375 - 384 |
Light management in dye-sensitized solar cell Park NG |
385 - 389 |
Friendly production of bacterial inclusion bodies Garcia-Fruitos E, Villaverde A |
390 - 398 |
Hydrodynamic behavior of an electrified thin film flowing down an inclined plane at high Reynolds numbers Park S, Kim H |
399 - 408 |
Development of a risk assessment program for chemical terrorism Lee Y, Kim J, Kim J, Kim J, Moon I |
409 - 415 |
Effect of aspect ratio and fluid elasticity on chain orientation in isothermal film casting process Lee JS, Kim JM |
416 - 421 |
Scaling behavior of a wormlike polyelectrolyte chain by mesoscopic Brownian dynamics simulations Chun MS |
422 - 430 |
Alkaline earth metal oxides on γ-Al2O3 supported Co catalyst and their application to mercaptan oxidation Vasefi S, Parvari M |
431 - 434 |
Effect of preparation method on structure and catalytic activity of Cr-promoted Cu catalyst in glycerol hydrogenolysis Kim ND, Oh S, Joo JB, Jung KS, Yi J |
435 - 438 |
Photocatalytic removal of methyl orange in an aqueous solution by a WO3/TiO2 composite film He J, Cai QZ, Luo Q, Zhang DQ, Tang TT, Jiang YF |
439 - 445 |
Preparation of Pt/C catalysts by electroless deposition for proton exchange membrane fuel cells Sriring N, Tantavichet N, Pruksathorn K |
446 - 451 |
Cycloaddition of carbon dioxide to butyl glycidyl ether using imidazolium salt ionic liquid as a catalyst Yu JI, Ju HY, Kim KH, Park DW |
452 - 458 |
Reduction of lean NO2 with diesel soot over metal-exchanged ZSM5, perovskite and γ-alumina catalysts Lee DW, Song SJ, Lee KY |
459 - 464 |
Removal of sulfur dioxide from dibenzothiophene sulfone over Mg-based oxide catalysts prepared by spray pyrolysis Park YK, Kim SY, Kim HJ, Jung KY, Jeong KE, Jeong SY, Jeon JK |
465 - 468 |
Acidity and acid catalysis of polyatom-substituted HnPW11M1O40 (M=V, Nb, Ta, and W) Keggin heteropolyacid catalysts Park DR, Hong UG, Song SH, Seo JG, Baeck SH, Chung JS, Song IK |
469 - 473 |
Recovery of cellulases by adsorption/desorption using cation exchange resins Wu JC, Ng KR, Chong J, Yang KJ, Lam XP, Nam CT, Nugroho AJ |
474 - 479 |
Effects of organic acid catalysts on the hydrogen generation from NaBH4 Moon GY, Lee SS, Yang GR, Song KH |
480 - 486 |
Suppression of carbon formation in steam reforming of methane by addition of Co into Ni/ZrO2 catalysts Harshini D, Kwon Y, Han J, Yoon SP, Nam SW, Lim TH |
487 - 493 |
Studies on the modeling of a molten carbonate fuel cell (MCFC) 5 kW class stack Lee SY, Lim HC, Chung GY |
494 - 503 |
A study on the formation of photochemical air pollution and the allocation of a monitoring network in Busan Yoo EC, Park OH |
504 - 510 |
Settling state detection of SBR based on DO profile analysis using dynamic time warping Kim Y, Bae H, Kim H, Shin J, Kim C |
511 - 517 |
Evaluation of the buffing volume in last third flocculation basin using CFD Cho Y, Yoo S, Hwang Y, Roh J, Yoo P, Kim C |
518 - 523 |
Surface hydrophobicity alteration of fractionated paraffin wax, crude by-product polyolefin wax and their blend Lee EJ, Lee YS, Lim KH |
524 - 530 |
Comparison of thermal properties of crude by-product polyolefin wax, fractionated paraffin wax and their blend Lee EJ, Park JK, Lee YS, Lim KH |
531 - 535 |
Analysis and removal of the stench emitted from indoor dust Kim YH, Jung H, Changshin S, Kim DH |
536 - 545 |
A modelling study on hydrolysis of whey lactose and stability of β-galactosidase Demirhan E, Apar DK, Ozbek B |
546 - 550 |
Generation behavior of elctricity in a microbial fuel cell Trinh NT, Park JH, Kim SS, Lee JC, Lee BY, Kim BW |
551 - 559 |
Effects of nitrogen source and carbon/nitrogen ratio on batch fermentation of glutathione by Candida utilis Wang D, Wei G, Nie M, Chen J |
560 - 566 |
Influence of pulsed electric field on growths of soil bacteria and pepper plant Seo HN, Jeon BY, Tran HT, Ahn DH, Park DH |
567 - 569 |
Changes in total lipid contents of marine diatom Nitzschia frustulum at various temperatures under Si deficiency Ryu K, Rorrer GL |
570 - 575 |
Improvement of cephalosporin C production by Acremonium chrysogenum M35 in submerged culture with glass beads or silicone rubber Lee HH, Song YS, Kim SW |
576 - 586 |
Issues with increasing bioethanol productivity: A model directed study Song HS, Ramkrishna D |
587 - 589 |
Overexpression of ethionine resistance gene for maximized production of S-adenosylmethionine in Saccharomyces cerevisiae sake kyokai No. 6 Lee SW, Park BS, Choi ES, Oh MK |
590 - 595 |
Equation of state for gaseous ethane determined from isotropic model potentials Monago K |
596 - 601 |
Transfer rate measurement of lysozyme by liquid-liquid extraction using reverse micelles with dense CO2 Jung SM, Shin UM, Uddin MS, Park SY, Kishimura H, Wilkinson G, Chun BS |
602 - 608 |
Adsorption and desorption of m-xylene vapor on organically modified montmorillonite Ryu CY, Yeo SD |
609 - 618 |
Modeling and simulation of a simulated moving bed for adsorptive para-xylene separation Lee J, Shin NC, Lim Y, Han C |
619 - 623 |
Purification of naphthalene from eutectic mixture by continuous column crystallization Li Q, Yi Z, Sun X, Su M |
624 - 631 |
Removal of sulfur compounds in FCC raw C4 using activated carbon impregnated with CuCl and PdCl2 Kim KS, Park SH, Park KT, Chun BH, Kim SH |
632 - 638 |
Breakthrough data analysis of adsorption of volatile organic compounds on granular activated carbon Oh KJ, Park DW, Kim SS, Park SW |
639 - 644 |
Decontamination of radioactive soil wastes using an agglomeration-leaching process Lee JJ, Moon J, Kim GN, Lee KW |
645 - 650 |
Sintering characteristics of TiO2 nanoparticles by microwave processing Jung S, Kim JH |
651 - 657 |
Effect of chemical treatments of wood fibers on the physical strength of polypropylene based composites Gwon JG, Lee SY, Chun SJ, Doh GH, Kim JH |
658 - 665 |
Rheological property and curing behavior of poly(amide-co-imide)/multi-walled carbon nanotube composites Lee SH, Choi SH, Choi JI, Lee JR, Youn JR |
666 - 671 |
Preparation of ADNBF with low-acidity by reactive crystallization Kim JW, Kim JK, Kim EJ, Kim HS, Koo KK |
672 - 676 |
Photo-catalytic degradation of rhodamine B using microwave powered electrodeless discharge lamp Chae JS, Jung DS, Bae YS, Park SH, Lee DJ, Kim SJ, Kim BH, Jung SC |
677 - 682 |
Characterization of differently shaped carbon fiber composites prepared from naphtha cracking bottom oil Eom SY, Pyo DW, Ryu SK |
683 - 687 |
Enhanced efficiency of white polymer light-emitting diodes with inorganic nanodots Zhu X, Lee DH, Chae H, Cho SM |
688 - 692 |
Antibacterial activity of silver nanoparticles prepared by a chemical reduction method Lee SM, Song KC, Lee BS |
693 - 696 |
Optical characterizations of GaN nanorods fabricated by natural lithography Kim BJ, Bang J, Kim SH, Kim J |
697 - 704 |
Fabrication of CdS thin films assisted by Langmuir deposition, self-assembly, and dip-pen nanolithography Lee GS, Lee JH, Choi H, Ahn DJ |
705 - 715 |
Effect of added ionomer on morphology and properties of PP/organoclay nanocomposites Lim HT, Liu H, Ahn KH, Lee SJ, Hong JS |
716 - 722 |
Polymer-coated magnetic carbonyl iron microparticles and their magnetorheological characteristics Park BJ, Fang FF, Zhang K, Choi HJ |
723 - 728 |
Ultrasound assisted batch-processing of EVA-organoclay nanocomposites Ahn Y, Kim H, Lee JW |
729 - 729 |
Erratum: Statistically Modeled Adsorption Isotherms for the Multilayer Gas Molecules Adsorbed on Non-porous Solid Adsorbents of Two and Three Groups Sites [Korean J. Chem. Eng., 17(2), 156 (2000)] Kim D |
730 - 730 |
Erratum: Statistical Condensation Adsorption Isotherms of Gas Molecules Adsorbed on Porous Adsorbents, Surface Monolayer Adsorption Isotherms and Hysteresis Phenomena [Korean J. Chem. Eng., 17(5), 600 (2000)] Kim D |