fabrication of poly(methyl methacrylate) colloidal monolayer on chemically modified silicon surface and hemispherical platinum nanoshell Nam HJ, Kwon YU, Jung DY |
3407 - 3413 |
Sub-micron parallel laser direct-write Othon CM, Laracuente A, Ladouceur HD, Ringeisen BR |
3414 - 3420 |
Rolling and slipping motion of a water droplet sandwiched between two parallel plates coated with fluoroalkylsilanes Suzuki S, Nakajima A, Sakai M, Hashimoto A, Yoshida N, Kameshima Y, Okada K |
3421 - 3425 |
Surface modification of PE film by DBD plasma in air Ren CS, Wang K, Nie QY, Wang DZ, Guo SH |
3426 - 3433 |
Structure, mechanical performance and electrochemical characterization of plasma sprayed SiO2/Ti-reinforced hydroxyapatite biomedical coatings Morks MF, Fahim NF, Kobayashi A |
3434 - 3441 |
First-principles molecular dynamics simulation of O-2 reduction on ZrO2 ((1)over-bar 1 1) surface Okamoto Y |
3442 - 3446 |
Numerical analysis of second harmonic intensity images of a H-Si(111) surface after UV light pulse irradiation Miyauchi Y, Sano H, Mizutani G |
3447 - 3453 |
Characterization and nanoindentation testing of thin ZrO2 films synthesized using layer-by-layer (LbL) deposited organic templates Zlotnikov I, Gotman I, Gutmanas EY |
3454 - 3458 |
Novel application of the electrodeposition on bulk metallic glasses Qiu SB, Yao KF |
3459 - 3462 |
Preparation of super-hydrophobic surface on stainless steel Chen LJ, Chen M, Hui HD, Chen JM |
3463 - 3465 |
Room-temperature synthesis of crystallized luminescent CaMoO4 film by a simple chemical method Cui CH, Bi J, Gao DJ |
3466 - 3469 |
Growth and properties of BiFeO3 thin films deposited on LaNiO3-buffered SrTiO3(001) and (111) substrates by PLD Zhu J, Luo WB, Li YR |
3470 - 3470 |
Using light to bioactivate surfaces: A new way of creating oriented, active immunobiosensors (vol 254, pg 1126, 2007) Duroux M, Gurevich L, Neves-Petersen MT, Skovsen E, Duroux L, Borrebaeck CAK, Wingren C, Petersen SB |