1 - 9 |
ZnWO4 nanorods decorated with Ag/AgBr nanoparticles as highly efficient visible-light-responsive photocatalyst for dye AR18 photodegradation Li KB, Xue J, Zhang YH, Wei H, Liu YL, Dong CX |
10 - 20 |
Amidoxime-grafted multiwalled carbon nanotubes by plasma techniques for efficient removal of uranium(VI) Wang Y, Gu ZX, Yang JJ, Liao JL, Yang YY, Liu N, Tang J |
21 - 29 |
Wetting and other physical characteristics of polycarbonate surface textured using laser ablation Yilbas BS, Khaled M, Abu-Dheir N, Al-Aqeeli N, Said SAM, Ahmed AOM, Varanasi KK, Toumi YK |
30 - 42 |
Plasmonics effect of Ag nanoislands covered n-Al:ZnO/p-Si heterostructure Venugopal N, Kaur G, Mitra A |
43 - 51 |
A high efficient method for introducing reactive amines onto carbon fiber surfaces using hexachlorocyclophosphazene as a new coupling agent Xu HB, Zhang XQ, Liu D, Chun Y, Fan XY |
52 - 59 |
A novel method of reducing agent contacting pattern for metal ceramic composite membrane fabrication Agarwal A, Pujari M, Uppaluri R, Verma A |
60 - 72 |
Surface modification of Fe2O3 nanoparticles with 3-aminopropyltrimethoxysilane (APTMS): An attempt to investigate surface treatment on surface chemistry and mechanical properties of polyurethane/Fe2O3 nanocomposites Palimi MJ, Rostami M, Mahdavian M, Ramezanzadeh B |
73 - 82 |
Fabrication of iron-doped cobalt oxide nanocomposite films by electrodeposition and application as electrocatalyst for oxygen reduction reaction Zhang JX, Wang XM, Qin DD, Xue ZH, Lu XQ |
83 - 92 |
Surface characteristics and damage of monocrystalline silicon induced by wire-EDM Punturat J, Tangwarodomnukun V, DumkumDepartment C |
93 - 101 |
Covalent attachment of cell-adhesive peptide Gly-Arg-Gly-Asp (GRGD) to poly(etheretherketone) surface by tailored silanization layers technique Zheng YY, Xiong CD, Li XY, Zhang LF |
102 - 111 |
Surface functionalization by fine ultraviolet-patterning of nanometer-thick liquid lubricant films Lu RG, Zhang HD, Komada S, Mitsuya Y, Fukuzawa K, Itoh S |
112 - 119 |
Robust removal of heavy metals from water by intercalation chalcogenide [CH3NH3](2x)MnxSn3-xS6.0.5H(2)O Lia JR, Wang X, Yuan BL, Fu ML, Cui HJ |
120 - 127 |
Simple preparation of Mn-N-codoped TiO2 photocatalyst and the enhanced photocatalytic activity under visible light irradiation Quan F, Hu Y, Zhang X, Wei CH |
128 - 137 |
Structural evolution and defect control of yttrium-doped ZrO2 films grown by a sol-gel method Jeong KS, Song J, Lim D, Lee MS, Kim H, Cho MH |
138 - 145 |
Preparation of a magnetic molecularly imprinted polymer for selective recognition of rhodamine B Liu XY, Yu D, Yu YC, Ji SJ |
146 - 153 |
Magnetically separable ternary hybrid of ZnFe2O4-Fe2O3-Bi2WO6 hollow nanospheres with enhanced visible photocatalytic property Li JQ, Liu ZX, Zhu ZF |
154 - 160 |
A combined ToF-SIMS and XPS study for the elucidation of the role of water in the performances of a Post-Plasma Process using LaMnO3+delta as catalyst in the total oxidation of trichloroethylene Nuns N, Beaurain A, Dinh MTN, Vandenbroucke A, De Geyter N, Morent R, Leys C, Giraudon JM, Lamonier JF |
161 - 170 |
Osteogenic potential of in situ TiO2 nanowire surfaces formed by thermal oxidation of titanium alloy substrate Tan AW, Ismail R, Chua KH, Ahmad R, Akbar SA, Pingguan-Murphy B |
171 - 176 |
Comparison of in situ and ex situ reduced graphene oxide reinforced electroless nickel phosphorus nanocomposite coating Sadhir MH, Saranya M, Aravind M, Srinivasan A, Siddharthan A, Rajendran N |
177 - 182 |
In situ chemical state analysis of buried polymer/metal adhesive interface by hard X-ray photoelectron spectroscopy Ozawa K, Kakubo T, Shimizu K, Amino N, Mase K, Ikenaga E, Nakamura T, Kinoshita T, Oji H |
183 - 187 |
Magnetic properties of hematite (alpha-Fe2O3) nanoparticles prepared by hydrothermal synthesis method Tadic M, Panjan M, Damnjanovic V, Milosevic I |
188 - 194 |
SnO2 thin films grown by atomic layer deposition using a novel Sn precursor Choi MJ, Cho CJ, Kim KC, Pyeon JJ, Park HH, Kim HS, Han JH, Kim CG, Chung TM, Park TJ, Kwon B, Jeong DS, Baek SH, Kang CY, Kim JS, Kim SK |
195 - 199 |
Laser cladding of stainless steel with a copper silver alloy to generate surfaces of high antimicrobial activity Hans M, Tamara JC, Mathews S, Bax B, Hegetschweiler A, Kautenburger R, Solioz M, Mucklich F |
200 - 206 |
Solvent polarity effect on quality of n-octadecanethiol self-assembled monolayers on copper and oxidized copper Zhang YZ, Zhou J, Zhang XL, Hu J, Gao H |
207 - 212 |
Mechanism for controlling buckling wrinkles by curved cracks on hard-nano-film/soft-matter-substrate Wu D, Yin YJ, Yang F, Xie HM |
213 - 217 |
Thickness effect of hematite nanostructures prepared by hydrothermal method for solar water splitting Pu AW, Deng JJ, Hao YY, Sun XH, Zhong J |
218 - 224 |
Preparation of flexible zinc oxide/carbon nanofiber webs for mid-temperature desulfurization Kim S, Bajaj B, Byun CK, Kwon SJ, Joh HI, Yi KB, Lee S |
225 - 230 |
Surface structure and chemistry of Pt/Cu/Pt(111) near surface alloy model catalyst in CO Zeng SB, Nguyen L, Cheng F, Liu LC, Yu Y, Tao F |
231 - 236 |
Theoretical studies of urea adsorption on single wall boron-nitride nanotubes Chermahini AN, Teimouri A, Farrokhpour H |
237 - 243 |
Stability and electronic structure of iron nanoparticle anchored on defective hexagonal boron nitrogen nanosheet: A first-principle study Lin S, Huang J, Ye XX |
244 - 255 |
Surface/structure functionalization of copper-based catalysts by metal-support and/or metal-metal interactions Konsolakis M, Ioakeimidis Z |
256 - 262 |
Adsorption and dehydrogenation mechanism of methane on clean and oxygen-covered Pd (100) surfaces: A DFT study Jiang Z, Wang B, Fang T |
263 - 266 |
Chemically manipulated anomalous Hall effect and perpendicular magnetic anisotropy in Co/Pt multilayers Jiang SL, Chen X, Zhang JY, Yang G, Teng J, Li XJ, Cao Y, Zhao ZD, Yang K, Liu Y, Yu GH |
267 - 273 |
Abrasion resistance of magnesium alloys with surface films generated from phosphonate imidazolium ionic liquids Espinosa T, Jimenez AE, Martinez-Nicolas G, Sanes J, Bermudez MD |
274 - 280 |
Effects of passive films on corrosion resistance of uncoated SS316L bipolar plates for proton exchange membrane fuel cell application Yang Y, Ning XH, Tang HS, Guo LJ, Liu HT |
281 - 286 |
Anode modification with formic acid: A simple and effective method to improve the power generation of microbial fuel cells Liu WF, Cheng S, Guo J |
287 - 293 |
A scanning tunneling microscopy investigation of the phases formed by the sulfur adsorption on Au(100) from an alkaline solution of 1,4-piperazine(bis)-dithiocarbamate of potassium Martinez JA, Valenzuela J, Milan RC, Herrera J, Farias MH, Hernandez MP |
294 - 300 |
Chemical modification of hygroscopic magnesium carbonate into superhydrophobic and oleophilic sorbent suitable for removal of oil spill in water Patowary M, Ananthakrishnan R, Pathak K |
301 - 308 |
Doxorubicin poly N-vinylpyrrolidone and poly N-isopropylacrylamide-co-N-vinylpyrrolidone coated magnetic nanoparticles Habibi D, Kaamyabi S, Amini MM |
309 - 314 |
Growth of CdS thin films on indium coated glass substrates via chemical bath deposition and subsequent air annealing Ghosh B, Kumar K, Singh BK, Banerjee P, Das S |
315 - 321 |
On the dependence of structural and sensing properties of sputtered MoO3 thin films on argon gas flow Khojier K, Savaloni H, Zolghadr S |
322 - 327 |
A durable, superhydrophobic, superoleophobic and corrosion-resistant coating with rose-like ZnO nanoflowers on a bamboo surface Jin CD, Li JP, Han SJ, Wang J, Sun QF |
328 - 333 |
Friction behavior of nano-textured polyimide surfaces measured by AFM colloidal probe Zhang XL, Wu CX, Che HW, Hou JX, Jia JH |
334 - 338 |
One dimensional silicon nanostructures prepared by oxidized porous silicon under heat treatment Vendamani VS, Pathak AP, Rao SVSN |
339 - 347 |
Evaluation of reduced graphene oxide/ZnO effect on properties of PVDF nanocomposite films Jaleh B, Jabbari A |
348 - 355 |
A highly sensitive ethanol sensor based on Ag@TiO2 nanoparticles at room temperature Zhu Z, Kao CT, Wu RJ |
356 - 363 |
Characterization of organo-modified bentonite sorbents: The effect of modification conditions on adsorption performance Parolo ME, Pettinari GR, Musso TB, Sanchez-Izquierdo MP, Fernandez LG |
364 - 371 |
Improvement on mechanical properties and wear resistance of HVOF sprayed WC-12Co coatings by optimizing feedstock structure Ma N, Guo L, Cheng ZX, Wu HT, Ye FX, Zhang KK |
372 - 378 |
Optical properties of PbS-doped silica optical fiber materials based on atomic layer deposition Dong YH, Wen JX, Pang FF, Chen ZY, Wang J, Luo YH, Peng GD, Wang TY |
379 - 382 |
MoO3 trapping layers with CF4 plasma treatment in flash memory applications Kao CH, Chen H, Chen SZ, Chen CY, Lo KY, Lin CH |
383 - 390 |
Novel magnetically recoverable BiOBr/iron oxides heterojunction with enhanced visible light-driven photocatalytic activity Guo CS, He Y, Du P, Zhao X, Lv JP, Meng W, Zhang Y, Xu J |
391 - 399 |
BNNTs under the influence of external electric field as potential new drug delivery vehicle of Glu, Lys, Gly and Ser amino acids: A first-principles study Farmanzadeh D, Ghazanfary S |
400 - 413 |
Catalytic evaluation of dendrimer-templated Pd nanoparticles in the reduction of 4-nitrophenol using Langmuir-Hinshelwood kinetics Noh JH, Meijboom R |
414 - 428 |
Use of 3-aminopropyltriethoxysilane deposited from aqueous solution for surface modification of III-V materials Knorr DB, Williams KS, Baril NF, Weiland C, Andzelm JW, Lenhart JL, Woicik JC, Fischer DA, Tidrow MZ, Bandara SV, Henry NC |
429 - 434 |
Preparation of antibacterial coating based on in situ synthesis of ZnO/SiO2 hybrid nanocomposite on cotton fabric Barani H |
435 - 440 |
Fabrication and characterization of carbon nanofiber@mesoporous carbon core-shell composite for the Li-air battery Song MJ, Shin MW |
441 - 447 |
Evolution of interfacial intercalation chemistry on epitaxial graphene/SiC by surface enhanced Raman spectroscopy Ferralis N, Carraro C |
448 - 454 |
Fusion protein-based biofilm fabrication composed of recombinant azurin-myoglobin for dual-level biomemory application Lee T, Chung YH, Yoon J, Min J, Choi JW |
455 - 465 |
The influence of the gas environment on morphology and chemical composition of surfaces micro-machined with a femtosecond laser Lehr J, de Marchi F, Matus L, MacLeod J, Rosei F, Kietzig AM |
466 - 470 |
Changes in the structure and tribological property of Ag film by LEO space environment exposure Gao X, Hu M, Sun JY, Fu YL, Yang J, Weng LJ, Liu WM |
471 - 481 |
Plasma surface oxidation of 316L stainless steel for improving adhesion strength of silicone rubber coating to metal substrate Latifi A, Imani M, Khorasani MT, Joupari MD |
482 - 486 |
Interactions of Sn2+ dopant ions located on surface sites of anatase-type TiO2 with adsorbed H2S molecules studied using Sn-119 Mossbauer spectroscopic probe Fabritchnyi PB, Afanasov MI, Astashkin RA, Wattiaux A, Labrugere C |
487 - 493 |
Hydrothermal synthesis of rutile-anatase TiO2 nanobranched arrays for efficient dye-sensitized solar cells Kwon SJ, Im HB, Nam JE, Kang JK, Hwang TS, Yi KB |
494 - 501 |
Influences of film thickness and annealing temperature on properties of sol-gel derived ZnO-SnO2 nanocomposite thin film Lee SM, Joo YH, Kim CI |
502 - 508 |
Point defects engineering in graphene/h-BN bilayer: A first principle study Yuan JM, Wei Z, Zhong JX, Huang YP, Mao YL |
509 - 513 |
Coordination-resolved local bond relaxation, electron binding-energy shift, and Debye temperature of Ir solid skins Bo ML, Wang Y, Huang YL, Yang XX, Yang YZ, Li C, Sun CQ |
514 - 518 |
Micronization of red-emitting K2SiF6:Mn4+ phosphor by pulsed laser irradiation in liquid Nakamura T, Yuan Z, Adachi S |
519 - 523 |
Formation of Me-O-Si covalent bonds at the interface between polysilazane and stainless steel Amouzou D, Fourdrinier L, Maseri F, Sporkena R |
524 - 530 |
Structural characterization of MAPLE deposited lipase biofilm Aronne A, Ausanio G, Bloisi F, Calabria R, Califano V, Fanelli E, Massoli P, Vicari LRM |
531 - 537 |
Synergetic effect of potassium molybdate and benzotriazole on the CMP of ruthenium and copper in KIO4-based slurry Cheng J, Wang TQ, Mei HG, Zhou WB, Lu XC |
538 - 543 |
Structure adhesion and corrosion resistance study of tungsten bisulfide doped with titanium deposited by DC magnetron co-sputtering De la Roche J, Gonzalez JM, Restrepo-Parra E, Sequeda F, Alleh V, Scharf TW |
544 - 551 |
Graphene preparation by annealing of Co/SiC structure Machac P, Cichon S, Miskova L, Vondracek M |
552 - 557 |
Research on the nanocrystal FeVxOy catalysts for new reaction from propane to propylene and CO Li YH, Chen S, Xu AX, Ma F, Chen F, Lu WM |
558 - 562 |
Deep surface rolling for fatigue life enhancement of laser clad aircraft aluminium alloy Zhuang W, Liu Q, Djugum R, Sharp PK, Paradowska A |
563 - 569 |
Chitosan-nanosilica hybrid materials: Preparation and properties Podust TV, Kulik TV, Palyanytsya BB, Gun'ko VM, Toth A, Mikhalovska L, Menyhard A, Laszlo K |
570 - 580 |
Prediction of optimized composition for enhanced mechanical and electrochemical response of Zr-C-N-Ag coatings for medical devices Calderon S, Oliveira JC, Evaristo M, Cavaleiro A, Carvalho S |
581 - 590 |
Corrosion behaviour of a rapidly solidified Al87.4Co7.9Ce4.7 layer prepared by large area electron beam irradiation Li CL, Murray JW, Voisey KT, Clare AT, McCartney DG |
591 - 595 |
Enhancing the SERS performance of semiconductor nanostructures through a facile surface engineering strategy Jin LL, She GW, Wang XT, Mu LX, Shi WS |
596 - 601 |
Cytotoxicity of protein corona-graphene oxide nanoribbons on human epithelial cells Mbeh DA, Akhavan O, Javanbakht T, Mahmoudi M, Yahia L |
602 - 608 |
Interfacial stability and diffusion barrier ability of Ti1-xZrxN coatings by pulsed laser thermal shock Jeon S, Ha J, Choi Y, Jo I, Lee H |
609 - 613 |
Direct synthesis of Co2Al(OH)(7-2x)(CO3)(x).nH(2)O layered double hydroxide nanolayers by successive ionic layer deposition and their capacitive performance Lobinsky AA, Tolstoy VP, Gulina LB |
614 - 619 |
Lotus-leaf-like structured chitosan-polyvinyl pyrrolidone films as an anti-adhesion barrier Lim JI, Kang MJ, Lee WK |
620 - 626 |
Growth of SiC nanowires on wooden template surface using molten salt media Ding J, Zhu HX, Li GQ, Deng CJ, Li J |
627 - 633 |
Production of NiSi phase by grain boundary diffusion induced solid state reaction between Ni2Si and Si(100) substrate Shenouda SS, Langer GA, Katona GL, Daroczi L, Csik A, Bekea DL |
634 - 642 |
Characteristics of flexographic printed indium-zinc-oxide thin films as an active semiconductor layer in thin film field-effect transistors Dilfer S, Hoffmann RC, Dorsam E |
643 - 652 |
Deactivation of Ni2P/SiO2 catalyst in hydrodechlorination of chlorobenzene Chen JX, Ci DH, Yang Q, Li KL |
653 - 657 |
The effect of annealing on structural and optical properties of alpha-Fe2O3/CdS/alpha-Fe2O3 multilayer heterostructures Saleem M, Durrani SMA, Saheb N, Al-Kuhaili MF, Bakhtiari IA |
658 - 663 |
Combining hierarchical surface roughness with fluorinated surface chemistry to preserve superhydrophobicity after organic contamination Wang CF, Hung SW, Kuo SW, Chang CJ |
664 - 669 |
Surface state modulation through wet chemical treatment as a route to controlling the electrical properties of ZnO nanowire arrays investigated with XPS Lord AM, Maffeis TG, Allen MW, Morgan D, Davies PR, Jones DR, Evans JE, Smith NA, Wilks SP |
670 - 673 |
The interfacial strength improvement of SMA composite using ZnO with electrochemical deposition method Zhao LM, Feng X, Mi XJ, Li YF, Xie HF, Yin XQ |
674 - 680 |
Preparation and characterization of activated carbon from reedy grass leaves by chemical activation with H3PO4 Xu JZ, Chen LZ, Qu HQ, Jiao YH, Xie JX, Xing GG |
681 - 688 |
Insights into the effect of coverage on CO adsorption and dissociation over Rh(100) surface: A theoretical study Zhao XJ, Zhang RG, Ling LX, Wang BJ |
689 - 698 |
Effects of Si content on microstructure and mechanical properties of TiALN/Si3N4-Cu nanocomposite coatings Feng CJ, Hu SL, Jiang YF, Wu NM, Li MS, Xin L, Zhu SL, Wang FH |
699 - 702 |
Photo luminescent properties of Ce-doped HfOxNy thin films prepared by magnetron sputtering Chen S, Liu ZT, Feng LP, Tan TT, Zhao XR |
703 - 709 |
The role of carbon in the photocatalytic reaction of carbon/TiO2 photocatalysts Teng F, Zhang GZ, Wang YQ, Gao CT, Chen LL, Zhang P, Zhang ZX, Xie EQ |
710 - 717 |
An investigation on sol-gel treatment to aramid yarn to increase inter-yarn friction Chu YY, Chen XG, Wang Q, Cui SZ |
718 - 724 |
Electrochemical behavior and biological response of Mesenchymal Stem Cells on cp-Ti after N-ions implantation Rizwan M, Ahmad A, Deen KM, Haider W |
725 - 731 |
Sol-gel synthesis of nano structured indium tin oxide with controlled morphology and porosity Korosi L, Scarpellini A, Petrik P, Papp S, Dekany I |
732 - 735 |
Laser induced augmentation of silver nanospheres to nanowires in ethanol fostered by Poly Vinyl Pyrrolidone Sebastian S, Linslal CL, Vallabhan CPG, Nampoori VPN, Radhakrishnan P, Kailasnath M |
736 - 741 |
Fabrication of P3HT/gold nanoparticle LB films by P3HT templating Langmuir monolayer Chen LH, Hsu WP, Chan HW, Lee YL |
742 - 745 |
Synthesis and enhancement of red UC luminescence properties of ordered hexagonal NaYF4:Yb3+/Er3+ nanowire arrays Wang ZJ, Lu ZB, Ruan DC, Tao F, Liu Q, Wang H, Sun YF |
746 - 755 |
Preparation and characterization of TiN-doped Ti/SnO2-Sb electrode by dip coating for Orange II decolorization Duan Y, Wen Q, Chen Y, Duan TG, Zhou YD |
756 - 763 |
Effect of oxygen on active Al concentration in ZnO: Al thin films made by PLD Kodu M, Arroval T, Avarmaa T, Jaaniso R, Kink I, Leinberg S, Savi K, Timusk M |
764 - 771 |
novel method of synthesizing cyclodextrin grafted multiwall carbon nanotubes/iron oxides and its adsorption of organic pollutant Liu W, Jiang XY, Chen XQ |
772 - 779 |
CdS nanoparticle sensitized titanium dioxide decorated graphene for enhancing visible light induced photoanode Yousefzadeh S, Faraji M, Nien YT, Moshfegh AZ |
780 - 786 |
Effect of the size of silica nanoparticles on wettability and surface chemistry of sol-gel superhydrophobic and oleophobic nanocomposite coatings Lakshmi RV, Bera P, Anandan C, Basu BJ |
787 - 790 |
Lattice spacings and domain sizes of room-temperature epitaxial LixNi1-xO (0 <= x <= 0.48) thin films grown on ultra-smooth sapphire substrates Yang AL, Sakata O, Yamauchi R, Katsuya Y, Kumara LSR, Shimada Y, Matsuda A, Yoshimoto M |
791 - 797 |
Oxidation and interdiffusion behavior of Niobium substrate coated MoSi2 coating prepared by spark plasma sintering Yan JH, Wang Y, Liu LF, Wang YM |
798 - 803 |
Photo- and thermionic emission of MWPECVD nanocrystalline diamond films Cicala G, Magaletti V, Valentini A, Nitti MA, Bellucci A, Trucchi DM |
804 - 809 |
Photoluminescence enhancement of Si nanocrystals embedded in SiO2 by thermal annealing in air Li YL, Liang PP, Hu ZG, Guo S, Cai H, Huang FL, Sun J, Xu N, Wu JD |
810 - 817 |
Surface cell immobilization within perfluoroalkoxy microchannels Stojkovic G, Krivec M, Vesel A, Marinsek M, Znidarsic-Plazl P |
818 - 828 |
The synthesis of hydrogels with controlled distribution of polymer brushes in hydrogel network Sun YW, Zhou C, Zhang AK, Xu LQ, Yao F, Cen L, Fu GD |
829 - 837 |
Comparative study of surface integrity aspects of Incoloy 825 during machining with uncoated and CVD multilayer coated inserts Thakur A, Mohanty A, Gangopadhyay S |
838 - 842 |
SrCoO3-delta thin films by atomic layer deposition Ahvenniemi E, Matvejeff M, Karppinen M |
843 - 851 |
Effect of the presence of cationic polyacrylamide on the surface properties of aqueous alumina suspension-stability mechanism Wisniewska M, Chibowski S, UrbanDepartment T |
852 - 857 |
Origin of the stabilization of the metastable tetragonal high-pressure phase in SrCuO2 thin films grown on SrTiO3 substrates by pulsed laser deposition Mihailescu CN, Pasuk I, Straticiuc M, Nita CR, Pantelica D, Giapintzakis J |
858 - 862 |
Structural and magnetic properties of cobalt nanostructures on SiO2/Si(111) substrates Bounour-Bouzamouche W, Cherif SM, Farhat S, Roussigne Y, Tallaire A, Gicquel A, Lungu CP, Guerioune M |
863 - 870 |
On the synthesis of a compound with positive enthalpy of formation: Zinc-blende-like RuN thin films obtained by rf-magnetron sputtering Cattaruzza E, Battaglin G, Riello P, Cristofori D, Tamisaric M |
871 - 882 |
Extracellular matrix inspired surface functionalization with heparin, fibronectin and VEGF provides an anticoagulant and endothelialization supporting microenvironment Wang X, Liu T, Chen Y, Zhang K, Maitz MF, Pan CJ, Chen JY, Huang N |
883 - 894 |
Effect and origin of the structure of hyperbranched polysiloxane on the surface and integrated performances of grafted Kevlar fibers Zhang HR, Yuan L, Liang GZ, Gu AJ |
895 - 900 |
Effect of alcohol vapor treatment on electrical and optical properties of poly(3,4-ethylene dioxythiophene):poly(styrene sulfonate) films for indium tin oxide-free organic light-emitting diodes Fallahzadeh A, Saghaei J, Yousefi MH |
901 - 907 |
Triple-junction InGaP/GaAs/Ge solar cells integrated with polymethyl methacrylate subwavelength structure Kim DS, Jeong Y, Jeong H, Jang JH |
908 - 913 |
Characterization and analysis on atomic oxygen resistance of POSS/PVDF composites Liu YZ, Sun Y, Zeng FL, Zhang QH, Geng L |